Transcript
Workshop Equipment
Quality Technology Service
For over 35 years, RODCRAFT stands for high quality, value-added products and services. Founded at Mülheim an der Ruhr, Gemany, RODCRAFT has grown steadily to become one of the world's leading suppliers of pneumatic tools and equipment in the market segments concerned. Our active engagement in the market and the quality of
Distribution
our products, has earned us a brand recognition level of over 86% in our major markets. Continously improving our products, services and processes, our product company and many customer centers are ISO 9001 and ISO 14001 certified. We are constantly investing in our capabilities, in order to match our customers future demands.
Training Facilities and Trade Shows
Our customer centers and warehouse facilites are covering with our distributors over 80 countries worldwide on a daily basis. So we are close to our customers and can give a fast service and support.
3D-CAD Design For many years, RODCRAFT's use of computer aided 3 dimensional design (3D-CAD), has greatly shortened product development cycles and improves the communication with manufacturing. Many of our products feature patented designs, exclusive to RODCRAFT, such as our new composite sander and impact wrench series. Our trained technicians are able to quickly implement new market-driven ideas, into full-scale production models for modern high performance and ergonomic tools.
Customer training and seminars are regularly held by our skilled staff in Germany and at our customer centers.
Testing Capabilities Our state of the art testing equipment, located at our headoffices and in the service centres, is an integral part of our leadership strategy, supplying safe, high quality and performance products to our customers.
RODCRAFT's international and regional trade show presence.
2
:66LQGG
Content www.rodcraft.com
RODCRAFT
Content
page
2
3
Transmission Jacks and Accessory Start Boosters
4-5
Drain Pans Oil Collection Units , Oil Suction Units
6-7
Creeper / Seat Hydraulic Straightener, Pull Clamps
8-9
Hydraulic Ram Sets, Pneumatic-Hydraulic Pump Hydraulic Cylinders
10 - 11
Bottle Jacks Jack Stands
12 - 13
Aluminium Trolley Jacks Trolley Jacks for Cars
14 - 15
Hydraulic Trolley Jacks and Air-hydraulic Jacks, telescopic for Trucks and Commercial Vehicles
16 - 17
Single Wheel Dolly, Hydraulic Wheel Lift Trolley Hydraulic Vehicle Positioner, Motor Bridges
18 - 19
Workshop Cranes and Accessory Motor Stands
20 - 21
Workshop Presses
22 - 23
Accessories
24 - 25
Addresses
26 - 27
3
:66LQGG
Transmission Jacks
Transmission Jack, Fully Operated by Foot Hands-free operation with foot pedals • Universal and mobile transmission jack with hydraulic foot pump • Lifting by foot pump without locking at positions, hands-free • Foot pedal also for descent, handsfree (dead man auto-stop valve) • extra low, large safety chassis • Includes the transmission claw. • When inversing the claw, a saddle plate (model GHT) can be inserted as „mechanic‘s third arm“ in order to push up or hold something, i.e. the exhaust system. This plate with rubber cover is available as an extra accessory. • according to EN 292
model GH 31 GH 75
article no. 8951086031 8951086070
GH 31
A
Transmission Jack, Hand Valve for Lowering Mobile hydraulic transmission jacks with foot pump • Chromed piston rod to prevent stains • Precise hand valve for easy to control descent speed (dead man auto-stop valve) • Oil and acid resistant wheels • Includes transmission claw • according to EN 292
model GH 300 GH 500
article no. 8951086030 8951086050
B
A
weight
AxB
diam. piston
diam. male end
max.
[kg]
[mm]
[mm]
[mm]
2070
25
550
24
24
0,5
1220
2045
28,2
625 x 605
25
30
0,5
500
1245
2065
33,4
625 x 605
30
30
0,7
750
1230
2050
32
650
29
24
0,7
model
article no.
[kg]
min.
GH 31
8951086031
300
1230
GH 300
8951086030
300
GH 500
8951086050
GH 75
8951086070
capacity
height [mm]
oil volume approx. [l]
4
:66LQGG
Accessory for Transmission Jacks Start-Booster www.rodcraft.com
Saddle Plate (mechanic’s 3rd arm) • „Mechanic‘s third arm“ push plate with rubber cover that can be inserted into the inversed claw of our transmission jacks models GH 31, GH 75, GH 120 and GHT 1200 • Diameter of plate 150 mm Rubber Cover available as model RHA. GHT
model GHT
article no. 8951011034
Start-Booter for Car / Truck Batteries
Made in Europe
• Mobile and handy aid for start-ups and as a portable source of energy - 2 versions available: for cars (12V) and for trucks (12V and 24V) - also good for boats and camping. • Contains modern 100% gas-proof-sealed battery cells (AGM) with high energy density and 1st-class manufacturing (european quality product) with long life-time. Can be used in all positions. • Highly flexible long cables (180cm/170cm) offer best access to the vehicle‘s battery. With large cross section (28 and 50 mm²) and professional solid copper clamps - externally fully insulated against unintentional contact - internally connected jaws (conductive band) for large conduction surfaces for high current transfer. • Shock-proof, easy maintenance ABS-housing with practical storage for the cables. • Including an automatic charger (no surcharging, booster can be kept on recharging until needed) and equipped with a cable for use on a car’s cigarette-lighter socket in order to recharge while driving and to recharge the vehicle‘s battery vice versa. • With 5 LED-indicator showing the charging state and with socket (cigarette lighter type). • Protecting against voltage peaks and preserves memorised data in car computers and radios etc. • Also under extreme temperature conditions (-40°C up to +45°C) our boosters deliver reliable energy i.e. for starting up an engine.
BOS12-XA
BOS1224
12V
model / article no.
