Transcript
WISE (Web Inside, Smart Engine)
I/O Expansion Boards
1
Features
Ethernet I/O Modules
Built-in Web Server for IF-THEN-ELSE rule setting Built-in IF-THEN-ELSE rule enigne for logic operation No more programming. Just click and get done! Support IO, Counter, Timer, Email operations Modbus/TCP Protocol for SCADA Software Seamless Integration IEEE 802.3af-compliant Power over Ethernet (PoE) 10/100 Base-TX Ethernet I/O expansion bus
WISE-7901/WISE-7901D
Support DI/DO X-Boards: X107, X109, X110, X111 Support Multi-Function X-Boards: X202, X203, X303, X304, X305, X308, X310, X324
User-defined I/O Expansion PoE Module
Introduction WISE (Web Inside, Smart Engine) is a product series developed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications. WISE offers a user-friendly and intuitive web site interface that allows users to implement IF-THEN-ELSE control logic on controllers just a few clicks away; no programming is required. With its powerful and easy-to-use features, it will minimize the learning curve, shorten time to market and dramatically reduce the effort and cost spent on system development. WISE-7901 follows IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) specification. It allows receiving power from PoE enabled network by Ethernet pairs (Category 5 Ethernet cable). This feature provides greater flexibility and higher efficiency therefore simplifying systems design, saving space, reducing cables and eliminating the requirement for dedicated electrical outlets. Meanwhile, in case under a non-PoE environment, WISE-7901 will still be able to receive power from auxiliary power sources like AC adapters or battery, etc. This module WISE-7901 supports Modbus/TCP protocol to make seamless integration with SCADA software available. It supports an I/O expansion bus to implement various I/O functions such as D/I, D/O, A/D, D/A according to the using X-Board.
3
Applications Building Automation, Factory Automation, Machine Automation, Remote Maintenance, Remote diagnosis and Testing Equipment, etc.
WISE-790x Series (Web based PoE)
Specifications Models
WISE-7901
CPU
16-bit CPU
SRAM
512 KB
Flash
512 KB
EEPROM
16 KB
NVRAM
31 Bytes
OS
MiniOS7
RTC (Real Time Clock)
RTC Provide seconds, minutes, hours, date of week/month; month and year, valid from 1980 to 2079
64-bit Hardware Serial Number
Yes
Watchdog Timers
Yes (0.8 second)
Communication Ports Ethernet
RJ-45 x 1, 10/100 Base-TX Ethernet Controller (Auto-negotiating, Auto_MDIX, LED indicators)
COM 1
No (Unsupported by WISE firmware)
COM 2
No (Unsupported by WISE firmware)
LED Indicator Yes (Red)
System LED
CF
LED Display
-
Special Indicator
PoE LED (Green)
5-digit 7-segment LED display
Hardware Expansion Yes
I/O Expansion Bus Mechanical
WISE-7901
Dimensions (W x H x D)
72 mm x 123 mm x 35 mm
Installation
DIN-Rail or Wall Mounting
Environmental Operating Temperature
-25 ~ +75 °C
Storage Temperature
-40 ~ +80 °C
Ambient Relative Humidity
5 ~ 90% RH (non-condensing)
Power Protection
Power reverse polarity protection
Frame Ground
Yes (for ESD Protection)
Input Range
1-3-?
WISE-7901D
CPU Module
+12 ~ +48 VDC
Power over Ethernet (PoE)
IEEE 802.3af Class 1
Power Consumption
1.5 W
ICP DAS CO., LTD
2.5 W
Professional Provider of High Quality Industrial Computer Products and Data Acquisition System
型錄書名(目前未定,暫用Remote I/O Catalog)
Software Specifications Functions
3 IF conditions with AND or OR operators 36 IF-THEN-ELSE Logic Rules 3 THEN actions and 3 ELSE actions 48 Internal Registers
Hold temporary variables and read/write data via Modbus/TCP address.
12 Timers
Delay / Timing functions.
