Wj-gxe100 1ch H.264 Real-time Network Video Encoder

Transcript

1CH H.264 Video Encoder WJ-GXE100 1CH H.264 Real-time Network Video Encoder Key Features • Full frame H.264 transmission • H.264 and JPEG triple encoding: A total of 3 outputs, comprising of 2 H.264 outputs and 1 JPEG output, can be provided. • Motion adaptive interlace/progressive conversion allows every frame to be clear even when the subject is moving. • Open command conversion table for RS485 ensures the control of various manufacture’s PTZ camera. • Camera title display: Up to 20 alphanumeric characters embedded in the image • PoE. The power will be supplied by simply connecting a LAN cable. (IEEE802.3af compliant) 12 V DC power supply* is also available. • Small size. And can be installed into the outdoor housing with a camera. • Alarm sources including VMD, Command alarm, and Video loss • VMD (Video Motion Detector) with 4 programmable detection areas • Internet mode: H.264 images can be transmitted by over HTTP protocol. • Multi-language GUI and setup menu: English, French, Italian, Spanish, German, Russian, Chinese, Japanese • IPv4/IPv6 protocol supported • Onvif compliant model * For UL listed model(s), only connect 12 V DC Class 2 power supply. Standard Accessories • Installation Guide....................................................................................................1 pc. • CD-ROM*1 ..............................................................................................................1 pc. • Code label*2............................................................................................................1 pc. • Power cord plug.....................................................................................................1 pc. • Cable tie ....................................................................................... 2 pcs. (incl. 1 spare) *1 The CD-ROM contains the operating instructions and different kinds of tool software programs. *2 This label may be required for network management. The network administrator shall retain the code label. Unit Title Camera Title (OSD) Clock Display Alarm Control One Shot Capture GUI/Setup Menu Language System Log Supported OS *1 *2 Supported Browser Network Network IF Picture (Camera) Image Resolution mode [4:3] Picture (Camera) mode [16:9] Picture (Camera) mode [D1] Transmission Mode H.264*3 Frame Rate Bit Rate/Client Image Quality Refresh Interval Transmission Type Image Quality JPEG Refresh Interval Transmission Type Total Bit Rate Supported Protocol Alarm Input/ Output General FTP Client No. of Simultaneous Users Cellular Phone Compatibility Mobile Terminal Compatibility*5 Alarm Source Alarm Actions RS485 Port Safety/EMC Standard Power Source and Power Consumption Ambient Operating Temperature Ambient Operating Humidity Dimensions Mass (approx.) Finish PAL 1 V [p-p]/75 Ω, NTSC or PAL composite video signal* * NTSC and PAL can be switched in the setup menu. pan / tilt / zoom / focus / preset positions / auto focus / brightness Panasonic/Pelco-D/Pelco-P/Custom Up to 16 camera images can be displayed simultaneously on a multi-screen. (Including the camera itself) Up to 20 characters Up to 20 characters (alphanumeric characters, marks) On/Off Time: 12H/24H, Date: 5 formats on the browser, Summer time (Auto / Manual) Reset A still picture will be displayed on a newly opened window. English, French, Italian, Spanish, German, Russian, Chinese, Japanese Up to 100 (Internal) Microsoft® Windows® 7 Microsoft® Windows Vista® Microsoft® Windows® XP Professional SP3 Windows® Internet Explorer® 9.0 32 bit Windows® Internet Explorer® 8.0 32 bit Windows® Internet Explorer® 7.0 32 bit Internet Explorer® 6.0 SP3 10Base-T / 100Base-TX, RJ-45 connector H.264: VGA (640x480)/QVGA (320x240), max. 30 fps H.264: VGA (640x480)/QVGA (320x240), max. 25 fps JPEG: VGA (640x480)/QVGA (320x240), max. 30 fps JPEG: VGA (640x480)/QVGA (320x240), max. 25 fps H.264: 640x360/320x180, max. 30 fps H.264: 640x360/320x180, max. 25 fps JPEG: 640x360/320x180, max. 30 fps JPEG: 640x360/320x180, max. 25 fps H.264: D1 (720x480), max. 30 fps H.264: D1 (720x576), max. 25 fps JPEG: D1 (720x480), max. 30 fps JPEG: D1 (720x576), max. 25 fps Constant bitrate / Framerate priority / Best effort 