3500 A.p.
voltage starting current (amps peak) starting current (amps continuous) weight recharging capacity recharging voltage (net to charger) recharging voltage (charger to booster) recharging time cycles * cable cross section cable length protection against over-tension batteries sealed (liquid and gas) booster batteries batteries in booster automatically regulating charger recharging cable solid copper clamps totally insulated shock-proof housing ABS dimension booster WxTxH
12V/24V 3400 A.p./ 1700 A.p.
BOS12-XA 8951000062 [V] [A.p.] [A] [kg] [Ah] [V] [V] [h] [times] [mm²] [cm]
[number] [Ah]
[mm]
12 3500 1150 10,2 1,5 (12V) 230 14,9 15 500 28 170 x x 12V 23Ah 1 x x x x 380 x 190 x 335
BOS1224 8951089060 12 3400
24 1700 700 17,9 4 (12V) 230
14,9
25,2 8 500 50 170 x x 12V 32Ah 2 x x x x 385 x 290 x 355
* based on discharges up to 50%
5
:66LQGG
Drain Pans Oil Suction Units
Drain Pans
• 3 handles for carrying • Anti-splash rim • Made of oil and petrol resistant polyethylene (HDPE)
B
b
Model P 46 Model P 2 model P2 P 46
H
article no. 8951000057 8951000058
l L
model
article no.
capacity [l]
weight [kg]
L [mm]
l [mm]
B [mm]
b [mm]
H [mm]
P2
8951000057
8
0,7
515
325
390
300
145
P 46
8951000058
16
0,95
570
360
450
390
175
Oil Suction Unit
• Ergonomic Design with lightweight Composite Housing (only 14 kg net). • Mobile oil suction tool with 2 wheels • Easy oil removal through dipstic opening with nozzles or with adapter socket • Works indepen dantly without permanent connection to air supply • Incl. flexible nozzles 5, 6 and 8 mm and straight rigid nozzles 6 and 8 mm (800 mm length) • Direct oil removal with 3 suction adapters (included in delivery) for Mercedes-Benz, BMW and Volkswagen-VW. Ø 16.0 mm adapter Mercedes Ø 5.4 mm adapter VW Golf Ø 12.3 mm adapter BMW • Compact and handy construction easy to move because of wheels • Easy emptying of the tank using compressed air (max. 1.4 bar) NOTE: Oil should be warm for removal Due to fast changing car series please always check feasibility of oil removal through dipstick tube with/without adapters prior to operation.
model AK 03
article no. 8951081000
6
:66LQGG
Oil Collection Units Oil Suction Units www.rodcraft.com
Oil Collection up to 80 ltr. by Gravity
Oil collection unit with low profile and large tank capacity for cars as well as small trucks. Tank can easily be emptied using compressed air. • drain pan adjustable in height • tank can easily be emptied using compressed air (equipped with safety valve) • very ergonomic and good to manoeuvre due to 2 wheels on axle and 2 swivel wheels with large diameter • large drain mesh in the pan, easy to reach with the hands • each drain pan is equipped with its own valve, so the tank can be emptied meanwhile an oil service or while the pan is still containing / collecting oil. This means oil services can be done in a fast frequence capacity of the tank can be superceeded by using the pan additionally.
NOTE: Oil should be warm for removal !
model TK 05
model article no. tank capacity up to oil level indicator / max. capacity
article no. 8951081013
unit
TK 05 8951081013
AK 03 8951081000
l
70 / 80
19 / 24
l
25
–
max. dimension (l x w x h )
mm
470x595x1620
375x375x900
min. dimension (l x w x h )
mm
470x595x1070
–
pan capacity
max. dimensions (l x w x h ) with pan down on floor
mm
x
–
min. dimensions (l x w x h ) with pan down on floor
mm
x
–
height of pan (down on floor)
mm
x
–
dimension pan (l x w x h)
mm
Ø. 460
max. pressure for emptying
bar
0.5
5-6
weight (empty)
kg
23
14
air inlet (Euronipple)
inch
–
1/4 ”
max. Vakuum
bar
–
0,6 - 0,7
l/min
–
0.9
flow rate with flexible nozzle diam. 6 mm (oil temperature 70 - 80 °C)
l/min
–
1.3
flow rate with flexible nozzle diam. 8 mm (oil temperature 70 - 80 °C)
l/min
–
3.4
flow rate with adapter or ridgid nozzle diam. 8 mm (oil temperature 70 - 80 °C)
l/min
–
4.8
flow rate with flexible nozzle diam. 5 mm (oil temperature 70 - 80 °C)
7
:66LQGG
Creeper / Seat Hydraulic Straightener
Foldable Creeper/Chair • Creeper - Chair in one, practical for various working heights • Creeper : for working on floor without lift (use jack stands !!) • Chair : for medium high working spots (fenders, doors, front area of car) Ergonomic design especially for tiring work Folding mechanism with safety lock against unintended folding 1. Easy and stable to move on seven large wheels diameter 63 mm oil and acid resistant 2. Comfortably upholstered and covered with easy to clean surfaces 3. Ergomically favored height of seat for medium high working spots 4. Head rest adjustable in 3 positions to give relief for the neck when working in awkward positions 5. Low height when used as creeper 6. Sturdy steel construction with black powder coating 7. Storage area for tools, sockets, light (upholstery at feet can be folded up) 8. capacity 90 kg
model RSF 01
height seat
min. height
length
width
[mm]
[mm]
[mm]
[mm]
weight [kg]
480
150
1250
450
14
model RSF 01
article no. 8951089021
Mobile Hydraulic Straightener with 10 t Ram
