Transcript
WM-FX661/FX663/FX665 SERVICE MANUAL
AEP Model WM-FX661/FX663/FX665
Ver 1.1 2002. 01
E Model Chinese Model WM-FX663/FX665
UK Model Australian Model WM-FX665
Canadian Model WN-FX663 Photo : WM-FX661
RADIO CASSETTE PLAYER 9-924-908-12
Sony Corporation
2002A1600-1 © 2002.1
Personal Audio Company Published by Sony Engineering Corporation
TABLE OF CONTENTS Specification ················································································· 1
1. GENERAL ·········································································· 3 2. SERVICE NOTE ······························································· 3 3. DISASSEMBLY 3-1. 3-2. 3-3. 3-4. 3-5.
Case Assy Removal ······················································· 4 Tuner Board Removal ··················································· 4 Audio Board Removal ··················································· 5 Cassette Lid Assy Removal ··········································· 5 Mechanism Deck Removal ··········································· 6
4. MECHANICAL ADJUSTMENT ·································· 7 5. ELECTRICAL ADJUSTMENT ···································· 7 6. DIAGRAMS ········································································ 9 6-1. 6-2. 6-3. 6-4. 6-5. 6-6.
Block Diagram ······························································ 9 IC Pin Function Description ········································ 11 Printed Wiring Boards (Tuner Section) ······················· 13 Schematic Diagram (Tuner Section) ··························· 17 Schematic Diagram (Audio Section) ··························· 20 Printed Wiring Board (Audio Section) ························ 23
7. EXPLODED VIEWS 7-1. Cabinet Section ··························································· 29 7-2. Audio, Tuner Board Section ········································ 30 7-3. Mechanism Section (MT-WMEX550-125) ················· 31
8. ELECTRICAL PARTS LIST ······································· 32
SAFETY-RELATED COMPONENT WARNING!! COMPONENTS IDENTIFIED BY MARK ! OR DOTTED LINE WITH MARK ! ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT À LA SÉCURITÉ! LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE ! SUR LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
Flexible Circuit Board Repairing • Keep the temperature of the soldering iron aroud 270˚ C during repairing. • Do not touch the soldering iron on the same conductor of the circuit board (within 3 times). • Be careful not to apply force on the conductor when soldering or unsoldering. Notes on chip component replacement • Never reuse a disconnected chip component. • Notice that the minus side of a tantalum capacitor may be damaged by heat.
—2—
SECTION 1 GENERAL • LOCATION OF CONTROL 1 OPEN knob 2 PRESET + /AMS FF button 3 PRESET – /AMS REW button
1
4 TUNING + button
!¢
5 TUNING – button 6 ENTER button
2
7 ˇ /REPEAT button
4 7
8 p /RADIO OFF button
!`
9 MENU button
!“
0 SET button
5 6 3
!` VOLUME knob
9 ! 0
!£
HOLD knob
!“
8
!£
2 REMOTE jack
!¢ Display window !
BAND button
SECTION 2 SERVICE NOTE • Regarding the method of adjustment and voltage check, perform sections 3-1 and 3-2 of the DISASSEMBLY, and attach the JIG (extension cable) to the AUDIO board as shown below. JIG Part No. : J-2503-005-A
Screw (M1.4 × 5.0)
Screw (M1.4 × 5.0)
TUNER board
Screw JIG (M1.4 × 5.0) Screw (M1.7 × 4.0)
AUDIO board
—3—
SECTION 3 DISASSEMBLY Note : Disassemble the unit in the order as shown below.
SET
CASE ASSY
TUNER BOARD
AUDIO BOARD
CASSETTE LID ASSY
MECHANISM DECK
Note : Follow the disassembly procedure in the numerical order given.
3-1.
CASE ASSY REMOVAL 4 Screws (M1.4 × 2.2)
6 Case assy
2 Screw (M1.4 × 2.2)
3 Screw (M1.4 × 2.2)
1 Screw (M1.4 × 3)
5
3-2.
TUNER BOARD REMOVAL 1 Screws (M1.7 × 6) 2 Screw (M1.7 × 3)
4 TUNER board
3 Screw (M1.4 × 4.5) 6 GUIDE (TU)
5
—4—
3-3.
AUDIO BOARD REMOVAL
7 AUDIO board
2 Remove solder
1 Screw (M1.7 × 3)
6 4 Flexible board
3 Remove solder 5
3-4.
CASSETTE LID ASSY REMOVAL 2 Screw (M1.4 × 2) 5 Cassette lid assy
3 Screw (M1.4 × 2)
4
1 OPEN button
—5—
3-5.
MECHANISM DECK REMOVAL
2
1 4 Reel ornament
3
5 Mechanism deck
—6—
SECTION 4 MECHANICAL ADJUSTMENT 1.
2. 3. 4. 5.
SECTION 5 ELECTRICAL ADJUSTMENT
PRECAUTION Clean the following parts with a denatured-alcahol-moistened sweb : Playback head Pinch roller Rubber belt Capstan Demagnetize the playback head using a demagnetizer. Do not use a magnetized screwdriver for adjustments. After adjusting, apply screw-locking compound onto the adjusted parts. Unless specified otherwise, use a specified voltage (1.3V) to perform the adjustments.
1. 2.
PRECAUTION Specified voltage : 1.3V Switch position DOLBY NR switch : OFF AVLS switch : OFF
CASSETTE SECTION Test Tape Type WS-48A
Signal 3kHz, 0dB
Purpose Tape Speed Adjustment
Torqu Measurement Mode FWD FWD Back Tension REV REV Back Tension FF REW
Torqu meter CQ-102C
Meter reading 20 to 30 g · cm
Tape Speed Adjustmnet Procedure : Test tape WS-48A (3kHz, 0dB)
0.4 to 2.0 g · cm 20 to 30 g · cm
CQ-102RC CQ-201B
0.4 to 2.0 g · cm
16Ω Frequency counter Set
+ –
More than 40 g · cm PHONES jack
1.
2.
Playback WS-48A (Tape center part) in the FWD state and adjust RV601 so that the frequency counter reading becomes 2,970Hz to 3030Hz. Playback WS-48A (Tape center) in the REV state. Check that frequency counter reading is within 60Hz of the reading of step1.
Adjustment Point : [MAIN BOARD] — SIDE A —
RV601 : Tape speed
—7—
FM VCO Adjustment Procedure :
TUNER SECTION [AM] BAND switch : AM AM RF signal generator
FM RF signal generator 0.01µF to ANT (TP1)
Put the lead-wire antenna close to the set.
Carrier frequency : 98MHz Modulation : No moduration Output level : 0.1V (100dB)
30% amplitude modulation by 400Hz signal. Output level : as low as possible
1. 2. 3.
[FM] BAND switch : FM
Connect the frequency counter to the positions shown below. Turn the set to 98MHz. Adjust RV1 for 18,900 to 19,100 Hz reading on the frequency counter. Frequency counter
FM RF signal generator
1µF
TP23 (IC7 pin !™)
+ –
0.01µF
100Ω IC7 pin 9
to ANT (TP1) 22.5kHz frequency deviation by 400Hz signal. Output level : as low as possible. Level meter 32Ω + –
Set PHONES
• Repeat the procedures in each adjustment several times, and the frequency coverage and tracking adjustments should be finally done by the trimmer capacitors.