1 / 3 / 5 / 7.5 / 10 / 15 / 20 / 30 fps 1 / 3.1 / 4.2 / 6.25 / 8.3 / 12.5 / 20 / 25 fps 64 / 128 / 256 / 384 / 512 / 768 / 1,024 / 1,536 / 2,048 / 3,072 / 4,096 kbps Low / Normal / Fine 0.2 / 0.25 / 0.33 / 0.5 / 1 / 2 / 3 / 4 / 5 s Unicast / Multicast 10 steps 0.08 fps ~ 25 fps 0.1 fps ~ 30 fps (JPEG frame rate will be restricted when (JPEG frame rate will be restricted when displaying both JPEG and H.264 images.) displaying both JPEG and H.264 images.) Pull / Push 64 / 128 / 256 / 384 / 512 / 768 / 1,024 / 2,048 / 4,096 / 8,192 kbps / Unlimited IPv6: TCP/IP, UDP/IP, HTTP, HTTPS, RTP, FTP, SMTP, DNS, NTP, SNMP, DHCPv6, MLD, ICMPv6 IPv4: TCP/IP, UDP/IP, HTTP, HTTPS, RTSP, RTP, RTP/RTCP, FTP, SMTP, DHCP, DNS, DDNS, NTP, SNMP, UPnP, IGMP, ICMP, ARP Alarm image FTP transmission, FTP periodic image transmission*4 Up to 14 users (Depends on network conditions) JPEG image iPad, iPhone, iPod touch (iOS 4.2.1 or later), AndroidTM mobile terminals VMD, Command alarm, Video loss alarm E-mail notification Indication on browser, FTP image transfer, Panasonic protocol output 1x RS485 (4 wire / 2 wire, Full/Half duplex. Open command conversion table for other manufacturers' PTZ camera) UL (UL60950-1), FCC (Part15 ClassA), CE C-UL (CAN/CSA C22.2 No.60950-1), (EN55022 ClassB, EN55024) DOC (ICES003 ClassA) 12 V DC*: 200 mA, PoE 48 V: 75 mA (Class 1 device) * For UL listed model(s), only connect 12 V DC Class 2 power supply. -10 °C ~ +50 °C (14 °F ~ 122 °F) (During start-up: 0 °C to +50 °C {32 °F to 122 °F}) Less than 90 % (no condensation) 45 mm (W) x 29.5 mm (H) x 88 mm (D) {1-25/32 inches (W) x 1-5/32 inches (H) x 3-15/32 inches (D)} (excluding projections) Approx. 110 g {0.24 lbs} Unit (resin part): PC resin, sail white Unit (metal part): Electrogalvanized steel sheet, sail white coating Part Names and Functions Video Input terminal switch Terminated (default setting, on) Not terminated (off) 12 V DC Power Supply Terminal Network Connector Live Indicator Mounting Hole Ventilation Area (also on the other side of the unit) INITIAL SET Button Video Input Connector RS485 Port Video Input Terminal Switch Appearance ø3.5(1/8") 7(1/4") Browser GUI Camera Control Camera Control Protocol Display Mode NTSC 110(4-5/16") *1 For further information about PC system requirements and precautions for when using Microsoft® Windows® 7, Microsoft® Windows Vista®, or Windows® Internet Explorer®, click “Manual” - “Open” from the supplied CD-ROM and refer to “Notes on Windows®/Internet Explorer® versions”. *2 When using IPv6 for communication, use Microsoft® Windows® 7 or Microsoft® Windows Vista®. *3 Transmission for 2 streams can be individually set in the same compression method. *4 Not available when “D1” is selected for “Picture (Camera) mode”. *5 For further information about compatible devices, refer to our website (http://panasonic.net/pss/security/support/info.html). 29.5(1-5/32") 88(3-15/32") TV System Video IF Video Input Connector 100(3-15/16") Specifications ø3.5x4.5(1/8x3/16") 7.3(5/16") 45(1-25/32") Unit: mm(inches) Trademarks and registered trademarks – Microsoft, and Windows are registered trademarks of Microsoft Corporation in the U.S. and other countries. – iPad, iPhone and iPod touch are registered trademarks of Apple Inc. – Android is a trademark of Google Inc. – UniPhier is a registered trademark of Panasonic Corporation. – "i-PRO SmartHD" logos are trademarks or registered trademarks of Panasonic Corporation. – All other trademarks identified herein are the property of their respective owners. Important – Safety Precaution: Carefully read the operating instructions and installation manual before using this product. – Panasonic cannot be responsible for the performance of the network and/or other manufacturers' products used on the network. • Masses and dimensions are approximate. • Specifications are subject to change without notice. • These products may be subject to export control regulations. DISTRIBUTED BY: http://panasonic.net/security/ http://www.facebook.com/PanasonicNetworkCamera Printed in Japan (2A-104AL) 4CH H.264 Video Encoder WJ-GXE500 High density, three WJ-GXE500 units fit into 1U rack. 4CH H.264 Real-time Network Video Encoder Key Features • Full frame H.264 transmission for each 4 channels • Dual streams of H.264 (High profile) and JPEG at VGA / D1 image size • Motion adaptive interlace/progressive conversion allows every frame to be clear even when the subject is moving. • Compensates the picture degration caused by long-distance cable maintaining clear picture • Coaxial communication ensures the control of Panasonic PTZ cameras via coaxial cable. • Open command conversion table for RS-485 ensures the control of various manufacture’s PTZ camera. • SD/SDHC Memory card slot for manual recording, alarm recording, and backup upon network failure (JPEG) • Camera title display: Up to 16 alphanumeric characters embedded in the image • Full duplex bi-directional audio allows interactive communication. • PoE. The power will be supplied by simply connecting a LAN cable. (IEEE802.3af compliant) • Small size. And can be installed into the rack with mounting brackets. (Option) • Alarm sources including 3 terminal input, VMD, camera site alarm, video loss, and Panasonic alarm • VMD (Video Motion Detector) with 4 programmable detection areas • Face detection detect the position of human face, the information is sent by XML or video stream. (Ch1 only) • Meta data for VMD is supplied to work with the WJ-ND400 playback VMD function. • Internet mode: H.264/MPEG-4 images can be transmitted by over HTTP protocol. • Multi-language GUI and setup menu: English, French, Italian, Spanish, German, Russian (PAL) / English, French (NTSC) * Installation required except for English • IPv4/IPv6 protocol supported Standard Accessories • CD-ROM*1 .....................................1 pc. • Installation Guide ...........................1 pc. • Code Label*2 ................................. 1 pc. Optional Accessory EIA19 inch Rack Mount Bracket WV-Q204/2S (for mounting three WJ-GXE500) *1 The CD-ROM contains the operating instructions (PDFs) and different kinds of tool software programs. *2 This label may be required for network management. The network administrator shall retain the code label. Part Names and Functions Unit Title Camera Title (OSD) Clock Display Alarm Control One Shot Capture Audio SD Memory Data Download GUI/Setup Menu Language System Log Supported OS Supported Browser Network Network IF Image Resolution H.264/ Transumission Mode MPEG-4* Frame Rate JPEG Bit Rate/Client Image Quality Refresh Interval Transmission Type Image Quality Refresh Interval Transmission Type Audio Compression Audio Mode Authentification for Audio Total Bit Rate Supported Protocol FTP Client No. of Simultaneous Users SDHC/SD Memory Card (Option) Alarm Input/ Output Face Detection Alarm Source Alarm Action Alarm Log Terminal RS-485 Port General Safety/EMC Standard Power Source and Power Consumption Ambient Operating Temperature Ambient Operating Humidity Dimensions Weight (approx.) * H.264 and MPEG-4 are alternative. Behind the SDHC/SD memory card slot cover Rear View Network Connector SDHC/SD Memory Card Error Indicator Operation Indicator Access Indicator Link Indicator INITIAL SET Button SDHC/SD Memory Card Slot SIGNAL GND Terminal Cable Clamp Video Input Connectors Set Switches Microphone/Line Input Connector Audio Output Connector RS-485 Port External I/O Terminals 12 V DC Power Supply Terminals Appearance 98(3-7/8") Display Mode 38(1-1/2") Audio Output Camera Control 11(7/16") Browser GUI Front View 13(1/2") Microphone/Line Input NTSC PAL 4x 1.0 V [p-p] / 75 Ω NTSC 4x 1.0 V [p-p] / 75 Ω PAL composite video inputs (BNC) composite video inputs (BNC) Multiplexed control data and cable Multiplexed control data and cable compensation compatible: 1 ~ 4 CH compensation compatible: 1 ~ 4 CH MIC IN and Line IN are selectable. ø3.5 mm stereo mini jack (monaural input) (Applicable microphone: Plug-in power type) Supply voltage: 2.5 V ±0.5 V Input impedance: approx. 2 kΩ ø3.5 mm stereo mini jack (monaural output) Line level Pan / tilt / zoom / focus / preset positions / auto focus (When using Panasonic P/T/Z cameras) Spot, Quad: Image from 16 cameras can be displayed in 4 different Quad screens (JPEG only). 