• Easy to move on oil and acid resistant plastic wheels • The strong 8“ 10 t hydraulic ram has sufficient power for toughest straightening duties. • Being able to tilt the pull arm sideways (up to 45° left and 45° right) ensures an optimum adaptation to the car body. • The hand pump can be controlled precisely in order to serve also for smaller or even delicate straightening applications. The air-hydraulic pump is an ideal supplement for this tool that will save time and reduce the manual effort. Please see page 9. Model RGS 100
The delivery includes: 1x manual pump with high pressure hose (length 1.50 m), 2x chain with length of 1.50 m (model RGS100K - 8951011083) with hook (model RGS100H - 8951011082) 2x jack stand, adjustable in height (model RGS100UB - 8951011080) 2x body clamp*, long type (hole diameter 75 mm) (model RGS100UK - 8951011084), 1x supporting pipe length 1,80 m, diameter 74 mm (model RGS100QU - 8951011081) 2x universal pull clamp with ring (895031593), 1x counter support, complete (shark‘s fin) order no. 8951089054
RGS100QU RGS100UB
RGS100UB
RGS100K
RGS100H
RGS100UK
* model
article no.:
RGS100UK RGS 100
8951089054
weight 895031593
A
B
C
D
E
gradient
[mm]
[mm]
[mm]
[mm]
[mm]
º
[kg]
2900
1600
600-730
0-1900
720
2 x 45º
230
8
:66LQGG
Creeper Pull Clamps www.rodcraft.com
Creeper • Solid construction made of plastic • Extra low area at arms for more freedom • Upholstered head rest • Two easy to reach storage areas for parts and tools • 6 large oil resistant wheels for noise and vibration reduced moving • Wheels with rubber coating and swivel joint • capacity 90 kg
model
min. height
length
width
[mm]
[mm]
[mm]
weight [kg]
115
1005
480
4,8
RSF 02
model RSF 02
article no. 8951089020
Pull Clamps Model 101
Model 101 N
Model 102
Model 102 N
Model 102 NN
one pulling direction
two pulling directions
symmetric jaws, one pulling direction
asymmetric jaws, one pulling direction
asymmetric jaws, two pulling directions
Model 301 extra flat, quick chain hook
Model 402 one pulling direction
Model 601
Model 601 N
one pulling direction, extra broad grip, quick chain hook
two pulling directions, extra broad grip, 2 quick chain hooks
chain shortener Model 901
model article no.:
101 101 N 102 102 N 102 NN 301 402 601 601 N 901 8951011064 8951011066 8951011065 8951011067 8951011068 8951011069 8951011070 8951011072 8951011073 8951011071 225
220
240
total width [mm]
85
120
total height [mm]
70
45
total length [mm]
230
240
260
180
180
125
90
45
35
180
200
155
65
180
120
120
65
40
80
45
70
150
65
height of grip [mm]
22
25
15
15
15
25
15
15
15
-
width of grip [mm]
40
43
35
35
35
30
45
120
120
-
M16x70
M16x70
M14x120
M14x110
M14x110
M14x68
-
M14x68
M14x68
-
1,8
1,8
2,0
2,0
2,1
1,6
2,4
2,3
2,7
1,3
bolt/nut weight [kg]
9
:66LQGG
Hydraulic Ram Sets
Hydraulic Ram Set 10 t, 38 piece • Application: pulling - pushing - widening - clamping • Set is equipped with threaded connections (2"PT11UN) for pulling • Movable due to included trolley, light and easy to use • 2-step hand pump • Including a full set of accessories 10 t push ram 350 - 500 mm
Accessory see page 23
model HPP 10
article no. 8951089082
Incl. Trolley 5 t pull ram 665 - 509 mm
Hydraulic Ram Set 17 piece • Application: pushing - widening - clamping • Quick and easy assembly because of unthreaded socket connections • 17 piece set in a durable plastic case for easy storage. Each piece with ist own moulded compartment to keep the set complete - NO LOOSE STYROFOAM MOULDS • Includes full set of accessories
4 t push ram 268 - 388 mm 10 t push ram 320 - 450 mm
Accessory see page 24
(without figure) (see figure)
model
article no.
HRS 04 (4 t) HRS 10 (10 t)
8951089083 8951089074
Hydraulic Ram Set 20 piece • Application: pushing - clamping • All accessories in steel with threaded connections • For transport companies and truck repair centres • 2-step hand pump for 700 bar working pressure • Stored in 2 durable metal boxes • Including full set of accessory • 130 mm stroke of hydraulic cylinder • Hose length 1500 mm (pump/cylinder)
model HRS 20 (20 t)
20 t push ram 280 - 410 mm
article no. 8951089081
Accessory see page 24
10
:66LQGG
Pneumatic-Hydraulic Pump Hydraulic Cylinders www.rodcraft.com stroke cylinder diameter cylinder / ø with [mm] rubber cap [mm]
diameter piston [mm]
min. length [mm]
max. length [mm]
oil volume cylinder / pump [l]
max. pressure [bar]
120
40 / 44
25
268
388
0.4 / 0.4
700
HRS 10
130
56,5 / 63
40
320
450
0.5 / 0.5
700
HRS 20
130
90
60
280
410
0.9 / 0.9
700
HPP 10
150
57
38
350
500
0.5 / 0.5
700
8951011063
10 - 01
8951012036
111 - 01 112 - 01 110 - 01
HRD04F
HRD10F
8951089077
HRD10K
8951089078
10-04
8955510788
111 04
8951011980
112-02
8951012014
111-03D
8951011995
110 03C
8951012011
10-03
8951012038
HRD10
8951089079
HRD02
8951089075
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
HRS 10 HRS 04
• •
HRS 20
• •
HRS 10
HKZ12B
8951089084
HRZ05B
8951089080
• •
8951011978
HRS 10
•
8951012013
HRS 20
8951011997
HRS 04
-
• •
set
HPP 10
-
RGS100
PHP 10
_
HPP 10
model no. article no.