Adjustment Parts Location : [TUNER BOARD] — SIDE A — L2 : FM Voltage Adjustment
AM TRACKING ADJUSTMENT Adjust for a maximum reading on level meter. L4 621kHz CT1 1,395kHz
L3 : FM IF Adjustment
TP1
FM IF ADJUSTMENT Adjust for a maximum reading on level meter. L3 10.7MHz
(
CT1 : AM Tracking Adjustment
TP13 L4 : AM Tracking Adjustment
FM VOLTAGE ADJUSTMENT 1.05V to 1.15V (3.55 to 3.65V) L2 76MHz (87.5MHz) ) : Saudi Arabia model
RV1 : FM VCO Adjustment
—8—
SECTION 6 DIAGRAMS 6-1.
6-2. IC PIN FUNCTION DESCRIPTION • IC1 TC9326F-051
BLOCK DIAGRAM AUDIO POWER AMP IC301 FM FRONTEND IC3 1 RF IN
Q4 FM IF AMP
MIX 6
CF2 10.7MHz
FM IF AMP
Q1 T2 AM MIX
PRESCARER IC2 OSC 5
18 R CH
CF3 450kHz
6 AM IF IN
QUAD 7
34 FWD
64 AVLS 58 PW SW
D3
VCO 17
51 RF OUT 52 BASS
RV1
Q7
VCO
RF AMP
Q2
24 AM RF
T1 AM OSC
Q16,17
26 F/R SW 19 NR SW
Q5 BAND SELECT
LP2B 19 2 AM OSC
RADIO +B SWITCH
2.8V
AMS
VCC1
24
Q304
Q7 RADIO +B SWITCH
S901 ATS
Q301 (2/2)
BST IN 47
62 BST SW
Q18
VCC 5
Q15 IF REQ SWITCH
22
Q8
D4 L.P.F
PRE SW
53 PW VCC
LP2A 18
AM LOCAL/DX
INT
ACT
Pin No.
Function
Pin Name
INT
ACT
COM 1 to 3
I/O
Circuit
—
—
Common terminal.
Description
Remarks
70
FM IN
FM IN
—
—
Pre-scaler input.
4 to 25
S1 to 22
S1 to 22
—
—
Segment output terminal.
71
AM IN
AM IN
—
—
AM local oscillator output.
26
R DATA OUT
P13-1
H
—
Remote control data output.
O
Output
Q701,702 PLUNGER DRIVE
VCC2
PM901 PLUNGER
11 IF REQ LPF1 16
I/O
Circuit
Description
VLD at High level.
72
VDD
VDD
—
—
Power supply voltage.
Pull-up at outside
73
RESET
RESET
L
H
DDC1 CTL
P13-2
O Output (Nch) Hi-imp
L
DDC control terminal (when DDC ON = L).
RESET terminal (H during operation).
(TUNER side).
74
XOUT
XOUT
—
—
Terminal to which external oscillator is connected.
75
XIN
XIN
—
—
Terminal to which external oscillator is connected.
76
VXT
VXT
—
—
Pull-up at outside (Vcc).
77
VLCD
VLCD
—
—
Terminal to step-up power supply voltage for LCD drive.
C1
C1
—
—
Terminal to step-up power supply voltage for LCD drive.
28
BAND AM/FM
P13-3
O Output (Nch) Hi-imp
—
BAND control output (when AM = Hi-imp, when FM = L). Pull-up at outside (Vref).
29
MUTE CTL
P14-0
O Output (Nch) Hi-imp
L
MUTE control terminal (when MUTE ON = L).
30
F/R CTL
P14-1
O Output (Nch) Hi-imp
—
HEAD select terminal (when FWD = Hi-imp, when REV = L). Pull-up at outside (Vcc).
31
BST CTL
P14-2
O Output (Nch)
32
IF REQ
P14-3
O Output (Nch) Hi-imp
33
HOLD SW
IN2
I
Input
34
R DATA IN
K0
I
Input
35
HOLDER, TUME
K1
I
36
F/R SW
K2
I
37
HOLD SENS
K3
I
38
PHOTO CTL
P1-1
O Input/Output
L
H
Terminal for controlling the rotation detect circuit.
39
PHOTO IN
P1-2
I
Input/Output
—
—
Rotation detect input.
40
AMS CTL
P1-3
O Input/Output
L
H
AMS sensitivity select (when AMS = H, when BL.SKIP = L).
41
AMS IN
P2-0/AD IN1
I
—
—
Pull-up at outside (Vcc).
60 BEEP
4 MIX OUT L4 BAR ANT
Pin Name
COM 1 to 3
AGC 50
Q306 59 MUTE SW
RF OUT 8
Function
1 to 3
27
PW C 56
33 REV
L
Pin No.
R CH AVLS 63
AVLS CONT
Q301 (1/2)
DET 25
J701 REMOTE
L CH
57
Q302 Q303
7 PSC D1
COM
3 VOLUME RV301
REV CF4 10.7MHz
FM OUT 5
16
FWD L
2 FM IN D2
GND
L OUT 14 R OUT 15
FM LOCAL/DX
REMO
PWR 3 FM IF IN
VCC DATA
FM/AM RF,IF AMP IC7
Q6
CF1 10.7MHz
VCC1
Q14
IF OUT 10
Q13
L
Hi-imp Tone control terminal (when BOOST ON = Hi-imp, when OFF = L).
to stabilize crystal oscillator power supply.
L
IF REQ control terminal (when REQ = Hi-imp).
Pull-up at outside (Vref).
78
—
—
HOLDER detect input (when HOLDER CLOSE = H).
L
VCC
Input
—
Input
—
Input
L
Input/Output
Terminal to which external capacitor is connected
Pull-up at outside (VLCD).
79
C2
C2
—
—
Terminal to step-up power supply voltage for LCD drive.
Communication request from the remote controller. (H = VCC).
A/D input.
80
VEE
VEE
—
—
Terminal for 1.5 V constant voltage power supply of LCD drive.
—
HOLDER detect and TAPE error erase detect terminal.
A/D input.
—
TAPE rotating direction detect terminal.
A/D input.
AD Vrcl Input when the key is pressed during HOLD (H = AD Vref).
Tape sound existing or not-exiting detect (Music
A/D input.
Pull-down at outside.
Pull-up at outside.
exists: L, music does not exist: H.
S1-5,7-11 FUNCTION KEY IC6
S702 (F/R SW)
ON
S701
42
BATT DET
P2-1/AD IN2
I
Input/Output
—
—
Voltage detect input.
43
KEY IN
P2-2
I
Input/Output
H
—
KEY input terminal.
44
AD Vref
P2-3
I
Input/Output
—
—
Reference voltage of AD IN 1, 2.
45
LED CTL
P3-0
O Input/Output
L
H
LED output terminal.
46
CS
P3-1
O Input/Output
L
—
E2PROM CS control terminal.
47
M DATA I/O
P3-2
I/O Input/Output
L
—
E2PROM DATA I/O.
48
M CLOCK
P3-3/BUZR
O Input/Output
L
—
E2PROM CLOCK terminal.
49
BEEP
P4-0
O Input/Output
—
—
BEEP (when TC : 1.6 kHz, when CF : 3.0 kHz).
50
MOTOR CTL
P4-1
O Input/Output
L
H
MOTOR control terminal.
