Transcript
3574_WW Access_408:51_52 WW Access
4/23/08
1:24 PM
Page 1
WOODWORKS® Access™ – Custom Accessible Hook-On Installation System
WOODWORKS Access Custom Curved Ceiling Key Selection Attributes • Installation system can be used with a variety of custom panels • Provides full downward accessibility • Accommodates any room design • Large size panel options up to 16 SF • Variety of veneer, perforation and reveal options • Flat, radial and curved panels available • Acoustical options with perforated panels • Meets seismic requirements Patent pending
Due to nonstandard dimensions, finishes and performance features for these custom WoodWorks systems, please call 1 877 ARMSTRONG and select options 1-1-4 to work with Architectural Specialties project management team.
Typical Applications • Office • Higher education • Healthcare • Boardrooms and other high-profile spaces • Concert halls and museums • Public spaces requiring sound absorption and reflective surfaces Full downward accessibility is available with our innovative hook-on suspension system, an Armstrong exclusive.
3574_WW Access_408:51_52 WW Access
4/23/08
1:24 PM
Page 2
WOODWORKS® Access™ – Custom Accessible Hook-On Installation System Hanger for H-bar Plug-in Clip
#12 Hanger wire 4' O.C. or as req'd by code
95.0mm [3 3/4"]
U-profile – 4'-0" O.C. or as req'd by code
Varies to create dropped/faceted ceiling
WOODWORKS Access Panel
H-bar 6mm Gasket attached in field
Miter Fold
Hook attached in field (#10 x 5/8" Phillips Pan Head 6" O.C. – screws by installer)
WOODWORKS Integral Upturns Scale 1:4 Cross Section Hanger for H-bar Plug-in Clip
#12 Hanger wire 4' O.C. or as req'd by code
95.0mm [3 3/4"]
U-profile – 4'-0" O.C. or as req'd by code
WOODWORKS Access Panel
H-bar 6mm Gasket attached in field
Hook attached in field (#10 x 5/8" Phillips Pan Head 6" O.C. – screws by installer
Miter Fold
Varies to create recessed ceiling
Curved Section with Curved U-Profile Scale: 1:13 NOTE: #10 x 5/8n screws supplied by installer
12 ga hanger wire 4'-0" O.C. or as req’d by code (by installer)
Bracing as req’d (by installer) Hanger for H-bar (2 req’d) U-profile 3' O.C. 12 ga hanger wire 4'-0" O.C. or as req'd by code
Plug-in Clips Wall anchor fastener (by installer) Wall anchor Hanger for H-bar screw attached (2 req’d) Curved U-Profile 4'-0" O.C. or as req’d by code
Armstrong curved “T” bar for back bracing – applied in field
Scale 1:6
WOODWORKS curved Access panel Scale 1:4
6mm gasket installed in field Metal hook screwed to panel in field
Curved Section with Straight/Faceted U-Profile Scale: 1:13 NOTE: #10 x 5/8 screws supplied by installer
TechLine / 1 877 ARMSTRONG 1 877 276 7876 armstrong.com/woodworks SM
CS-3574-408
© AWI Licensing Company, 2008 • Printed in the United States of America • 10% post consumer waste. Printed with vegetable inks.
Recyclable.