HRS 04
within set
HPP 10
PUMPS
CYLINDERS APPLICABLE pulling and pushing cylinders, hollow cylinders and spreaders
HPP 10
model-article no.
HRS 04
8951089076
set model
RGS100
•
•
• • •
•
•
•
• •
•
•
• •
•
•
•
•
•
•
•
•
• combination possible
Pneumatic-hydraulic Pump • Convenient and easy to handle, operation by hand or foot • 1-step silenced pump with high performance • Ideal in combination with large rams like HRS 10 and dozer RGS 100 • Maximum hydraulic pressure 700 bar • Oil capacity 0.7 l, hydraulic high pressure hose length 1,5 m
Pull Ram
model PHP 10
Push Ram
• Pullling force 5 t • Stroke 156 mm • Thread on cylinder 1/4“ • Length maximum 665 mm (including hook)
• Pushing force 10 t • Stroke 250 mm • Length minimum 463 mm • Thread on cylinder 1/4“ female
model HRZ 05
model HRD 10
article no. 8951089080
Push Ram, flat • Pushing force 4 t / 10 t • Stroke 15 mm / 10 mm • Min. height 42,2 / 42 mm • Length min. 65 mm / 83 mm • Width 45 mm / 58 mm • Thread on cylinder ¼“ model article no. HRD 04 F 8951089076 HRD 10 F 8951089077
Push Ram, short • Pushing force 10 t • Hydraulic stroke 50 mm • Length minimum 130 mm • Thread on cylinder 1/4“ female
model HRD 10 K
:66LQGG
article no. 8951011063
article no. 8951089078
article no. 8951089079
Push Ram • Pushing force 2 t • Stroke 75 mm • Length minimum 140 mm • With threaded extention bar 50 mm • Thread on cylinder 1/4“ female model HRD 02
article no. 8951089075
Hollow piston hydraulic cylinder • Pushing force 12 t • Hydraulic stroke 41 mm • Height minimum 145 mm • Hole in piston 19.5 mm • Thread on cylinder 1/4“ female • Pulling and pushing with one cylinder possible e.g. for pulling of threaded rods, bolts etc. but also for production of motors - with threaded extension • Piston treated by salt bath nitriding for better resistance against corrosion and equipped model article no. with exchangeable saddle plate (ring)
HKZ 12
8951089084
11
Bottle Jacks
Hydraulic Bottle Jacks with Threaded Extention
The hydraulic system with mounted manual pump is powerful, compact, versatile, clean. • maximum capacity and durability, because of double guidance • 100% seal, robust and easy to disassembly, by automatic welded construction • high standing and stability, due to large base plate • vertically and horizontally applicable, as long as the pump points upwards ! • fast and easy adaptable in the height, per threaded extension within piston) • with safety valve against overloading • steel piston made of one piece for extra durability • practically to stowage, handle on pump consists of two parts to assemble/disassemble
Welded design – no leaks
Tested according to DIN 76024
MGN 2
MGN 3
MGN 20
MGN 30
MGN 8
MGN 30
8951000015
MGN 20
8951000014
MGN 12
8951000013
MGN 8
8951000012
MGN 5
8951000011
MGN 3
8951000010
MGN 2
article no.
8951000009
MGN 12
model
MGN 5
capacity
[t]
2
3
5
8
12
20
30
weight
[kg]
2,4
2,9
3,8
5,8
6,7
9,1
18,3
A (min)
[mm]
180
190
200
200
180
185
285
A+B (max)
[mm]
305
325
340
320
275
280
455
C (+thread)
[mm]
55
65
60
80
75
35
/
D
[mm]
360
390
400
400
350
315
455
E
[mm]
110
115
130
150
165
180
190
F
[mm]
20
70
75
90
105
120
140
G
[mm]
20
23
29
35
43
53
62
12
:66LQGG
Jack Stands www.rodcraft.com
Jack Stands
• welded, sturdy steel tube construction, strutted and easy to carry (16 t jacks made of solid steel struts with plate in the middle). • good standing stability since each foot is equipped with a broad plate. • massive steel stem with 1,5 t models and jack stands with fine adjustment by threaded spindle ergonomic steel tube stem for easier carrying on other jack stands with large bolt on chain and safety clamp • full choice of various heights, capacities, partly equipped with finely adjustable threaded stems. The program comprises the whole automotive section and partly also the truck and bus equipment. USBN5.0 finely adjustable with rubber protector on top UBN5-GT (Art. Nr. 889108) especially suited for vans and busses with sheet metal bodies and low clearance. TÜV* and GS* approved safety and long time experience.
USB 1.5 USB 3
USBN 5.0
USB 1.5 H
USB 5
USB 8 USB 12 G USB 12 HG
USB 8 H
capacity
[t]
weight
1,5
1,5
3
5
5
USB16 H
8951085161
USB12HG*
8951085121
USB12G*
8951085120
USB 8 H*
8951085081
USB 8*
8951085080
USBN 5*
8951085051
USB 5*
8951085050
USB 3*
8951085030
8951085011
article no.
