Transcript
Wood-burning stoves Sauna Accessorie SaunaStones
2
About us
About us
3
FinTec-sauna stoves High functionality and quality at an affordable price. FinTec is one of the leading German suppliers of premium sauna stoves, Finnish Sauna Stones and high quality accessories. With FinTec wood-burning stoves or electrical heaters you do not enter any experiments. It is our goal to establish a distinction from the competitors by creating an additional benefit for our customers. It is our standard to exceed the pure fulfilment of our customers’ requirements. Our sauna stoves as well as our SaunaStones are vitally important for the quality of a good sauna installation. With our high demand on quality we achieve economical success for speciality retailers, builders of sauna installations and last but not least for the bather. Our sauna stoves are mainly produced in Germany. Thanks to the high level of automation it is possible to offer high quality sauna stoves at an affordable price. It does not matter if you favour a wood-burning stove or an electrical heater: A FinTec product is always the right decision!
Wood-burning stove premium line
4
Low demand on fire wood 2,7 kg per hour
Already complies with the 2nd Grade of the 1. BImSchV
high efficiency 78.1 %
high heat output capacity 14.6 kW
Wood-burning stove premium line
5
Advance by innovation Other people talk about innovations – we develop them as far as to start their production! This is why our new wood-burning stove has an effective exhaust gas conduct and a huge heat exchanging device for a high efficiency. As probably the first sauna stove on the market our top model has an incoming air control that regulates the incoming air from the beginning of the burning on completely automatically. This regulation results to a considerably improved burning behaviour compared to other stoves. All these innovations are reflected positively in the efficiency, the demand on firewood and of course the emissions. The main reason for this complex technique is the introduction of the first Federal Emission Control Law (1.BImSchV) on February 1st, 2010. This law controls the limits for carbon monoxide (CO), dust as well as the minimum efficiency. Sauna stoves that do not comply with these requirements will not be authorised by chimney sweepers in Germany.
All highlights in an overview Diameter of the smoke pipe – for an easy installation without adapter
Stone volume of 180 kg for an perfect sauna steam
Can be installed directly on burnable floors
Self closing door
Unhealthy high temperature (800 °C) coating
Automatic air inlet for an efficient and economical use
Heat-resistant ceramic glass, 4 mm thickness
Door with door lock for a safe use
Wood-burning stove premium line
6
High quality for a lot of fun With our high quality wood-burning stoves you do not have to accept a compromise or experiments. All FinTec wood-burning stoves comply with the regulations of EN 15821. This has been proved by an authorized test laboratory during the approval test. Moreover, the most of the wood-burning stoves comply with the strict regulations of the first Federal Emission Control Law (1. BImSchV). In Germany multiple lightened sauna stoves do not need an approval anymore if they comply with the first Federal Emission Control Law (1. BImSchV) and soon with the EN 15821. Before you install your stove you have to register it at your chimney sweeper together with the documents delivered. In the following years your chimney sweeper will check your stove annually and clean the chimney of your sauna stove. A measuring of the exhausts will not be needed.
Designed for life Our FinTec wood-burning stove was designed and developed in Germany and is also produced here. It is the first model of a new generation of sauna stoves that will be enlarged step by step in the next years. If you are on the search of a sauna stove that offers a pleasant appearance and unique comfort in handling in addition to German quality, you won’t be able to pass this stove.
Unproblematic installation The stove may be put directly onto inflammable material (e.g. wooden floor) without additional isolation sheets. This is an enormous advantage compared to other sauna stoves which have to be installed onto concrete or Promat sheets. Moreover the width of the fire tube complies with the German DN 120 standard that enables an easy installation to already existing chimneys. Thanks to the self-closing door, the sauna stove has been successfully tested as Type I and may be connected to multiple used chimneys.
Fresh air opening Before you begin to heat, the fresh air supply that is integrated into the door has to be opened ( just push it upwards). The sauna stove receives an excess of air and the burning starts directly without any problems. As soon as the burning has started, the primary air supply closes automatically. This leads to an extremely efficient and ecological burning.