51
MOTOR DIR
P4-1
O Input/Output
L
H
MOTOR control terminal.
52
MOTOR BRK
P4-2
O Input/Output
L
H
MOTOR control terminal.
53
REC CTL
P4-3
O Input/Output
L
H
REC circuit control output.
54
RADIO CTL
P5-0
O Input/Output
H
L
RADIO system control terminal (when RADIO ON = L).
55
AVLS CTL
P5-1
O Input/Output
L
L
Terminal for controlling AVLS (when ON = L).
56
AMP CTL
P5-2
O Input/Output
L
H
AMP control output (when AMP ON = H).
57
GRV/MB CTL
P5-3
O Input/Output
L
H
Tone control terminal (when GRV = L, when MB = H).
58
PM CTL
P6-0
O
Ternary output
L
H
PL control terminal.
59
PRE AMP CTL
P6-1
O
Ternary output Hi-imp Hi-imp TC/CF select output (when PRE OFF = H, when PRE ON = Hi-imp).
60
DOLBY CTL
P6-2
O
Ternary output Hi-imp Hi-imp
61
DDC2 CTL
P6-3
O
Ternary output Hi-imp Hi-imp DDC control terminal (ON at Hi-imp, OFF at L).
62
MONO/ST
MUTE
O
63
TEST
64
IF IN
65
LOCAL/DX
DO1/OT
66
DO
DO2
67
HOLD
HOLD
HOLD OFF Q21 S703 (HOLDER)
(VCC) AD REF
38
47
48 46
45
61 44 27
DDC1 CTL
39
HOLD SW
WAKE UP
HOLD SENS
37 41 35
HOLDER SW
67
DDC2 CTL
KEY IN
PW CTL
26 43 58
R DATA OUT
R DATA IN
PRE AMP CTL
BEEP
MUTE
AMP CTL
AVLS CTL
AMS CTL
MB/GRV CTL
AMS IN
BST CTL
F/R CTL
DOLBY CTL
RADIO CTL
34
LED CTL
51
59
M CS
50
55 56 29 49
M CLOCK
52
57 40
33
M DATA I/O
74
SYSTEM CONTROL IC1
30 60 31
PHOTO CTL
75
54
PHOTO IN
MOTOR CTL
BAND AM/FM
MONO/ST
MOTOR DIR
S22
4 25
28
MOTOR BRK
S1
62
IF IN
AM IN
FM IN COM3
3
64
X OUT
1
71 32
X IN
COM1 16
70
IF REQ
68
PSC
LOCAL/DX
66
DO
36
F/R SW
65
VCC2
X701 75kHz
3 BRAKE SWITCH Q601,602
LIQID CRYSTAL DISPLAY LCD1
MOTOR SERVO IC601 PH701
START 8
4
2
EEPROM IC4
VCC1
1 D5
T3,Q9-11
BATT
DC-DC CONV.
VCC2
19 U DIR 6
• R-CH is omitted REEL CAPSTAN
• Signal Path
1 V
: FM
3 W
: AM
RV601 IN 10
Q704
IC701
TAPE SPEED
2
VCC1
2
DDC 5 CONT 1
: PB
—9—
REG 3 IC5
— 10 —
RECHRGEABLE BATTERY (NICKEL-CADMIUM) NC-6WM IP1.2V
Terminal for controlling DOLBY circuit (when OFF = H, when ON = Hi-imp).
L
—
TUNER MONO/STEREO select terminal (MONO at H).
TEST
—
—
TEST terminal (Normal operation at L or NC).
IF IN
—
—
IF input.
O
I
Output
Output
External interrupt
L
—
TUNER sensitivity select terminal (LOCAL at H, DX at L).
—
—
Phase comparator output.
H
—
External interrupt terminal.
68
PSC
PSC
—
H
Pre-scaler output (FM at H).
69
GND
GND
—
—
Power supply GND terminal.
— 11 —
Open
— 12 —
Remarks
MEMO
• IC BLOCK DIAGRAMS IC3 TA7371AF-EL (TUNER SECTION)
IC301 TA2072AF (AUDIO SECTION)
IC7 TA-2022AFN-EL (TUNER SECTION)
IC601 MM1279XVBE (AUDIO SECTION)
— 27 —
— 28 —
SECTION 7 EXPLODED VIEWS NOTE: • -XX, -X mean standardized parts, so they may have some differences from the original one. • Items marked “*” are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items.
• • •
The mechanical parts with no reference number in the exploded views are not supplied. Hardware (#mark) list is given in the last of this parts list. Color Indication of Appearance Parts Example: KNOB, BALANCE (WHITE) . . . (RED) ↑ ↑ Parts of Color Cabinet’s Color
•
Abbreviation 5E : Central and South America model 9E : E model without the indication of the country of origin. AUS : Australian model CH : Chinese model
CND : Canadian model EA : Saudi Arabia model FR : French model HK : Hong Kong model IT : Italian model KR : Korean model
7-1. CABINET SECTION 4 10
6
7 5 3 10
1
2
1
not supplied
11
1 Ref. No. 1 1 2 2 2
2 3 3 3
Part No.
Description
Remarks
Ref. No.
Part No.
Description ORNAMENT, REEL(FX661/FX663) ORNAMENT, REEL(FX665) KNOB (HOLD)(FX661/FX663) KNOB (HOLD)(FX665) DETENT, CASSETTE
Remarks
3-704-197-42 LOCK, SERRAT IB (M1.4 × 2.2)(BLACK) (FX661/FX663) 3-010-838-24 LOCK, SERRAT IB (M1.4 × 2.2)(SILVER) (FX661/FX665) X-3375-427-1 CASE (FX661B) ASSY (BLACK) (FX661/FX663:AEP,IT,FR,9E) X-3375-428-1 CASE (FX661S) ASSY (SILVER) (FX661/FX663:E,CH,CND,EA,KR,HK) X-3375-431-1 CASE (FX665CE) ASSY (SILVER) (FX665:AEP,IT,UK,FR,9E)
4 4 5 5 6
3-009-676-01 3-009-676-11 3-930-794-11 3-930-794-21 3-928-465-01
7 10
X-3375-432-1 CASE (FX665) ASSY (SILVER) (FX665:CH,E,EA,HK,KR,5E,AUS) X-3373-575-1 LID (FX-S) ASSY, CASSETTE (SILVER) (FX661) X-3374-617-1 LID ASSY (H), CASSETTE (SILVER) (FX665) X-3375-484-1 LID (FX663) ASSY, CASSETTE (BLACK) (FX661/FX663)
11
3-009-677-11 KNOB (OPEN) 3-704-197-11 LOCK, SERRAT IB (M1.4 × 2)(SILVER) (FX661/FX665) 3-704-197-13 LOCK, SERRAT IB (M1.4 × 2)(BLACK) (FX661/FX663) 3-704-197-31 LOCK, SERRAT IB (M1.4 × 3)(SILVER) (FX661/FX665) 3-704-197-32 LOCK, SERRAT IB (M1.4 × 3)(BLACK) (FX661/FX663)
10
11
— 29 —
7-2. AUDIO, TUNER BOARD SECTION 55 69 65 69
66
S901
67 58 68 51
69 54 60
MT-WMEX550-125
59
53
61
56 63
62 70
64
52
57 56
56 51 Ref. No.
Part No.