USB 1.5 H*
USB1.5*
model
8951085010
USB 16 H
8
8
12
12
16
[kg]
2,2
3,6
3,8
5,0
4,3
7,9
11,4
10,6
14,4
19,5
min. height
[mm]
260
430
320
370
245
385
580
345
475
430
max. height
[mm]
405
700
530
580
350
600
950
515
730
725
stroke
[mm]
145
270
145
210
95
215
370
170
255
295
5
direct
6
direct
direct
5
positions in height
5
5
5
5
13
:66LQGG
Aluminium Trolley Jacks Trolley Jacks for Cars
Hydraulic Trolley Jacks - Made of Alloy for Cars • The ideal jack for taking into the trunk for break-down service, ralley support and service on the spot for customers - for instance to change to winter tyres at the customer • short 2 piece handle bar • sufficient capacity for lifting also good for normal passenger vehicles (Please note that 1300 kg = 1,5 Amercan Short Tons !) • ergonomic net weight and for an easy transport the jacks are equipped with carrying handle(s) - RH135: 1 handle, RH201: 3 handles. • fast stroke RH135: with 11 pump strokes up to the max. – without load ! RH201: with double pump • saddle plate protection with rubber cover • lever with protective sponge to prevent scratches on car bodies.
only 10,5 kg
1,3 t
80 - 295 mm
only 20,5 kg
RH 135
2t
85 - 460 mm
RH 201
for technical specifications see page 13
Small Hydraulic Trolley Jacks
Accessory
• pump lever can be disassembled (2 piece) for easy storage and transport
Model C 225 / RHA Rubber cover diameter 137 mm (C 225) for RH 290 150 mm (RHA) for RH 225
model RH290: with quick lifting pedal for fast approach
model C 225 RHA
article no. 8951011092 8951011033
Model STRH
2,25 t
3t
120 - 490 mm
Steel saddle with vulcanised rubber top diameter 123 mm for RH225, RH290, RH251, RH301, RH501
145 - 510 mm
RH 225
Model STRH
RH 290
article no. 8951011093
30 mm
14
:66LQGG
Trolley Jacks for Cars www.rodcraft.com
Hydraulic Trolley Jacks up to 3 t
• Hydraulic trolley jacks with sturdy steel construction for daily workshop use. • With precise hand valve for lowering • Equipped with smooth oil and acid resistant plastic wheels • Long pedal for fast approach and quick lifting of smaller loads • Pump lever with protector sponge * to prevent paint scratches / Pump lever with T-end ** for two-handed operation with valve on the lever top. Model RH151 low profile jack with extra long body to get very deep under a vehicle up to 515 mm at a height of only 80 mm, typical for some sports cars and old timers. Compact when disassembled with 2 piece pump lever for easy transport and storage. Model RH 215 versatile car trolley jack with low profile and large final height (75 - 505 mm), fast lifting stroke due to two pump pistons and ergonomic foot pedal. Compact when disassembled with 2 piece pump lever for easy transport and storage. Model RH 251 high lifter up to 800 mm max. Model RH 301 powerful jack also well suited for vans. The front wheels are easy to position when pressing slightly onto the foot plate at the rear side of the jack.
RH 151
1,5 t
80 - 620 mm
RH 151
515 mm
RH 151 80 mm
RH 215
RH 215
295 mm
75 - 505 mm
2t
80 mm
RH 215
RH 251 135 - 800 mm
2t
RH 301
*
model
article no.
**
3t
capacity [t]
A
B
115 - 605 mm
weight
dimension (mm) C
D
D2
E
F
G
[kg]
RH 135*
8951082025
1,3
295
80
375
505
1440
130
235
235
10,5
RH 151*
8951000051
1,5
620
80
540
920
2140
153
282
382
50,5
RH 201*
8951000003
2
375
85
460
695
1820
155
285
320
20,5
RH 251**
8951082024
2
665
135
800
1340
2100
190
295
430
58
RH 215*
8951082026
2
430
75
505
750
1960
150
270
375
39,4
RH 225
8951082020
2,25
370
120
490
655
1670
170
260
350
38
RH 290
8951082031
3
365
145
510
650
1650
160
275
350
41,5
RH 301**
8951082032
3
490
115
605
1320
2440
190
245
315
70
B: with saddle
:66LQGG
15
Hydraulic Trolley Jacks and Air-hydraulic Jacks for Trucks and Commercial Vehicles
Hydraulic Trolley Jacks for Trucks • All equipped with quick lifting pedal for fast approach. • Hydraulic system with pump lever allows autonomous operation without compressed air Model RH 501: easy to position due to foot rest on back (turning on the spot). Lever can be blocked in 3 angles for storage and positioning deeply under a low vehicle. Grease nipples on all important joints.
5t
Model RH 310 with LCS lowering control system for slow descent even when heavily charged. "Dead man control" auto-stop valve.
RH 501
10 t RH 310 model
article no.
capacity [t]
weight
dimension (mm) A
B
C
D
D2
E
F
G
[kg]
RH 501
8951082050
5
530
150
680
1420
2560
205
290
360
95
RH 310
8951082100
10
430
175
605
1600 2550
270
380
410
123
B: with saddle
Air-Hydraulic Jacks for Trucks and Heavy Vehicles 435 mm
Models LHH with one piece solid piston Models LHHT with telescopic piston (up to 4 telescopic elements) for low clearance • Oil and acid resistant wheels • Easy to move and to position • Large rest plate for safe and stable lifting • Handle can be locked in 3 angles, control valve on handle • With auto-stop safety valve, overload control and safety valve against hose breakage and air supply interruption
488 mm
325 mm
368 mm
20 t
32 t 210 mm
LHH 22
255 mm
LHH 35
Models LHH22 / LHH35: • Short and compact version, very easy to manoeuvre • Overload control and safety valve against undesired descent in case of interruption of the air supply • Including clearance adapters: with broad saddle diameter 68 mm and height 20 mm / with diameter 48 mm and heights 20 mm / 60 mm / 100 mm • The piston is retracted by 4 springs that are easy one-piece, solid accessible lifting piston • Including an integrated threaded extension (length 110 / 120 mm) • With front handle for easier carrying • CE certified • Air supply pressure needs to be 7 - 10 bar, air consumption 300 l/min • According to EN 292
20 t
one-piece, solid lifting piston
32 t
LHH 22
16
LHH 35
for technical specifications see page 15
:66LQGG
Air-hydraulic Jacks, telescopic for Trucks and Commercial Vehicles www.rodcraft.com
Air-Hydraulic Jacks, Telescopic for Trucks and Heavy Vehicles Telescopic jacks, ideal for servicing trucks, buses and construction site vehicles • fast and easy lifting / lowering – controlled from the handle Instead of manual power, the jacks are air powered (air-hydraulic pump) and “remote”-controlled from the handle with a joy stick. • manoeuvring with ease, deep under a vehicle The long handle bar and the control panel at the end on the grip allow pushing the jack far under the suspension. The handle bar locks in 3 positions. • automatic stop-valve (dead man) For safety the jack stops all movement automatically when the joy stick is released. • 3 extension adapters / saddle plate Due to a hole and bolt construction they can be stacked – good for extremely high axles. All adapters can be properly stored for transport in a pocket on each side of the jack. • carrying handle on the cylinder for transport • soft rubber wheels – silent, smooth to the floor. Safety at work : lifted loads need to be secured by a mechanical mean, RODCRAFT jack stands are the ideal accessory to our jacks.