Technical data Ȓ Performance: Ȓ Size of saune: Ȓ Height of stove: Ȓ Width of stove: Ȓ Stone capacity:
14,6 kW 5-15 m3 91,3 cm 51 cm 180 kg
Ȓ Depth of funace: Ȓ Diameter of furnace: Ȓ Efficiency: Ȓ CE sign: Ȓ 1. BImSchV:
50 cm 33 cm 78,1 % yes 1st/2nd Grade
Wood-burning stove premium line
7
Wood-burning stoves standard line
8
Low demand on fire wood 4,5 kg per hour
extra ecological
high efficiency 75.7 %
high heat output capacity: 14.4 kW
Wood-burning stoves standard line
FinTec wood-burning stovess
9 Saunaofen FT-P-120 eco
The sauna stoves of our standard line are made of 3 mm quality steel. The thickness of the furnace’s steel sheet is 6 mm, the thickness of the stove’s flipside 4 mm. This enables the extreme high stiffness of our sauna stoves.
Efficient exhaust gas conduct All of our standard wood-burning stoves have a controlled exhaust gas conduct that enables a much higher efficiency that leads to a lower demand on fire wood and a faster achievement of the operation temperature. Two big revision openings enable an easy cleaning of the exhaust gas conducts. The exhaust gas tube can either be closed horizontally or vertically, whereas the extractor has a diameter of 115 mm. Furthermore the new eco models are equipped with fireclay. This increases the efficiency and the heat storage capacity of the stove considerably.
Saunaofen FT-P-220 eco
55 kg Ȓ Weight: 0-25 m3 Ȓ Size of sauna: Ȓ Height of stove: 73 cm Ȓ Width of stove: 43 cm Ȓ Depth of stove: 51 cm Ȓ Stone capacity: 50 kg Ȓ Depth of furnace: 47,5 cm Ȓ CE sign: yes Ȓ 1. BImSchV: 1st Grade Ȓ Can be lightened from another room
Saunaofen FT-S-120
Ȓ Weight: Ȓ Size of sauna: Ȓ Height of stove: Ȓ Width of stove: Ȓ Depth of stove: Ȓ Stone capacity: Ȓ Depth of furnace: Ȓ CE sign: Ȓ 1. BImSchV:
57 kg 0-25 m3 84 cm 49 cm 61 cm 160 kg 47,5 cm yes no
Ȓ Weight: Ȓ Size of sauna: Ȓ Height of stove: Ȓ Width of stove: Ȓ Depth of stove: Ȓ Stone capacity: Ȓ Depth of furnace: Ȓ CE-sign: Ȓ 1. BImSchV:
55 kg 0-25 m3 73 cm 43 cm 51 cm 50 kg 47,5 cm yes 1st Grade
Saunaofen FT-SY-120
Ȓ Weight: Ȓ Size of sauna: Ȓ Height of stove: Ȓ Width of stove: Ȓ Depth of stove: Ȓ Stone capacity: Ȓ Depth of furnace: Ȓ CE sign: Ȓ 1. BImSchV:
57 kg 0-25 m3 84 cm 49 cm 61 cm 160 kg 47,5 cm yes no
10
Electrical heater premium line
Available with 9, 12, 15 or 18kW
Revision openings in front
Made of high quality steel sheet 1.4301
Made in Germany
Electrical heater premium line / electrical heaters standard line
Innovations that inspire
11
FinTec electrical heater
Designed, developed and produced in Germany – this sauna heater does not arise any doubts. With our new electrical sauna heaters you do not risk any experiments as it is developed and tested especially for the daily requirements in commercial sauna installations. We manufacture our sauna heater in our own production line, only using high quality material. To insure that you take much pleasure in your sauna heater for a long time, our German quality supplier produces the heating resistors with an extreme low load per cm². Moreover, all additional parts (cable penetrations etc.) are exclusively purchased from German brand manufacturers.
Strong reasons From a heating capacity of 9 kW on our sauna heaters are produced with two electric circuits to ensure high compatibility with all current sauna control systems. The glass bead blasting surface gives a noble and high quality look to the stone gabion. Thus smaller signs of use do not attract attention. The fasteners included into the sauna heaters protect the heater effectively from an accidental knock over without affecting the modern look.