Description
51 52 53 53 54
3-375-114-41 A-3021-086-A A-3061-729-A A-3061-731-A 3-007-282-01
SCREW (M1.7 × 3) TUNER BOARD, COMPLETE AUDIO BOARD, COMPLETE (FRENCH) AUDIO BOARD, COMPLETE (EXCEPT FRENCH) TERMINAL BOARD (MINUS),BATTERY
55
56 57 58
3-012-423-01 COVER (GX), MD (FX663:CND,CH,E,EA,HK,KR,9E/ FX665:CH,E,EA,HK,KR,5E,9E,AUS) 3-012-423-11 COVER (GX), MD (FX661/FX663:AEP,IT,FR/FX665:AEP,IT,UK,FR) 3-355-424-61 SCREW, TAPPING 3-704-197-71 LOCK, SERRAT IB (M1.4 × 4.5) X-3374-438-1 BRACKET ASSY
59 60
3-009-667-01 SPRING, TENSION 3-937-993-41 LID, BATTERY CASE (BLACK)(FX661,FX663)
55
Remarks
Ref. No.
Part No.
Description
60 60 61 62 63
3-937-993-61 3-937-993-71 X-3373-190-1 3-009-690-01 3-010-520-01
LID, BATTERY CASE (SILVER)(FX665) LID, BATTERY CASE (SILVER)(FX661) TERMINAL BOARD ASSY, BATTERY TERMINAL BOARD, BATTERY COVER, SW
64 65 66 67 67
3-012-434-11 3-009-668-01 3-010-173-01 X-3374-205-1 X-3374-439-1
GUIDE (TU) PLATE, C LOCK BRACKET (B) HOLDER ASSY, CASSETTE (HK) HOLDER ASSY, CASSETTE (EXCEPT HK)
68 69 70 S901
3-569-706-01 3-704-197-01 3-015-972-01 1-762-793-11
SPACER, CASSETTE LID SCREW (IB LOCK) (1.4 × 1.6) SHEET (TERMINAL BOARD) SWITCH, LEAF
— 30 —
Remarks
7-3. MECHANISM SECTION (MT-WMEX550-125)
132 110
PM901
134
115
116 114 117 119
125 109
111
134
124
133
120
106 108 123 105 122 130
126
131
M901
128
104
129 128
107 102
121
130 HP301
103
127 not supplied
101
Ref. No.
Part No.
Description
101 102 103 104 105
3-011-277-01 3-019-716-01 X-3372-850-1 3-007-434-01 3-007-428-01
COVER (B) (Y), MD SCREW (M1.4), P LOCK ACE PINCH LEVER (N) ASSY PULLEY (REVERSE) WASHER (R)
106 107 108 109 110
X-3374-750-1 3-007-439-01 3-386-694-21 X-3374-751-1 3-007-430-01
FLYWHEEL (R) ASSY SLIDER (LOCK) WASHER FLYWHEEL (N) ASSY BELT
111 114 115 116 117
3-007-960-01 3-007-436-01 X-3372-848-1 3-007-435-01 X-3372-853-1
SPRING (EJECT) (Y), TORSION SPRING (TRIGGER), TORSION CLUTCH ASSY (M) GEAR (FR) LEVER (FRG) ASSY
119 120
3-007-432-01 SHEET (R), REFLECTION 3-007-427-01 SCREW (IB LOCK)
Remarks
Ref. No.
Part No.
Description
121 122 123 124 125
X-3374-440-1 3-007-455-01 3-007-458-01 3-007-456-01 3-007-454-01
CHASSIS ASSY (J2) SPRING (R), TORSION SPRING (H/B), TENSION SPRING (N), TORSION SPRING (FR), TORSION
126 127 128 129 130
3-007-457-01 X-3372-849-1 3-010-954-01 3-918-943-01 3-366-017-01
SPRING (TEN), TENSION PINCH LEVER (R) ASSY SPRING (BT), COMPRESSION WASHER, STOPPER BUSHING (CAPSTAN)
131 132 * 133 134 HP301
3-007-429-01 3-932-724-21 3-010-272-01 3-010-274-02 1-500-536-11
WASHER (R), STOPPER WASHER BELT, RETAINER TABLE, REEL HEAD, MAGNETIC (PLAYBACK)
PM901 M901
— 31 —
1-454-674-31 SOLENOID, PLUNGER 1-698-885-21 MOTOR (REEL/CAPSTAN)
Remarks
SECTION 8 ELECTRICAL PARTS LIST
TUNER NOTE: When indicating parts by reference number, please include the board naame. The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified. Les composants identifiés par une marque ! sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié.
•
• •
• Ref. No.
Part No.
Due to standardization, replacements in the parts list may be different from the parts specified in the diagrams or the components used on the set. -XX, -X mean standardized parts, so they may have some difference from the original one. Items marked “*” are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. CAPACITORS: uF: µF
Description
Remarks
A-3021-086-A TUNER BOARD, COMPLETE ********************** < CAPACITOR > C1 C2 C3 C4 C5
1-164-360-11 1-164-360-11 1-164-360-11 1-115-156-11 1-162-919-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.1uF 0.1uF 0.1uF 1uF 22PF
5%
16V 16V 16V 10V 50V
C6 C7 C8 C9 C10
1-162-917-11 1-162-917-11 1-162-970-11 1-162-964-11 1-162-966-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
15PF 15PF 0.01uF 0.001uF 0.0022uF
5% 5% 10% 10% 10%
50V 50V 25V 50V 50V
C11 C12 C13 C14 C15
1-164-676-11 1-162-928-11 1-162-923-11 1-162-970-11 1-162-910-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
2200PF 120PF 47PF 0.01uF 5PF
5% 5% 5% 10% 0.25PF
16V 50V 50V 25V 50V
C16 C17 C18 C19 C20
1-162-905-11 1-162-970-11 1-104-847-11 1-162-905-11 1-162-966-11
CERAMIC CHIP CERAMIC CHIP TANTAL. CHIP CERAMIC CHIP CERAMIC CHIP
1PF 0.01uF 22uF 1PF 0.0022uF
0.25PF 10% 20% 0.25PF 10%
50V 25V 4V 50V 50V
C21 C22 C23 C24 C25
1-164-676-11 1-162-926-11 1-162-928-11 1-165-176-11 1-165-176-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
2200PF 82PF 120PF 0.047uF 0.047uF
5% 5% 5% 10% 10%
16V 50V 50V 16V 16V
C26 C27 C28 C29 C30
1-162-923-11 1-162-935-11 1-164-227-11 1-162-970-11 1-164-227-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
47PF 4PF 0.022uF 0.01uF 0.022uF
5% 0.25PF 10% 10% 10%
50V 50V 25V 25V 25V
C31 C32 C33 C34 C35
1-164-315-11 1-162-918-11 1-162-970-11 1-104-847-11 1-164-227-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP TANTAL. CHIP CERAMIC CHIP
470PF 18PF 0.01uF 22uF 0.022uF
5% 5% 10% 20% 10%
50V 50V 25V 4V 25V
C36 C37 C38 C39 C40
1-162-923-11 1-115-156-11 1-164-227-11 1-135-151-21 1-115-156-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP TANTALUM CHIP CERAMIC CHIP
47PF 1uF 0.022uF 4.7uF 1uF
5%
50V 10V 25V 4V 10V
C41 C42 C43 C44 C45
1-165-176-11 1-164-362-11 1-104-908-11 1-164-227-11 1-162-970-11
CERAMIC CHIP CERAMIC CHIP TANTAL. CHIP CERAMIC CHIP CERAMIC CHIP
0.047uF 470PF 47uF 0.022uF 0.01uF
10% 5% 20% 10% 10%
10% 20%
Ref. No.