30 t max. 50 t max.
Low Clearance Large Stroke
Extensions
d d l d l
LHHT30-2 LHHT50-3
l 50 mm 10 mm 50 mm 10 mm
d d l d l
l 50 mm 60 mm 50 mm 45 mm
d l d 70 mm l 120 mm d 70 mm l 75 mm
15 t 30 t
F2: 370 mm
10 t
F2: 300 mm
F2: 280 mm F1: 220 mm
25 t F1: 220 mm
50 t
LHHT 30-2
A: 155 mm
A: 155 mm
LHHT 50-3 LHHT 30-2
model
article no.
LHHT 50-3
P
[kg]
air consumption [l/min]
weight
capacity [t]
dimension (mm) A
B
C
D
D+E
E
F
G
LHHT30-2
8951000007
30/15
155
165
290
360
465
105
F1/F2
1300
68/20
48
340
LHHT50-3
8951000008
50/25/10
155
180
230
525
660
135
F1/F2/ F3
1300
68/20
63
340
LHH22
8951084201
20
210
205
320
330
430
-
325
1200
50
49
300
LHH35
8951084350
32
255
250
330
510
610
-
368
1200
50
54,5
300
operating air pressure : 7- 10 bars
:66LQGG
17
Single Wheel Dolly Hydraulic Wheel Lift Trolley
Single Wheel Dolly 250 kg Sturdy and handy assembly aid for various types of wheels (for trucks, vans and cars). • adjustable arms for various wheel sizes (width 29 – 62 cm) • equipped with rollers for easy positioning of wheels onto the vehicle’s stud bolts or holes in the brake disk. • with stop rollers on the rear side that avoid pushing the wheel onto the frame • ergonomic handle with rounded and soft safety grip • for best adaptation to any user the handle is adjustable in its length (3 positions) • max. capacity 250 kg
model
article no.
RHW1
89510 89091
Hydraulic Wheel Lift Trolley
• Application: quick and easy disassembly and assembly of truck wheels and wheel sets, with or without brake drum. Easy loading and transport to or from the lathe, tyre mounting machine or axle. • 2 swivel front wheels and 2 fixed rear wheels facilitate moving and precise positioning of the lift in order to avoid damage to axle bolts (no more tapping for repair of bolts needed) • Saves time and contributes to safety and worker‘s health (spine) • Practical foot pedal for lowering the lifted wheels (dead man auto-stop valve) • Sturdy chassis made of square steel bars with max. capacity 700 kg • Retaining arms can be adjusted sideways for small wheels as well as wheel sets • Each loaded wheel rests stable and can still be turned individually when loaded because of 2 broad chromed rollers on each retaining arm. • Oil and acid resistant heavy duty wheels with large diameter • Partly foldable and legs can be taken off for storage an easier transport in service cars • The asymmetrically installed hydraulic unit on one side offers enough space to get access to the wheel hub and bolts even for 1“ impact wrenches etc. • Hydraulic construction for less maintenance in contrast to chain/roller construction
model
RHW 702
article no
capacity [kg]
weight [kg]
oil l
stoke [mm]
8951089046
700
130
0,6
525
RHW 702
dimension [mm] amin / amax
bmin / bmax
480 / 750 1150 / 1400 between rollers b, c, d: external dimensions
height of lifting arms [mm]
c
d
oben
unten
990
1000
105
630
upper limit of rollers
18
:66LQGG
Hydraulic Vehicle Positioner Motor Bridges www.rodcraft.com
Hydraulic Vehicle Positioner • For easy positioning of cars - moving in all directions also side ways and turning on the spot - ideal for use in confined areas. (e.g. workshops, show rooms, parking buildings, exhibitions, studios - for heavyly damaged vehicles and when the motor / gear was disassembled etc., as well as for locked and blocked cars) • Simple to use with foot pedal (less tiring than manual systems) • Some pedal strokes are sufficient to pull the arms together and lift the wheel. • Less effort due to easy moving hydraulic power. • The wheel is lowered again when turning the valve knob (also for setting the tool in the mechanical blocking position releasing the hydraulic pressure) • Robust hydraulic system instead of high maintenance mechanical mechanism (no regreasing of gears etc.). • Good for tyres up to a width of 300 mm and a diameter of 650 mm • Weight 18 kg • Capacity 600 kg (each) model
article no.
RG 600
8951089045
Transmission and Motor Repair Bridge
Delivery includes one chain with 2 hooks • Capacity 400 kg • For cars with motors built lengthwise or crosswise • Instantaneous set up on the vehicle even when positioned asymmetrically on the car • Quick and easy positioning of the motor for trouble-free fitting or removal of the transmission • Well balanced load because of 2 spindles • Galvanised • Certified chains and hooks according to norm DIN EN 818 part2 available, see accessories.
model
MGM 1
article no
8951089066
capacity [kg]
min. [mm]
max. [mm]
stroke of spindles [mm]
400
1100
1600
265
distance between feet
height w/o spindle
200
[mm]
model
article no.