Ȓ Performance: Ȓ Colour: Ȓ Size of sauna: Ȓ Diameter of the heater: Ȓ Height of the heater: Ȓ Stone capacity: Ȓ Safety distances sideways: Ȓ Safety distances to the ceiling: Ȓ For an external sauna control
Ȓ Performance: 6 / 9 kW ȒColour: grey or stainless steel Ȓ Height of the heater: 49 / 49 cm Ȓ Width of the heater: 41,5 / 41,5 cm Ȓ Depth of the heater: 30 / 30 cm Ȓ Stone capacity: 15 / 15 kg Ȓ Incl. control panel with timer and display for sauna temperature
FinTec FTo2 (for commercial use)
9 / 12 / 15 / 18 kW 100 % stainless steel 8-18 / 14-22 / 16-26 / 18-28 m3 43 cm 110 cm 160 kg 10 / 15 / 15 / 15 cm 80 / 80 / 80 / 100 cm
Optional accessory As accessory for our electrical sauna heater there is a LED illumination circlet available which has 12 LEDs and can be retrofitted without difficulty. To enable a simple installation, the silicone connection cable is already fixed to the illumination circlet. The LED circlet is connected to the power supply by a 230 V isolated ground plug. Thus an additional power supply is not necessary!
12 / 18 / 21,7 kW Ȓ Performance: stainless steel ȒColour: 17-29 / 18-32 / 20-34 m3 Ȓ Size of sauna: Ȓ Height of the heater: 66 / 66 / 66 cm Ȓ Width of the heater: 56 / 56 / 56 cm Ȓ Depth of the heater: 48 / 70 / 70 cm Ȓ Stone capacity: 40 / 60 / 60 kg Ȓ Controllable with every common sauna control panel
IKI KIUAS wood burning stoves
12
Low demand on fire wood 5,0 kg per hour
Complies with the 1st/2nd Grade of the 1. BImSchV
high efficiency 74 %
high heat output capacity: 15,8 – 20,4 kW
IKI KIUAS wood burning stoves
13
IKI KIUAS wood-burning sauna stoves Groundbreaking and of extraordinary quality – these are the IKI KIUAS wood-burning sauna stoves. This is not a vague promise but a fact that is proved by many test victories. They are made with Finnish craftsmanship of high quality stainless steel. The huge stone capacity and the efficient air conduct lead to an incomparable sauna experience.
The correct choice The performance of the oven should be chosen on the basis of the size and the material of the sauna. If the inner walls are made of stone, glass or similar materials, the stove performance needed increases by the parameter 1.2. If the inner wall consists of non-isolated planks, the parameter is 1.5. Please note that the walls and especially the ceiling have to be well isolated. An efficient circulation of air makes sure that your sauna guests are always provided with fresh air. They will be excited!
Plus size and different doors Every of the three IKI KUIAS stoves can be supplied optionally in plus size with a fire pipe extension (see picture on the right). This increased the stone capacity considerably: from 120 to 200 kg for the MINI IKI, from 240 to 300 kg for the Original IKI and from 300 to 360 kg for the Maxi IKI. Moreover, you have the choice among three glass doors: smiley, half-glass and bull’s eye. You can find these options on the bottom.