•
• •
RESISTORS All resistors are in ohms. METAL: metal-film resistor METAL OXIDE: Metal Oxide-film resistor F: nonflammable COILS uH: µH SEMICONDUCTORS In each case, u: µ, for example: uA...: µA... , uPA... , µPA... , uPB... , µPB... , uPC... , µPC... , uPD..., µPD...
Part No.
Description
C46 C47 C48 C49 C50
1-162-965-11 1-164-227-11 1-115-156-11 1-115-156-11 1-164-227-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.0015uF 10% 0.022uF 10% 1uF 1uF 0.022uF 10%
Remarks 50V 25V 10V 10V 25V
C52 C53 C54 C55 C56
1-163-139-00 1-107-826-11 1-104-912-11 1-104-912-11 1-162-970-11
CERAMIC CHIP CERAMIC CHIP TANTAL. CHIP TANTAL. CHIP CERAMIC CHIP
820PF 0.1uF 3.3uF 3.3uF 0.01uF
5% 10% 20% 20% 10%
50V 16V 6.3V 6.3V 25V
C57 C58 C59 C60 C61
1-164-345-11 1-115-156-11 1-165-176-11 1-164-227-11 1-104-847-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP TANTAL. CHIP
0.082uF 1uF 0.047uF 0.022uF 22uF
10%
25V 10V 16V 25V 4V
C62 C63 C64 C65 C66
1-164-227-11 1-162-968-11 1-115-156-11 1-162-968-11 1-164-227-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.022uF 0.0047uF 1uF 0.0047uF 0.022uF
10% 10% 10% 10%
25V 50V 10V 50V 25V
C67 C68 C69 C70 C71
1-135-091-00 1-162-964-11 1-162-964-11 1-162-964-11 1-162-962-11
TANTALUM CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
1uF 0.001uF 0.001uF 0.001uF 470PF
20% 10% 10% 10% 10%
16V 50V 50V 50V 50V
C72 C73 C74 C75 C76
1-110-501-11 1-162-964-11 1-164-360-11 1-164-360-11 1-162-927-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.33uF 0.001uF 0.1uF 0.1uF 100PF
10% 10%
16V 50V 16V 16V 50V
C77 C78 C79 C81 C86
1-162-970-11 1-162-923-11 1-162-915-11 1-164-360-11 1-164-315-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.01uF 47PF 10PF 0.1uF 470PF
10% 5% 0.5PF 5%
25V 50V 50V 16V 50V
C87 C88
1-162-928-11 CERAMIC CHIP 1-162-927-11 CERAMIC CHIP
120PF 100PF
5% 5%
50V 50V
10% 10% 20%
5%
< FILTER > CF1 CF2 CF3 CF4
1-767-313-11 1-767-313-11 1-767-480-11 1-767-357-11
FILTER, CERAMIC 10.7MHz FILTER, CERAMIC 10.7MHz FILTER, CERAMIC (AM) 450KHz FILTER, CERAMIC 10.7MHz < CONNECTOR >
16V 50V 2.5V 25V 25V
CN1
1-694-248-11 CONDUCTIVE BOARD, CONNECTION < TRIMMER >
CT1
— 32 —
1-141-327-11 CAP, CHIP TYPE TRIMMER 10PF
Ver 1.1 2002.01
TUNER Ref. No.
Part No.
Description
Remarks
Ref. No.
Part No.
< DIODE >
Description
Remarks
< RESISTOR >
D1 D2 D3 D4 D5
8-719-053-30 8-719-053-30 8-719-055-61 8-719-055-61 8-719-051-01
DIODE MA2S357-(TX). SO DIODE MA2S357-(TX). SO DIODE HVR100-9TRU DIODE HVR100-9TRU LED CL-170HR-CD-T(BATT)
R1 R2 R3 R4 R5
1-216-825-11 1-216-853-11 1-216-853-11 1-216-821-11 1-216-813-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
2.2K 470K 470K 1K 220
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
D6 D7 D8 D9
8-719-420-51 8-719-404-49 8-719-420-87 8-719-049-09
DIODE DIODE DIODE DIODE
R6 R7 R8 R9 R10
1-216-829-11 1-218-870-11 1-218-836-11 1-216-833-11 1-216-813-11
METAL CHIP RES,CHIP RES,CHIP METAL CHIP METAL CHIP
4.7K 9.1K 360 10K 220
5% 0.50% 0.50% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R11 R12 R13 R14 R15
1-216-853-11 1-216-853-11 1-216-809-11 1-216-825-11 1-216-845-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
470K 470K 100 2.2K 100K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R16 R17 R18 R19 R20
1-218-907-11 1-216-833-11 1-216-821-11 1-216-821-11 1-216-833-11
RES,CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
330K 10K 1K 1K 10K
0.50% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R21 R22 R23 R24 R25
1-216-833-11 1-216-815-11 1-216-845-11 1-216-853-11 1-218-857-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP RES,CHIP
10K 330 100K 470K 2.7K
5% 5% 5% 5% 0.50%
1/16W 1/16W 1/16W 1/16W 1/16W
R26 R27 R28 R29 R30
1-218-903-11 1-216-825-11 1-216-815-11 1-218-845-11 1-218-847-11
RES,CHIP METAL CHIP METAL CHIP RES,CHIP RES,CHIP
220K 2.2K 330 820 1K
0.50% 5% 5% 0.50% 0.50%
1/16W 1/16W 1/16W 1/16W 1/16W
R31 R32 R33 R34 R35
1-218-849-11 1-218-851-11 1-218-863-11 1-218-859-11 1-218-864-11
RES,CHIP RES,CHIP RES,CHIP RES,CHIP RES,CHIP
1.2K 1.5K 4.7K 3.3K 5.1K
0.50% 0.50% 0.50% 0.50% 0.50%
1/16W 1/16W 1/16W 1/16W 1/16W
R36 R37 R38 R39 R40
1-218-868-11 1-218-871-11 1-218-879-11 1-216-823-11 1-216-829-11
RES,CHIP RES,CHIP RES,CHIP METAL CHIP METAL CHIP
7.5K 10K 22K 1.5K 4.7K
0.50% 0.50% 0.50% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R41 R42 R43 R44 R45
1-216-845-11 1-216-820-11 1-216-833-11 1-216-819-11 1-216-825-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
100K 820 10K 680 2.2K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R46 R47 R48 R49 R50
1-216-799-11 1-216-817-11 1-216-829-11 1-216-845-11 1-216-833-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
15 470 4.7K 100K 10K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R51 R52 R53 R54 R55
1-216-829-11 1-216-841-11 1-216-817-11 1-216-829-11 1-216-831-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
4.7K 47K 470 4.7K 6.8K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R56 R57 R58 R59 R60
1-216-831-11 1-216-826-11 1-216-845-11 1-216-831-11 1-216-831-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
6.8K 2.7K 100K 6.8K 6.8K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
MA729 MA111 MA8130 1SS367-T3SONY
< IC > IC1 IC2 IC3 IC4 IC4
8-759-535-53 8-759-545-88 8-759-362-23 8-759-527-64 8-759-527-65
IC IC IC IC IC