MGM 1
8951089066
spindle thread
weight
M 14
14,8
[kg]
19
:66LQGG
Workshop Cranes Accessory for Workshop Cranes
Workshop Crane, foldable, one person operation possible • Equipped with auto-stop safety valve • Extra low height of the legs and wheels i.e. even driving under a Europallet is possible in order to pick up a load from there • Very compact because of foldable front wheel legs • Easy to position over load due to 2 fixed wheels at front and 2 swivel wheels at rear end, oil and acid resistant quality • Hoist arm with 3 positions of extension • Swivel pump and swivel pump lever for best access to the pump and operation of the pump from the work place • Lifting of the arm by pumping up and down from the work place • Lowering of the arm by pushing the lever up and backwards meanwhile the precise control and positioning of the load is possible with the other free hand
model WK 51 KM WK 201 KM
Model
order no.
capacity [kg] according to the position of extension P1
P2
P3
weight [kg]
P4
WK 51 K
8951080050
500
400
325
–
92
WK 102 K
8951080101
1000
750
500
250
77,5
WK 201 KM
8951080200
2000
1750
1650
-
173
Model
article no. 8951080050 8951080200
dimension in mm
order no. A
E
G
J
K
L
M
P
S
R
min
R
med
R
max
WK 51 K
8951080050
1400
1970
2080
1500
820
970
80
465
450
1050
1150
1250
WK 102 K
8951080101
1560
1920
2120
1480
825
935
160
430
440
960
1060
1160 / 1230
WK 201 KM
8951080200
1720
2340
2500
1900
1035
1160
200
635
570
1275
1420
1570
Motor / Load Positioner • For Assembly and Disassembly of e.g. motors, using a workshop crane • Chain flange can be attached to the motor. The chains are hooked on one side into the flanges and on the other into the MP 500 at appropriate length • By turning the crank the hook-up ring is shifted sideways which tilts the load in order to obtain correct positioning for assembly / disassembly • Certified chains and hooks according to norm DIN EN 818 part2 available, see accessories.
technical specifications: Capacity 500 kg Width 655 mm Height 205 mm Length of chain 1030 mm
model MP 500
article no. 8951089050
20
:66LQGG
Workshop Cranes Motor Stands www.rodcraft.com
Workshop Crane, foldable, one person operation possible • Very compact because of foldable front wheel legs • Due to its large capacity of 1 ton and the adjustable lifting arm (4 positions) this crane is very versatile for optimum garage use. • With double effect hydraulic pump that can be operated from standing at the side of the crane including a „dead man“ auto-stop valve. • Additional small wheels for moving the crane also easily when folded up. • with oil and acid resistant wheels, the rear wheels swivel, the front wheels are fixed. • The lifting arm can be extended in 4 positions
model
article no.
WK 102K
8951080101
Motor Stand • Universal aid for more ergonomic work on motors for assemblies, disassemblies and repairs. • Improves ergonomy when working on motors due to its comfortable working height and the swivelling fixation plate (360°, can be locked every 60°)
• Capacity 500 kg • Net weight 29 kg • Dimension: length 900 mm x width 785 mm, height 980 mm • Centre height of the suspension plate: 910 mm • The motor suspension arms can be adjusted from a minimum radius of 310 mm up to a maximum radius of 435 mm • At the end of each suspension arm bolts can be fixed through the pipe shaped end of the arm into the motor (bolt length approx. 60 mm, max. thread M14) bolts are not included in the delivery
model
article no.
MMB 500
8951089048 21
:66LQGG
Workshop Presses
Slim Presses up to 30 t, manual only
Bench Press
Hydraulic Workshop Press With manual hydraulic pump • Piston with threaded extention 75 mm for fast adaptation to smaller clearances due to varying sizes of work pieces • Robust, steel construction • Self-retracting hydraulic piston • Sturdy frame structure with holes for adjustment of the anvil table • Delivery includes anvil table / V-suspension / pressure gauge • With perforated shelf on press table for storage of press bolts. • Set of 3 press punches and 1 quick change chuck for punches not included but available as extra accessory
Model WPSK 15 FP and WPSK 30 FP with pneumatic-hydraulic pump with foot switch (pedal) allows fast operation and hands-free operation in order to be able to hold and control the work piece when pressing
WPB 15 HM Hydraulic Press, short version for use on workshop bench With manual hydraulic pump • Piston with threaded extention 75 mm for fast adaptation to smaller clearances due to varying sizes of work pieces • Robust, steel construction • Self-retracting hydraulic piston • Sturdy frame structure with holes for adjustment of the anvil table • Delivery includes anvil table / V-suspension / pressure gauge • With perforated shelf on press table for storage of press bolts. • Set of 3 press punches and 1 quick change chuck for punches not included but available as extra accessory model
Model WPSK 30 HM with two manual pumps WPSK 30 HM (fast approach, powerful pressing) model
WPSK 15 HM
article no.
article no. 15 HM (15 t) 30 HM (30 t) 15 FP (15 t) 30 FP (30 t)
8951087152 8951087302 8951087151 8951087301
for technical specifications see page 21
WPB 15 HM 8951087150
Quick-Exchange Chuck, individual
WPSK WPSK WPSK WPSK
Press Punches, individual
Quick exchange chucks for press punches for RODCRAFT presses WPB... and WPS... m 10 m
m 19 m
m 24 m
Press punches for SWAM 15 and SWAM 30-50 model
article no.