Mini IKI
Ȓ Performance: Ȓ Weight: Ȓ Size of sauna: Ȓ Height of stove: Ȓ Width of stove: Ȓ Stone capacity: Ȓ Depth of furnace: Ȓ Diameter of furnace: Ȓ Efficiency: Ȓ CE sign: Ȓ 1. BImSchV:
Original IKI
15,8 kW 45 kg 5-12 m3 58 cm 48 cm 120 kg 50 cm 27 cm 74 % yes 1st/2nd Grade
Ȓ Performance: Ȓ Weight: Ȓ Size of sauna: Ȓ Height of stove: Ȓ Width of stove: Ȓ Stone capacity: Ȓ Depth of furnace: Ȓ Diameter of furnace: Ȓ Efficiency: Ȓ CE sign: Ȓ 1. BImSchV:
Maxi IKI
19,1 kW 65 kg 10-25 m3 65 cm 60 cm 240 kg 60 cm 33 cm 74 % yes 1st/2nd Grade
Ȓ Performance: Ȓ Weight: Ȓ Size of sauna: Ȓ Height of stove: Ȓ Width of stove: Ȓ Stone capacity: Ȓ Depth of furnace: Ȓ Diameter of furnace: Ȓ Efficiency: Ȓ CE sign: Ȓ 1. BImSchV:
20,4 kW 70 kg 20-30 m3 75 cm 60 cm 300 kg 60 cm 33 cm 74,5 % yes 1st/2nd Grade
14
IKI KIUAS electrical heaters
Available from 3.3 to 30 kW
Up to 10 kW optionally with included control panel
Made of high quality stainless steel
IKI KIUAS electrical heaters
15
IKI KIUAS electrical sauna heaters Intuitional handling and a long life period – these are the main criteria for our electrical sauna heaters from IKI KIUAS. The sauna climate is not inferior at all to our traditional wood-burning stoves. As well at our wood-burning stoves, the reasoned air conduction and a huge stone capacity guarantee the incomparable steam. Special formed heating elements enable a constant heating of the SaunaStones. The small safety distances that enable sophisticated design wishes show another advantage.
Strong reasons All electrical sauna heaters are completely made of high quality stainless steel. The heating elements are made of extreme durable AISI 304 stainless steel. For the commercial sauna heaters we use first class heating elements made of AISI 309. This guarantees a long and low-maintenance usage. The maximal heating capacity of 2.0 kW per heating element assures a very low surface load of the pipe (max. 2.0 Watt /cm²). Thereby the strain of the heating elements is reduced considerably reaching a significant longer life period. Our sauna heaters are constructed and produced for a high strain and long life period. However if something should get broken, we won’t leave you out in the rain. We ensure an uncomplicated and fast spare part delivery. In contrary to most of the competitor IKI KIUAS designs and produces all sauna heaters exclusively in the country of saunas – Finnland. From the first idea to the creation of a prototype, to the production of the sauna heaters, a longtime experience and the large expert knowledge of the employees is incorporated into the implementation of the sauna heaters so that only technological mature and high quality sauna heaters leave the production in Finnland.
IKI KIUAS 7,5 kW
Ȓ Performance: Ȓ Size of sauna: Ȓ Height of stove: Ȓ Diameter of stove: Ȓ Stone capacity: Ȓ Control:
IKI KIUAS 10,0 kW
7,5 kW 7-12 m3 108 cm 34 cm 140 kg internal/ external
Ȓ Performance: Ȓ Size of sauna: Ȓ Height of stove: Ȓ Diameter of stove: Ȓ Stone capacity: Ȓ Control:
IKI KIUAS 12,0 kW
10,0 kW 10-18 m3 128 cm 34 cm 180 kg internal/ external
Ȓ Performance: Ȓ Size of sauna: Ȓ Height of stove: Ȓ Diameter of stove: Ȓ Stone capacity: Ȓ Control:
12,0 kW 14-22 m3 148 cm 34 cm 200 kg external
Sauna accessories
16
Sauna accessories Besides our original Finnish Sauna Stones there is also original Finnish accessories needed for the perfect sauna experience. This includes handmade sauna buckets, sauna lamps and thermometers made of classy Finnish wood. Moreover, pure essential oils in different fragrances are indispensable.
Sauna bucket with wooden handle
This is why our accessories are manufactured in small Finnish craft producers on purpose. Often these are one-man businesses which do this handcraft in the second or third generation. This long-term experience and the usage of high quality wood assure the best quality. Furthermore, every piece is made by hand and therefore unique.
Of course this is only an extract of our accessory programme. You can find more products at www.fintec.de!