TC9326F-051 TD6134AF(ER) TA7371AF-EL AK93C45-SFU (CND) AK93C45-SFE (EXCEPT CND, AEP, UK, AUS, IT, FR, EA)
IC4
8-759-527-66 IC AK93C45-SFEH
IC5 IC6 IC7
(AEP, UK, AUS, IT, FR, EA) 8-759-457-70 IC XC62RP1602MR 8-759-387-31 IC TC75S55F(TE85R) 8-759-362-25 IC TA-2022AFN-EL < JUMPER >
JC1
1-216-864-11 METAL CHIP
0
5%
< COIL > L2 L3 L4 L5 L6
1-416-180-11 1-416-181-11 1-501-812-11 1-412-010-41 1-412-010-41
COIL (WITH CORE) (FM OSC) COIL (WITH CORE) (FM MIX) ANTENNA, FERRITE-ROD (MW) INDUCTOR CHIP 22uH INDUCTOR CHIP 22uH
L7 L8 L9 L10
1-412-010-41 1-412-010-41 1-412-010-41 1-412-010-41
INDUCTOR CHIP INDUCTOR CHIP INDUCTOR CHIP INDUCTOR CHIP
22uH 22uH 22uH 22uH
< LIQUID CRYSTAL DISPLAY > LCD1
1-801-656-11 DISPLAY PANEL, LIQUID CRYSTAL
1/16W
< TRANSISTOR > Q1 Q2 Q3 Q4 Q5
8-729-037-89 8-729-028-69 8-729-037-89 8-729-037-89 8-729-823-86
TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR
2SC4627J-C(TX).SO 2SC4655-BC(TX) 2SC4627J-C(TX).SO 2SC4627J-C(TX).SO 2SA1745
Q6 Q7 Q8 Q9 Q10
8-729-028-69 8-729-037-64 8-729-037-63 8-729-800-71 8-729-800-71
TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR
2SC4655-BC(TX) UN9116J-(TX).SO UN9115J-(TX).SO 2SB815B7-TB 2SB815B7-TB
Q11 Q12 Q13 Q14 Q15
8-729-420-68 8-729-800-37 8-729-028-69 8-729-037-71 8-729-037-63
TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR
2SD1328-R-TX 2SD1048-X7 2SC4655-BC(TX) UN9210J-(TX).SO UN9115J-(TX).SO
Q16 Q17 Q18 Q21
8-729-028-69 8-729-028-69 8-729-800-71 8-729-037-63
TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR
2SC4655-BC(TX) 2SC4655-BC(TX) 2SB815B7-TB UN9115J-(TX).SO
— 33 —
TUNER Ref. No.
AUDIO
Part No.
Description
Part No.
Description
R61 R62 R63 R64 R65
1-216-833-11 1-216-841-11 1-216-833-11 1-216-829-11 1-216-849-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
10K 47K 10K 4.7K 220K
5% 5% 5% 5% 5%
Remarks 1/16W 1/16W 1/16W 1/16W 1/16W
C111 C112 C113 C114 C115
1-107-823-11 1-115-156-11 1-115-156-11 1-162-964-11 1-162-970-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.47uF 1uF 1uF 0.001uF 0.01uF
10%
R66 R67 R68 R69 R70
1-216-849-11 1-216-853-11 1-216-857-11 1-216-853-11 1-216-849-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
220K 470K 1M 470K 220K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
C116 C117 C119 C201 C202
1-109-982-11 1-115-156-11 1-115-156-11 1-162-963-11 1-162-963-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
1uF 1uF 1uF 680PF 680PF
10%
R71 R72 R73 R75 R76
1-216-821-11 1-216-845-11 1-216-849-11 1-216-845-11 1-216-835-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
1K 100K 220K 100K 15K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
C203 C204 C205 C206 C207
1-135-151-21 1-164-227-11 1-164-677-11 1-115-156-11 1-162-965-11
TANTALUM CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
4.7uF 0.022uF 0.033uF 1uF 0.0015uF
20% 10% 10%
R77 R78 R79 R80 R82
1-216-819-11 1-216-821-11 1-216-821-11 1-216-821-11 1-216-805-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
680 1K 1K 1K 47
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
C208 C209 C210 C211 C212
1-135-180-21 1-164-174-11 1-162-970-11 1-107-823-11 1-115-156-11
TANTALUM CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
3.3uF 0.0082uF 0.01uF 0.47uF 1uF
20% 10% 10% 10%
< SWITCH >
C213 C214 C215 C216 C217
1-115-156-11 1-162-964-11 1-162-970-11 1-115-156-11 1-115-156-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
1uF 0.001uF 0.01uF 1uF 1uF
< VARIABLE RESISTOR > RV1
1-223-578-11 RES, ADJ, METAL GLAZE 22K
Ref. No.
Remarks
10% 10%
10% 10%
10%
10% 10%
16V 10V 10V 50V 25V 10V 10V 10V 50V 50V 4V 25V 16V 10V 50V 6.3V 25V 25V 16V 10V 10V 50V 25V 10V 10V
S1 S2 S3 S4 S5
1-692-453-11 1-692-453-11 1-692-453-11 1-692-453-11 1-692-453-11
SWITCH, KEY BOARD (RADIO OFF) SWITCH, KEY BOARD (REPEAT) SWITCH, KEY BOARD (FF) SWITCH, KEY BOARD (REW) SWITCH, KEY BOARD (BAND)
C219 C301 C302 C303 C304
1-115-156-11 1-135-316-11 1-115-467-11 1-109-982-11 1-135-151-21
CERAMIC CHIP TANTAL. CHIP CERAMIC CHIP CERAMIC CHIP TANTALUM CHIP
1uF 22uF 0.22uF 1uF 4.7uF
S7 S8 S9 S10 S11
1-771-053-21 1-771-053-21 1-692-453-11 1-692-453-11 1-692-453-11
SWITCH, KEY BOARD (MENU) SWITCH, KEY BOARD (SET) SWITCH, KEY BOARD (TUNING +) SWITCH, KEY BOARD (TUNING -) SWITCH, KEY BOARD (ENTER)
C305 C306 C307 C308 C309
1-135-316-11 1-135-149-21 1-164-227-11 1-135-180-21 1-115-156-11
TANTAL. CHIP TANTALUM CHIP CERAMIC CHIP TANTALUM CHIP CERAMIC CHIP
22uF 2.2uF 0.022uF 3.3uF 1uF
20% 20% 10% 20%
2.5V 10V 25V 6.3V 10V
< TRANSFORMER >
C310 C311 C312 C313 C314
1-135-151-21 1-165-128-11 1-135-151-21 1-135-201-11 1-107-823-11
TANTALUM CHIP CERAMIC CHIP TANTALUM CHIP TANTALUM CHIP CERAMIC CHIP
4.7uF 0.22uF 4.7uF 10uF 0.47uF
20% 20% 20% 10%
4V 16V 4V 4V 16V
C315 C316 C317 C318 C319
1-115-156-11 1-115-156-11 1-115-467-11 1-135-149-21 1-107-688-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP TANTALUM CHIP TANTAL. CHIP
1uF 1uF 0.22uF 2.2uF 1.5uF
10% 20% 20%
10V 10V 10V 10V 10V
C320 C321 C322 C601 C602
1-162-964-11 1-162-964-11 1-162-964-11 1-162-970-11 1-162-970-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.001uF 0.001uF 0.001uF 0.01uF 0.01uF
10% 10% 10% 10% 10%
50V 50V 50V 25V 25V
C603 C604 C605 C606 C607
1-162-970-11 1-107-826-11 1-164-156-11 1-115-467-11 1-107-826-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.01uF 0.1uF 0.1uF 0.22uF 0.1uF
10% 10%
