Transcript
WMA 505® Fixed outdoor tracking device for monitoring goods and shipments, with GPS coordinate detection ability, for long term and continuous outdoor usage The WMA 505® is a special goods and package tracking device with inbuilt GPS transmitter. Due to its low energy consumption in stand-by mode and wheather proof design – it is ideal for continuous outdoor usage with tracking transported goods, containers and packages, for determining their current position on the map, or for initiating potential emergency calls. The WMA 505® can be used for logistic applications to track important shipments, cargo trucks, containers, transport services. Thus you can be always informed about your shipments’ current position, movement. The GPS coordinates are monitored in real time: periodically acquired by the device and sent to the provider’s server or the EMR Tracking® surveillance center. The data will be sent on GPRS network by one of the world’s most reliable, high sensitivity and high precision uBlox® GPS transmitter integrated GPRS module and the special internal antenna unit. The device will surely send its GPS positions with the best possible signal strength. The device can be mounted and fixed to the shipment in a very easy way. It has a small design while it’s presence is almost unperceived. The WMA 505® can operate with the inserted battery for a very long time (up to 3 years without battery exchange) and does not need to be recharged.
FIELDS OF APPLICATION • For commercial businesses and for logistic use • For tracking goods, packages, shipment, cargo trucks, containers • For tracking tangible goods, valuable goods and equipment • For determining the position of utility work machinery • Monitoring movement for safety & security purposes • For locating lost vehicles or using for anti-theft purposes
WMA 505® technical features
TECHNICAL FEATURES • • • •
• • • •
• • •
• • • • • •
• • • •
Built-in reliable GPS receiver (u-blox® chipset) with superior sensitivity and fast time to first fix Real time vehicle GPS positioning and accurate status monitoring Sends the current GPS coordinates and status information at the configured intervals to a defined central server The sent positions, route can be seen, the movement, the actual position can be tracked and monitored through the incoming data Built-in gyroscope for sensing acceleration The device can communicate worldwide on available GPRS networks by the quad-band module Easy to install, easy to configure Settings can be customized by the application (tracking, surveillance, guarding, leaving/step into geo-fence zone, etc.) Water resistant design Endurances wide temperature levels between -20 and +60 degrees of Celsius Low power consumption, long standby operation provided by the special dual internal battery solution and the sophisticated power management algorithms: 1000 days Internal dedicated GSM, GPS antenna 3 status LED for indicating the current operation Map view and tracking and server software access - optional Geo-fence alarm features (leaving the zone/arrive into the zone) Several alarm and notification possibility Sending IP reports between 5 minute and 24 hours frequency (fix time intervals, scheduled report or in case of event) The alarms will be forwarded to the server, the data can be seen on the EMR Tracking® user interface Configuration with the configuration software or SMS commands, the settings can be stored Small design, easy to fix and install to location points FCC certification
GSM/GPRS FEATURES
•
GPRS module: • Integrated u-blox® GSM/ GPRS module • 4-bands: 850/900/1800/1900 MHz • GPRS multi-slot class 10 • GPRS mobil base station class B • GSM phase 2/2+ certification
• •
• •
• Class 4 (2W @ 850/900 MHz) • Class 1 (1W @ 1800/1900 MHz) RMS phase error: 5 degrees Max RF power out • GSM850/GSM900: 33.0±2 dBm • DCS/PCS: 30.0±2 dBm • Dynamic Input Range: -15 ~ -108 dBm • Receiver Sensitivity Class II RBER 2% (-107 dBm) Stability of Frequency < 2.5 ppm Max Frequency Error ±0.1 ppm
GPS FEATURES
• •
• •
•
GPS chip: u-blox® GPS receiver Sensitivity: • Autonomous: -148 dBm • Hot start: -160 dBm • Tracking: -162 dBm Position Accuracy: • Autonomous: < 2.5m • SBAS: 2.0m TTFF (open sky, AGPS): • Cold start: 30s average • Warm start: < 30s • Hot start: < 1s Built-in 3-axis accelerometer for power conservation and 3D motion detection, acceleration detection
INTERFACES
•
MECHANICAL CONSTRUCTION
• • • •
•
Dimensions: 118 x 69.5 x 26.8 mm Weight: 105 gr (without batteries) Water resistance: IPX7 protection Operating Temperature : • During operation: between -20 and +60 Celsius degree • Storage: between -30 and +70 Celsius degree (without battery) Fixation: with 4 screws
ALARMS AND EVENTS
• • • •
UDP data transmit protocol SMS commands Scheduled Timing Report (IP) Report position and status at preset intervals: • Low Battery Power Alarm • Motion Alarm (Alarms based on the sensing events of 3D Accelerometer) • Geo-fence (zone leave/incoming) alarm and parking alarm (support up to 5 internal geo-fence zones)
This product assigned with CE symbol according to the Europe an regulations. The product fits to R&TTE 99/5/CE, FCC standards and requirements, directives.
Serial port - Internal 8 pin connector for upgrading or debugging
LED SIGNALS • • •
GSM network GPS Battery status
POWER LEVEL, CURRENT
• • •
•
Internal battery: 2x CR123A lithium batteries 1500mAh Standby current: < 10 uA Reporting modes and battery lifecycle: • SMS reporting standby (optional): • 1 SMS report per day: 1000 days* • SMS message count: 1000 • IP reporting standby: • One report per day: 950 days* • Four reports per day: 248 days* • Five minutes reporting: 4 days * Operation modes: • Power save mode, for long standby time • Continuous mode, for emergency tracking
*Consider that the battery operation cycle was calculated and are valid for ideal situations only. The real battery life depends on the circumstances (temperature, humidity, GSM coverage and signal strength, GPS satellite visibility clearance, battery capacity and the configured data sending periods, etc.)
The images on the data sheet are for illustration purposes only. WM Systems LLC. cannot be held liable for erroneous information on the data sheet. The announced data are subject to change without notice. The details on the data sheet are for general information purposes only. For more specific details, please contact our colleagues.
WM Systems LLC. tel.: +36 1 310 7075, fax.: +36 1 319 8249, www.m2mserver.com