12 Schedules
Setup prescheduled routine tasks.
12 Emails
Send Email messages to pre-set Email receivers.
12 CGI Commands
Send pre-set CGI commands.
12 Recipes
Set up THEN/ELSE action groups.
8 P2P remote modules
Set up the connection information for the remote WISE modules.
Modbus/TCP Protocol
Real time control and monitoring I/O channels and system status of controllers via SCADA software.
=、>、<、>=、<=(value) =、>、<、>=、<=(value)、Change Timeout、Not Timeout In Range、Out of Range DI、AI、DI counter、DO counter、IR Enable、Disable THEN / DO Channel AO Channel Internal Register DI Counter DO Counter Timer Schedule Email CGI Commands Recipe P2P Rule Status
WISE IF-THEN-ELSE Rule Engine
N/A
CAN_L
N/A 3
Link/Act 23
23 RL5 COM
E1
E1
COM1
L1
IN5
1
IN4
RL4 COM
Change the value Reset Start、Stop Send Execute DO(On/Off)、AO、IR Enable、Disable
RL4 NO RL3 COM RL3 NO RL2 COM
Pin Assignment
23
-
22
-
21
-
20
-
19
-
18
-
17
-
16
-
15
-
14
-
13
-
12
-
01
CTS1
02
RTS1
03
RxD1
04
TxD1
05
INIT*
06
D2+
07
D2-
08
(R)+Vs
11
-
09
(B)GND
10
-
L2
PAC -7186EXD-CAN
L3
IN3 IN2 IN1 IN0
RL1 COM RL1 NO RL0 COM RL0 NO
(R)Vs+
N/A 9
10
10 N/A
L1
(B)GND
L2
CPU: 80186-80 09 CAN: Support CAN 2.0A/2.0B E1: Ethernet 10/100 Base TX COM1: RS-232 COM2: RS-485
RL2 NO
IN.COM
L3
COM2
01
MiniOS 7
RL5 NO
E1
WISE-7901
10/100M
ELSE Actions ON、OFF、Pulse Output
Terminal No.
5
N/A
2
4 CAN_H
N/A
1
CAN_L
N/A
3
5
N/A
2
Pin Assignment
4 CAN_H
1
Pin Assignment Terminal No.
1
IF Conditions ON、OFF、ON to OFF、OFF to ON、Change
Dimensions (Unit: mm)
Wiring & Boarding
3
35.0
(R)+Vs
D2-
D2+
INIT*
TxD1
RxD1
RTS1
CTS1
RS-485 Network
GND 10 ~ 30 VDC
10.9
31.7
35.4
123.0 101.2
56.0
31.7 8.0
RS-232 Device
10.9 32.3 59.2 72.0
Left Side View
Front View
35
Bottom View
CF
X-Board
User-defined I/O Expansion PoE Module (RoHS)
WISE-7901D
User-defined I/O Expansion PoE Module with LED Display (RoHS)
Accessories GPSU06U-6
24V/0.25A, 6 W Power Supply
MDR-20-24 NS-205 CR
24V/1A, 24 W Power Supply with DIN-Rail Mounting Unmanaged 5-Port Industrial Ethernet Switch (RoHS)
NS-205PSE CR I/O Expansion Boards
Unmanaged 5-Port Industrial PoE Ethernet Switch (RoHS) Other add-on expansion boards: X107, X109, X110, X111, X202, X203, X303, X304, X305, X308, X310, X324 Email:
[email protected]
WISE-7901
Ordering Information WISE-7901
Website: http://wise.icpdas.com
WISE-790x Series (Web based PoE)
Ethernet Internet Intranet
COM2
(B)GND 9
1
49.8 COM1
Ethernet I/O Modules
DI Channel AI Channel Internal Register DI Counter DO Counter Timer Schedule P2P Rule Status
Access Web server on WISE controllers to edit and upload logic rules through web browser.
Rule Configuration Website
1-3-?