25V 16V 25V 10V 16V
C608 C701 C702 C703
1-109-982-11 1-135-151-21 1-115-156-11 1-162-964-11
CERAMIC CHIP TANTALUM CHIP CERAMIC CHIP CERAMIC CHIP
1uF 4.7uF 1uF 0.001uF
10% 20%
T1 T2 T3
1-416-182-11 COIL (AM OSC) 1-416-183-11 COIL (AM MIX) 1-423-745-11 TRANSFORMER, DC-DC CONVERTER < VIBRATOR >
X1 1-579-615-11 VIBRATOR, CRYSTAL 75KHz ************************************************************ A-3061-729-A AUDIO BOARD, COMPLETE (FRENCH) ****************************** A-3061-731-A AUDIO MOUNTED BOARD, COMPLETE ****************************** (EXCEPT FRENCH)
20% 10% 10% 20%
10V 2.5V 10V 10V 4V
< CAPACITOR > C101 C102 C103 C104 C105
1-162-963-11 1-162-963-11 1-135-151-21 1-164-227-11 1-164-677-11
CERAMIC CHIP CERAMIC CHIP TANTALUM CHIP CERAMIC CHIP CERAMIC CHIP
680PF 680PF 4.7uF 0.022uF 0.033uF
C106 C107 C108 C109 C110
1-115-156-11 1-162-965-11 1-135-180-21 1-164-174-11 1-162-970-11
CERAMIC CHIP CERAMIC CHIP TANTALUM CHIP CERAMIC CHIP CERAMIC CHIP
1uF 0.0015uF 3.3uF 0.0082uF 0.01uF
10% 10% 20% 10% 10%
50V 50V 4V 25V 16V
10% 20% 10% 10%
10V 50V 6.3V 25V 25V
— 34 —
10% 10%
10%
10V 4V 10V 50V
AUDIO Ref. No.
Part No.
Description
Remarks
< CONNECTOR > CN301 CN701
1-766-336-21 CONNECTOR, FFC/FPC 6P 1-779-079-11 CONNECTOR, BOARD TO BOARD < DIODE >
D701 D702 D703 D704 D705
8-719-404-49 8-719-049-09 8-719-423-35 8-719-423-35 8-719-423-35
DIODE DIODE DIODE DIODE DIODE
MA111 1SS367-T3SONY MA8120-H MA8120-H MA8120-H
< FERRITE BEAD > FB703 FB704 FB705 FB706 FB707
1-414-385-11 1-414-385-11 1-414-235-11 1-414-235-11 1-414-235-11
INDUCTOR CHIP INDUCTOR CHIP INDUCTOR CHIP INDUCTOR CHIP INDUCTOR CHIP
0UH 0UH 0UH 0UH 0UH
Ref. No.
Part No.
Description
R112 R113 R114 R115
1-216-824-11 1-216-809-11 1-216-840-11 1-216-849-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP
Remarks
R115
1-218-347-11 RES,CHIP
91K
R151
1-216-864-11 METAL CHIP
0
R151
1-220-370-11 RES,CHIP
62
R201 R202 R203
1-216-812-11 METAL CHIP 1-216-847-11 METAL CHIP 1-216-831-11 METAL CHIP
180 150K 6.8K
R204 R205 R207 R208 R209
1-216-824-11 1-216-825-11 1-216-795-11 1-218-270-11 1-216-834-11
METAL CHIP METAL CHIP RES,CHIP RES,CHIP METAL CHIP
1.8K 2.2K 6.8 1.1K 12K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R210 R211 R212 R213 R214
1-216-852-11 1-216-822-11 1-216-824-11 1-216-809-11 1-216-840-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
390K 1.2K 1.8K 100 39K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R215
1-216-849-11 METAL CHIP
220K
5%
R215
1-218-347-11 RES,CHIP
91K
R251
1-216-864-11 METAL CHIP
0
R251
1-220-370-11 RES,CHIP
62
R301
1-218-891-11 RES,CHIP
68K
R302 R303 R304 R305 R307
1-216-839-11 1-216-825-11 1-218-295-11 1-216-821-11 1-216-847-11
METAL CHIP METAL CHIP RES,CHIP METAL CHIP METAL CHIP
33K 2.2K 43K 1K 150K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R309 R310 R604 R605 R606
1-216-826-11 1-216-793-11 1-216-817-11 1-216-830-11 1-216-809-11
METAL CHIP RES,CHIP METAL CHIP METAL CHIP METAL CHIP
2.7K 4.7 470 5.6K 100
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R607 R611 R612 R701 R702
1-216-837-11 1-216-821-11 1-216-833-11 1-216-849-11 1-216-849-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
22K 1K 10K 220K 220K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R703 R704 R705 R706 R707
1-216-845-11 1-216-821-11 1-216-821-11 1-216-843-11 1-216-843-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
100K 1K 1K 68K 68K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
220K 1M 1.5K 4.7K 220K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
1K 1K 1K
5% 5% 5%
1/16W 1/16W 1/16W
1.8K 100 39K 220K
5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W (FRENCH) 5% 1/16W (EXCEPT FRENCH) 5% 1/16W (EXCEPT FRENCH) 5% 1/16W (FRENCH) 5% 1/16W 5% 1/16W 5% 1/16W
< IC > IC301 IC601 IC701
8-759-359-76 IC TA2072AF 8-759-356-46 IC MM1279XVBE 8-759-460-25 IC S-8321AJMP-DNJ-T2 < JACK >
J701
1-778-930-21 JACK 7P (PHONE) < JUMPER >
JC802
1-216-864-11 METAL CHIP
0
5%
1/16W
< COIL > L101 L201 L301 L701
1-412-011-31 1-412-011-31 1-412-011-31 1-412-034-11
INDUCTOR CHIP INDUCTOR CHIP INDUCTOR CHIP INDUCTOR CHIP
27uH 27uH 27uH 330uH
< PHOTO INTERRUPTER > PH701
8-719-988-15 PHTO REFLECTOR PR-11-C < TRANSISTOR >
Q301 Q302 Q303 Q304 Q306
8-729-426-51 8-729-422-39 8-729-426-36 8-729-230-72 8-729-426-36
TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR
XP1210-TXE XN4404 XP1215-TXE 2SA1362YG XP1215-TXE
Q601 Q602 Q701 Q702 Q704
8-729-403-42 8-729-402-84 8-729-421-26 8-729-230-72 8-729-425-46
TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR
XN1401 XN4601 UN5216 2SA1362YG XP4315-TXE
< RESISTOR > R101 R102 R103 R104 R105
1-216-812-11 1-216-847-11 1-216-831-11 1-216-824-11 1-216-825-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
180 150K 6.8K 1.8K 2.2K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R708 R709 R710 R711 R712
1-216-849-11 1-216-857-11 1-216-823-11 1-216-829-11 1-216-849-11
R107 R108 R109 R110 R111
1-216-795-11 1-218-270-11 1-216-834-11 1-216-852-11 1-216-822-11
RES,CHIP RES,CHIP METAL CHIP METAL CHIP METAL CHIP
6.8 1.1K 12K 390K 1.2K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R713 R714 R715
1-216-821-11 METAL CHIP 1-216-821-11 METAL CHIP 1-216-821-11 METAL CHIP
— 35 —
1/16W (FRENCH) 5% 1/16W (EXCEPT FRENCH) 5% 1/16W (EXCEPT FRENCH) 5% 1/16W (FRENCH) 0.50% 1/16W
WM-FX661/FX663/FX665 AUDIO Ref. No.