Sauna bucket with cord handle
Ȓ capacity of 4 litres Ȓ hand-made of Nordic pine Ȓ decorated with rattan netting Ȓinterlocked side parts
Löyly dipper er
Ȓ available with 36, 49 or 60 cm Ȓ made of Nordic pine Ȓ made of one piece
9 litres sauna bucket with cord handle
Ȓ capacity of 9 litres Ȓ hand-made of Nordic pine Ȓ decorated with rattan netting Ȓ interlocked side parts
Steam dipper “IKI” I”
Ȓ length of 60 or 80 cm available Ȓ beautiful optics Ȓ made of thermo wood and stainless steel
Ȓ capacity of 4 litres Ȓ with synthetical insert Ȓ wooden handle Ȓ hand-made of Nordic pine
30 litres bucket et
Ȓ capacity of 30 litres Ȓ hand-made of Nordic pine Ȓ interlocked side parts
Sauna hat “Handbell”
Ȓ old Finnish tradition Ȓ essential for every sauna bath Ȓ made of 100 % felt
Sauna accessories Shim head-rest
Ȓ reduced to the basics Ȓ for a relaxed lying and resting Ȓ rounded down edges
Premium head-rest
Ȓ shapely and long-living Ȓ without any surface treatment Ȓ made of aspen wood
Steam oils
Ȓ more than 100 different fragrances Ȓ available in 0.2, 3, 5, 10 and 30 litres
17 Ergonomic head-rest small
Ȓ ergonomical form Ȓ high stability and solidity Ȓ perfect for the use in home saunas
Premium head-rest hanging version
Ȓ shapely and long-living Ȓ without any surface treatment Ȓ made of aspen wood Ȓ may also be used as back-rest
Tassels
Ȓ Available are: maple, birch, eucalyptus, oak and lime tassels
Ergonomic head-rest big
Ȓ ergonomical form Ȓ high stability and solidity Ȓ perfect for the use in commercial saunas
Waterfall shower
Ȓ capacity of 29 litres Ȓ UV resistant Ȓ stainless steel fixation Ȓ including fasteners
Accessoires
Ȓ Of course there is much more accessory available at our shop for the installation and the use of a sauna.
18
SaunaStones
SaunaStones
19
SaunaStones When selecting SaunaStones we especially pay attention to a high quality. Not every granite is suitable for the production of SaunaStones. In the expertise the “Geowissenschaftliche Dienst“, Dr. Olaf Otto Dillmann (geoscientist) issued, the Finnish rocks where examined for their thermal capacity. The most important criteria for quality for a high class SaunaStone is the formation of the minerals and the constituent minerals.
SaunaStones size 1
For our SaunaStones we use the Finnish SaunaStone “Olivindiabas” which is highly resistant against variations in temperature as well as the “Eliitti”, which glows in a bright red after hardening process. You receive all of our high quality SaunaStones completely cleaned and safely packed in a box and therefore directly ready for use.
SaunaStones size 2w
Ȓ high quality proved by “Bavarian State Trade Agency“ (LGA) Ȓ size above 10 cm Ȓ perfect for commercial saunas with a performance from 9.0 kW on
Eliiti – exclusive SaunaStones size 1
Ȓ high quality proved by “Bavarian State Trade Agency“ (LGA) Ȓ size around 5-8 cm Ȓ perfect for home saunas Ȓ high-end stone for sauna professionals
Round stones for natural sauna
Ȓ high quality proved by “Bavarian State Trade Agency“ (LGA) Ȓ size around 4-10 cm Ȓ for private and commercial use Ȓ for the especially smooth steam
Eliiti – exclusive SaunaStones size 2
Ȓ high quality proved by “Bavarian State Trade Agency“ (LGA) Ȓ size above 10 cm Ȓ perfect for commercial saunas Ȓ high-end stone for sauna professionals
Ȓ high quality proved by “Bavarian State Trade Agency“ (LGA) Ȓ size around 5-8 cm Ȓ perfect for home saunas with a performance up to 9.0 kW
Valkoinen SaunaStones
Ȓ size around 4-10 cm Ȓ decoration stone for sauna stoves with a high stone capacity Ȓ no erosion stone
Special stones for stone baths
Ȓ high quality proved by “Bavarian State Trade Agency“ (LGA) Ȓ batch size around 15-25 cm Ȓ perfect for stone baths, Jura stone baths, Roman baths or brick presses
FinTec Sauna- und Wellnesstechnik GmbH Reinersreuth 89 95234 Sparneck / Germany Phone: +49 92 57 / 965 00 31 Fax: +49 92 57 / 965 00 37 E-Mail:
[email protected] www.fintec.de