Preview only show first 10 pages with watermark. For full document please download

Wise 7118z

   EMBED


Share

Transcript

WISE (Web Inside, Smart Engine) Analog Input & Digital Output 1 Features Ethernet I/O Modules Built-in Web Server for IF-THEN-ELSE rule setting Built-in IF-THEN-ELSE rule enigne for logic operation No more programming. Just click and get done! Support IO, Counter, Timer, Email operations Modbus/TCP Protocol for SCADA Software Seamless Integration IEEE 802.3af-compliant Power over Ethernet (PoE) 10/100 Base-TX Ethernet Support Current Input, Voltage Input and Thermocouple Input WISE-7118Z 10-channel Thermocouple Input with High Voltage Protection and 6-channel Isolated Output PoE Module Over Voltage Protection is up to 240 Vrms 6-channel Digital Outputs 2-way Isolation/ESD Protection xxxxxxxxxxxxxxxxx Introduction WISE (Web Inside, Smart Engine) is a product series developed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications. WISE offers a user-friendly and intuitive web site interface that allows users to implement IF-THEN-ELSE control logic on controllers just a few clicks away; no programming is required. With its powerful and easy-to-use features, it will minimize the learning curve, shorten time to market and dramatically reduce the effort and cost spent on system development. WISE-7118Z follows IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) specification. It allows receiving power from PoE enabled network by Ethernet pairs (Category 5 Ethernet cable). This feature provides greater flexibility and higher efficiency therefore simplifying systems design, saving space, reducing cables and eliminating the requirement for dedicated electrical outlets. Meanwhile, in case under a non-PoE environment, WISE-7118Z will still be able to receive power from auxiliary power sources like AC adapters or battery, etc. This multi-function module WISE-7118Z supports Modbus/TCP protocol to make seamless integration with SCADA software available. It features 16-bit, 10-channel differential analog inputs and 6-channel digital ouputs. Each analog channel is allowed to configure an individual range and has 240 Vrms high over voltage protection. 3 Applications System Specifications Building Automation, Factory Automation, Machine Automation, Remote Maintenance, Remote diagnosis and Testing Equipment, etc. WISE-71xx Series (Web based PoE) CF WISE-7118Z 1-3-? I/O Specifications Analog Input Input Channels 10 (Differential) +/-15 mV, +/-50 mV, +/-100 mV, +/-500 mV, +/-1 V, +/-2.5 V +/-20 mA, 0 ~ 20 mA, 4 ~ 20 mA (Requires Input Type Optional External 125 Ω Resistor) Thermocouple (J, K, T, E, R, S, B, N, C, L, M, LDIN43710) Resolution 16-bit Sampling Rate 10 Samples/Sec. (Total) Accuracy Zero Drift +/-0.1% or better +/-0.5 uV/°C Span Drift +/-25 ppm/°C Overvoltage Protection Input Impedance 240 Vrms Common Mode Rejection 150 dB Min. Normal Mode Rejection Individual Channel Configuration Yes Communication PoE Ethernet Port 10/100 Base-TX (With Link, Activity LED Indicator) and automatic MDI/MDI-X 2 Way Isolation I/O 2500 VDC EMS Protection ESD (IEC 61000-4-2) 4 kV Contact for each terminal and 8 kV Air for random point EFT (IEC 61000-4-4) +/-4 kV for Power PoE On L1 System Running L2 Ethernet Link/Act L3 Ethernet 10/100M Speed Yes Yes, 12 ~ 48 VDC Yes, IEEE 802.3af, Class1 3.0 W Dimensions (W x H x D) 72 mm x 123 mm x 35 mm Output Channels 6 Output Type Isolated Open Collector (Sink) ICP DAS CO., LTD 16 KB Watchdog Consumption Mechanical Digital Output 700 mA/Channel 512 KB EEPROM Reserve Polarity Protection Powered from terminal block Powered from PoE Yes 5 VDC ~ 50 VDC 60 VDC 1.4 A Yes 512 KB Flash Memory Power Requirements 100 dB Yes Load Voltage Overvoltage Protection Overload Protection Short-circuit Protection 16-bit CPU SRAM PoE Power >300 kΩ Max. Load Current CPU LED Indicators Temperature outputs Yes consistency Stable temperature output Yes in the field Open Wire Detection System Installation Environment Operating Temperature DIN-Rail or Wall mounting -25 °C ~ +75 °C Storage Temperature -30 °C ~ +80 °C Humidity 10 ~ 90% RH, non-condensing Professional Provider of High Quality Industrial Computer Products and Data Acquisition System 型錄書名(目前未定,暫用Remote I/O Catalog) Software Specifications IF Conditions Functions Rule Configuration Website Access Web server on WISE controllers to edit and upload logic rules through web browser. 