20 characters camera title available. Up to 20 characters Up to 16 characters On/Off Time: 12H/24H, Date: 5 formats on the browser, Summer time (Manual) Reset A still picture will be displayed on a newly opened window. Mic (Line) Input: ON / OFF Volume adjustment: Low / Middle / High, Audio Output: ON / OFF Volume adjustment: Low/Middle/High Still or motion Images recorded in the SD/SDHC memory card can be downloaded. English, French English, French, Italian, (Installation required for French) Spanish, German, Russian (Installation required except for English) Up to 100 (Internal), Up to 4,000 (SD memory when the recording format is set to JPEG.) error logs Microsoft® Windows® 7 Professional 64 bit/32 bit, Microsoft® Windows Vista® Business SP1 32 bit, Microsoft® Windows® XP Professional SP3 The language of the OS must be same as selected GUI language. Windows® Internet Explorer® 8.0 32 bit (Microsoft® Windows® 7 64 bit/32bit), Windows® Internet Explorer® 7.0 (Microsoft® Windows Vista® Business SP1 32 bit), Microsoft® Internet Explorer® 6.0 SP3 (Microsoft® Windows® XP Professional SP3) 10Base-T / 100Base-TX, RJ-45 connector VGA mode: VGA (640 x 480) / VGA mode: VGA (640 x 480) / QVGA (320 x 240) QVGA (320 x 240) D1 mode: D1 (720 x 480) D1 mode: D1 (720 x 576) Constant bitrate / Framerate priority 1 / 3 / 5 / 7.5 / 10 / 15 / 20 / 1 / 3.1 / 4.2 / 6.25 / 8.3 / 12.5 / 30 fps 20 / 25 fps 64 / 128 / 256 / 384 / 512 / 768 / 1,024 / 1,536 / 2,048 / 3,072 / 4,096 kbps / Unlimited Low / Normal / Fine 0.2 / 0.33 / 0.5 / 1 / 2 / 3 / 4 / 5 s UNICAST / MULTICAST 10 steps 0.1 fps ~ 30 fps 0.08 fps ~ 25 fps (JPEG frame rate will be restricted (JPEG frame rate will be restricted when displaying both JPEG when displaying both JPEG and H.264/MPEG-4 images.) and H.264/MPEG-4 images.) PULL / PUSH G.726 (ADPCM), 32 kbps / 16 kbps, CH1 only. OFF / Mic (Line) input / Audio output / Interactive (Half duplex) / Interactive (Full duplex) Level 1 only / Level 2 higher / All users 64 / 128 / 256 / 384 / 512 / 768 / 1,024 / 2,048 / 4,096 / 8,192 kbps / Unlimited IPv6: TCP/IP, UDP/IP, HTTP, RTP, FTP, SMTP, DNS, NTP, SNMP IPv4: TCP/IP, UDP/IP, HTTP, RTSP, RTP, RTP/RTCP, FTP, SMTP, DHCP, DNS, DDNS, NTP, SNMP Periodic image transfer, Alarm image transfer (When the FTP transmission is failed, backup on an optional SDHC/SD memory card is available.) Up to 16 users (Depends on network conditions) Alarm REC / Backup upon network failure / Manual REC (JPEG only) Compatible SD (SDHC) card: Panasonic 256 MB, 512 MB, 1 GB, 2 GB, 4 GB*, 8 GB*, 16 GB*, 32 GB* model * SDHC card On / Off (with XML notification) (Ch1 only) 3 terminal input, VMD, Command alarm, Camera site alarm, Video loss alarm SDHC/SD memory recording, E-mail notification, Alarm terminal output, Indication on browser, FTP image transfer, Panasonic protocol output With SDHC/SD memory card: 5,000 logs, without SDHC/SD memory card: 1,000 logs Terminal 1: Alarm input, Terminal 2: Alarm input/Alarm output, Terminal 3: Alarm input/Alarm output/AUX output 1x RS-485 (RJ-11, 4 wire / 2 wire, Full/Half duplex. Open command conversion table for Other manufactuer's PTZ camera) UL (UL60065), FCC (Part15 ClassA), CE (EN55022, ClassB, C-UL (CAN/CSA C22.2 No.60065), EN55024) DOC (ICES003 ClassA) 12 V DC: 500 mA, PoE (IEEE802.3af): 6 W (Class 0 device) –10 °C ~ +50 °C (14 °F ~ 122 °F) 90 % or less (without condensation) 140 mm (W) x 44 mm (H) x 185 mm (D) (5-1/2" x 1-3/4" x 7-9/32") (excluding rubber feet and projections) 1.0 kg (2.21 lbs.) 185(7-9/32") TV System Audio/ Video Input Video IF 4(3/16") 44(1-3/4") Specifications 90(3-9/16") 140(5-1/2") 29(1-1/8") Unit: mm (inches) Trademarks and registered trademarks – Microsoft, and Windows are registered trademarks of Microsoft Corporation in the U.S. and other countries. – "Super Dynamic", "SDII", "SDIII", "SD5", "SD5Link", "i-PRO" and "i-PRO SmartHD" logos are trademarks or registered trademarks of Panasonic Corporation. Important – Safety Precaution: carefully read the operating instructions and installation manual before using this product. – Panasonic can not be responsible for network performance and/or other manufacturer products that reside on the network. • All TV pictures are simulated. • Weights and dimensions are approximate. • Specifications are subject to change without notice. • These products may be subject to export control regulations. • All product pictures are NTSC models. DISTRIBUTED BY: http://panasonic.net/security/ Printed in Japan (2A-056AL)