Part No.
Description
Remarks
< COMPOSITION CIRCUIT BLOCK > RB301 RB601 RB602
1-233-872-21 RES, NETWORK (CHIP TYPE)(3216) 1-233-873-21 RES, NETWORK (CHIP TYPE)(3216) 1-233-576-11 RES, CHIP NETWORK 100
Ref. No.
Part No.
! !
1-528-713-11 BATTERY CHARGER (BC-7DC)(FX663:CND) 1-528-744-21 BATTERY CHARGER (BC-7DY) (FX661/FX663:AEP,IT,FR,EA/FX665:AEP,IT,FR,EA,5E) 1-528-822-11 BATTERY CHARGER (BC-7DN) (FX663:CH/FX665:CH) 1-569-007-11 ADAPTOR, CONVERSION 2P (FX663:E,9E/FX665:E,9E) 1-569-008-21 ADAPTOR, CONVERSION 2P(FX665:5E)
! !
< VARIABLE RESISTOR > ! RV301 RV601
1-225-342-11 RES, VAR, CARBON 10K/10K (VOLUME) 1-223-576-11 RES, ADJ, METAL GLAZE 2.2K
Remarks
1-759-213-11 CASE, BATTERY 3-008-521-01 CASE, BATTERY CHARGE 3-862-485-11 MANUAL, INSTRUCTION (ENGLISH/ITALIAN) (FX661:AEP) 3-862-485-21 MANUAL, INSTRUCTION (FRENCH/DUTCH) (FX661:AEP) 3-862-485-31 MANUAL, INSTRUCTION (GERMAN/SPANISH) (FX661:AEP)
< SWITCH > S701 S702 S703
Description
1-572-922-11 SWITCH, SLIDE (HOLD) 1-572-581-11 SWITCH, SLIDE 1-762-970-21 SWITCH, PUSH (1 KEY) < THERMISTOR(POSITIVE) >
THP601 1-810-794-11 THERMISTOR, POSITIVE ************************************************************ MISCELLANEOUS ************* HP301 1-500-536-11 HEAD, MAGNETIC (PLAYBACK) M901 1-698-885-21 MOTOR (REEL/CAPSTAN) PM901 1-454-674-31 SOLENOID, PLUNGER S901 1-762-793-11 SWITCH, LEAF ************************************************************ ACCESSORIES & PACKING MATERIALS *******************************
! !
! !
1-475-182-11 REMOTE CONTROL UNIT(RM-WMF655)(FX663) 1-475-182-21 REMOTE CONTROL UNIT(RM-WMF655)(FX665) 1-505-536-21 HEADPHONE(WITH REMOTE CONTROL) (FX661) 1-528-252-21 BATTERY CHARGER (BC-7S) (FX663:HK/FX665:UK) 1-528-299-41 BATTERY, NI-CD (NC-6WM)(FX663:CND) 1-528-434-11 BATTERY CHARGER (BC-7SG)(FX665:AUS) 1-528-543-11 BATTERY,NICKEL CADMIUM(NC-6WM) (FX663:CH,E,EA,HK,KR,9E/ FX665:CH,E,EA,HK,KR,5E,9E,AUS) 1-528-543-22 BATTERY,NICKEL CADMIUM(NC-6WM) (FX661/FX663:AEP,IT,FR,CH,E,EA,HK,KR,9E,FX665) 1-528-644-11 BATTERY CHARGER (BC-7DT2) (FX663:E,9E/FX665:E,9E) 1-528-661-11 BATTERY CHARGER (BC-7DR) (FX663:KR/FX665:KR)
— 36 —
3-862-485-41 MANUAL, INSTRUCTION (SWEDISH/PORTUGUESE)(FX661:AEP) 3-862-488-11 MANUAL, INSTRUCTION (ENGLISH/FRENCH) (FX661:FR/FX663:CND,AEP,IT,FR,E,EA,HK,KR/ FX665:AEP,IT,UK,FR,E,EA,HK,KR,AUS) 3-862-488-21 MANUAL, INSTRUCTION (GERMAN/ITALIAN) (FX663:AEP,IT/FX665:AEP,IT) 3-862-488-31 MANUAL, INSTRUCTION (SPANISH/PORTUGUESE) (FX663:AEP/FX665:AEP,5E) 3-862-488-41 MANUAL, INSTRUCTION (DUTCH/SWEDISH) (FX663:AEP/FX665:AEP) 3-862-488-51 MANUAL, INSTRUCTION (CHINESE/KOREAN) (FX663:E,KR/FX665:E,HK,KR) 3-862-488-61 MANUAL, INSTRUCTION (CHINESE) (FX663:CH/FX665:CH) 3-862-488-71 MANUAL, INSTRUCTION (ENGLISH/CHINESE) (FX663:9E/FX665:9E) 3-918-937-01 CASE, CARRYING 8-953-171-91 HEADPHONE MDR-ED136MP/K1 SET (FX663/FX665) The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified.
•
Les composants identifiés par une marque ! sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié.
Abbreviation 5E : Central and South America model 9E : E model without the indication of the country of origin. AUS : Australian model CH : Chinese model CND : Canadian model EA : Saudi Arabia model FR : French model HK : Hong Kong model IT : Italian model KR : Korean model
WM-FX661/FX663/FX665 Printing Method for Large Sized Documents Such As Circuit Diagrams Printing the page that exceeds A4-size two pages (or letter size) is possible by specifying the print range. (Acrobat Reader Version 4.0 or later) 1. The enlarged print is made, if a smaller range than A4 size is specified and the A4 size is selected as a print paper. 2. Almost real sized print is made, if the range is specified, meeting the print paper size. 3. The reduced print is made, if a larger range than the print paper size is specified. Printing by Specifying a Range In printing out the drawings such as a schematic diagram and a printed wiring board larger than the printed paper size, they can be printed by specifying the range. (Acrobat Reader Version 4.0 or later) 1. Display the page to be printed. 2. From the File menu, select [Page Setup] and set the paper size. 3. From the Command bar, select [Graphic Select Tool]. (Keep pressing T , select
)
4. Dragging the cursor, enclose the range on the page to be printed. 5. From the File menu, select [Print] and make sure that the [Selected Graphic] is already checked. Also, if [Fit to page] is checked, the selected range is enlarged or reduced (and rotated as necessary) meeting the paper size.
@
!
6. To cancel the printed range, click an arbitrary position on the screen.
WM-FX661/FX663/FX665
REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page. Ver.
Date
Description of Revision
1.0
1998.05
New
1.1
2002.01
Correction of Part No. for IC 4
(SPM-01041)