3 IF conditions with AND or OR operators 36 IF-THEN-ELSE Logic Rules 3 THEN actions and 3 ELSE actions Hold temporary variables and read/write data via Modbus/TCP address. 12 Timers Delay / Timing functions. 12 Emails Send Email messages to pre-set Email receivers. 12 CGI Commands Send pre-set CGI commands. 12 Recipes Set up THEN/ELSE action groups. 8 P2P remote modules Set up the connection information for the remote WISE modules. Modbus/TCP Protocol Real time control and monitoring I/O channels and system status of controllers via SCADA software. 1 =、>、<、>=、<=(value) =、>、<、>=、<=(value)、Change Timeout、Not Timeout DI、AI、DI counter、DO counter、IR Enable、Disable WISE IF-THEN-ELSE Rule Engine THEN / DO Channel Internal Register DO Counter Timer Email CGI Commands Recipe P2P Rule Status ELSE Actions ON、OFF、Pulse Output Change the value Reset Start、Stop Send Execute DO(On/Off)、AO、IR Enable、Disable Pin Assignment Terminal No. Pin Assignment RJ-45 E1 23 RL5 COM E1 01 DO0 02 DO1 03 DO2 04 DO3 IN3 05 DO4 IN1 IN5 RL4 COM 1 IN4 IN2 IN0 06 DO5 07 ISO.GND 08 09 (R)+Vs (B)GND RL4 NO WISE-7118Z 01 RL5 NO E1 RL3 COM RL3 NO RL2 COM RL2 NO RL1 NO RL0 COM IN.COM RL0 NO 13 14 15 16 17 18 19 20 21 22 23 24 F.G. F.G. AGND AGND 0+ 5+ 051+ 6+ 162+ 7+ 273+ 8+ 384+ 9+ 94- N/A (R)Vs+ L1 L2 (B)GND 9 L3 09 COM1 RL1 COM 1 2 3 4 5 6 7 8 9 10 11 12 Ethernet I/O Modules 48 Internal Registers AI Channel Internal Register DO Counter Timer P2P Rule Status 10 N/A DB-1820 CON1 3 F.G. AGND AGND CH0+ CH0- CH5+ CH1+ CH6+ CH1CH2+ CH6- CH2- CH7- CH3+ CH8+ CH8- CH5- CH7+ CH3CH4+ CH4- CON1 CH9+ CH9- D -1822 Wire Connection Voltage Input (Default) + mV/V V - WISE-71xx Series (Web based PoE) F.G. Digital Output CH+ CH- LOAD ON State Readback as 1 DOx ISO.GND 5 ~ 50 VDC Thermocouple Input (Default) CH+ - CH- OFF State Readback as 0 LOAD ISO.GND 5 ~ 50 VDC Current Input DOx WISE-7118Z + CH+ CH125 Ω Note: When connecting to a current source, an optional external 125 Ω resistor is required. Website: http://wise.icpdas.com E-mail: [email protected] 1-3-? Analog I/O Modules 1 Dimensions (Unit: mm) 35 31.5 Ethernet I/O Modules 56.0 116.0 56.0 Top View 2-SCREW M3 35 32.9 72.0 39.5 Front View Right Side View Bottom View Back View Din Rail Mounting Bracket DB-1820 22 65 12.8 73.3 Top View 78 15.0 64.1 3 10.8 12.8 Bottom View Left Side View WISE-7000 Series (Web based PoE) DN-1822 27.0 103 Top View 85.5 96 Bottom View Left Side View Accessories Ordering Information WISE-7118Z/S2 Right Side View Back View Front View WISE-7118Z/S CF Back View Front View 22 15.0 10.8 57.9 10-channel Thermocouple Input with High Voltage Protection and 6-channel Isolated Output PoE Module (RoHS) and DB-1820 daughter board. 10-channel Thermocouple Input with High Voltage Protection and 6-channel Isolated Output PoE Module (RoHS) and DN-1822 daughter board and 1.8m cable. GPSU06U-6 24V/0.25A, 6 W Power Supply MDR-20-24 24V/1A, 24 W Power Supply with DIN-Rail Mounting NS-205 CR Unmanaged 5-Port Industrial Ethernet Switch (RoHS) CD-2518D 25F-25M 1.8 m Cable with DIN-Rail Mount of DB-1820 CD-25015 25F-25M 15 cm Cable with DIN-Rail Mount of DB-1820 NS-205PSE CR 5-Port Industrial PoE Ethernet Switch (RoHS) WISE-7118Z ET-7018Z Connects DB-1820 Directly 1-3-? ICP DAS CO., LTD ET-7018Z Connect DB-1820 with CD-2518D Kit ET-7018Z Connect DB-1820 with CD-25015 kit Professional Provider of High Quality Industrial Computer Products and Data Acquisition System