15 t SWAM 15 8951011058 30-50 t SWAM 30-50 8951011059
10 mm 19 mm 24 mm
model DO 10 DO 19 DO 24
article no. 8951011053 8951011054 8951011055
Sets of Press Bolts with Quick-Exchange Chuck mm 30,5
mm 30,5
mm 30,5
Set of 1 quick-exchange chuck and 3 press bolts (10 / 19 / 24 mm) for presses 15 t / for presses 30 - 50 t model 15 t 30 t/50 t
m 10 m
m 19 m
article no.
SWAM 15+DO 8951011060 SWAM 30-50+DO 8951011061
m 24 m
22
:66LQGG
Workshop Presses www.rodcraft.com
Slim Presses up to 30 t, Large Presses up to 50 t, manual with air-hydraulic pump support manual with air-hydraulic pump support Hydraulic Workshop Press With air-hydraulic pump and additional manual hydraulic pump • Piston with threaded extention 75 mm for fast adaptation to smaller clearances due to varying sizes of work pieces • Robust, steel construction • Self-retracting hydraulic piston • Sturdy frame structure with holes for adjustment of the anvil table • Delivery includes anvil table (can beifted by winch) / V-suspension / pressure gauge • Cylinder can be shifted sideways by 250 mm for precise positioning even on asymmetric work pieces • With perforated shelf on press table for storage of press bolts. • Set of 3 press punches and 1 quick change chuck for punches not included but available as extra accessory
model WPS WPS WPS WPS
Models HPV: with hand activated, air-hydraulic pump for fast hydraulic power without effort Models FPV: with foot activated, air-hydraulic pump for fast hydraulic power without effort - the hands are free to help positioning the work piece All presses are additionally equipped with a manual pump for precise low press applications.
WPSK 30 FP
with pedal-activated air-hydraulic pump
Capacity
article no. HPV FPV HPV FPV
8951087300 8951087303 8951087500 8951087501
WPS 50 FPV
with pedal-activated air-hydraulic pump
description
dimens. [mm]
30 30 50 50
WPB15HM
WPSK15HM WPSK15FP
WPSK30HM WPSK30FP
WPS30HPV WPS30FPV
WPS50HPV WPS50FPV
[t]
15
15
30
30
50
A
ZLGWK
[mm]
605
605
670
880
880
B
OHQJWKIRRW
[mm]
420
650
650
650
650
C
KHLJKW
[mm]
940
1650
1750
1770
1810
D
VSDFHLQIUDPH
[mm]
120
120
120
145
145
E
VSDFHLQIUDPH
[mm]
500
500
550
710
710
G1
PLQGLVWDQFHWDEOH
[mm]
150
150
180
145
145
G2
PD[GLVWDQFHWDEOH
[mm]
450
600
630
600
600
R1
K\GUDXOLFVWURNH
[mm]
95
95
120
120
120
R2
WKUHDGHGH[WHQVLRQ
[mm]
75
75
75
75
75
R
VWURNHH[WHQVLRQ
[mm]
170
170
195
195
195
M
VKLIWLQJVLGHZD\V
[mm]
--
--
--
250
250
0,75
1,1
1,1
1,1
1,1
77
89
137
202
220
Völ
RLO
G
ZHLJKW
air supply pressure: 7 bar
[l] [kg]
air consumption: 270 l/min
air inlet thread: 1/4“ male thread
23
:66LQGG
Accessories
02 02
article no.
model
8951089071 8951089072 8951089073
MGM 3L K+H chain 1,4 m with 2 hooks safety chain 1,4 m DIN EN 818T2 1500kg SIK safety hook SIH
8951011048 8951011049 8951011050 8951011032*
AK3-SFL5 AK3-SFL6 AK3-SFL8 AK-5/0,9 F
8951011044 8951011028* 8951011045 8951011043 8951011029*
AK-3ADB AK-5 A1 AK-3ABMW AK-3AVW AK-5 SA
03 03
04 04
01 01 29 29 21 21
05 05
10 10
07 07
06 06
08 08 11 11
09 09 13 13 12 12
14 14
16 16 18 18
19 19 23 23
25 25 15 15
22 22
17 17
20 20 24 24 28 28
26 26
27 27
description
nozzle/tube, nozzle/tube, nozzle/tube, nozzle/tube,
5 6 8 5
mm mm mm mm
for model
flexible flexible flexible flexible
MGM 3L MGM 1, MGM 3L, MP 500 MGM 1, MGM 3L, MP 500
AK02, AK03, AK05, TK09B, TK09BL AK02, AK03, AK05, TK09B, TK09BL AK02, AK03, AK05, TK09B, TK09BL AK02, AK03, AK05, TK09B, TK09BL
adapter for Mercedes Ø 16,0 mm AK03 adapter for Mercedes / Volkswagen Ø 16,0 mm AK02, AK03, AK05, TK09B, TK09BL adapter for BMW Ø 12,3 mm AK02, AK03, AK05, TK09B, TK09BL adapter Volkswagen-Golf Ø 5,4 mm AK02, AK03, AK05, TK09B, TK09BL adapter for female socket of nozzles/tubes TK09B,TK09BL
pos.
article no.
model
description
01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29
8951012036 8951012037 8951012038 8951011980 8951012039 8951012040 8951012041 8951012042 8951012043 8951012044 8951012045 8951012046 8951012047 8951012048 8951012049 8951012050 8951012051 8951012052 8951012053 8951012054 8951012062 8951012055 8951012056 8951012063 8951012057 8951012058 8951012059 8951012060 8951089080 8951011993 8951011994
10-01 10-02 10-03 111 04 10-05 10-06 10-07 10-08 10-09 10-10 10-11 10-12 10-13 10-14 10-15 10-16 10-17 10-18 10-19 10-20 10-21B 10-22 10-23 10-24B 10-25 10-26 10-27 10-28 HRZ05B R 1115 P 21
HPP 10 hand pump, 2-step hose and coupling push ram 10 t spreader 0,5 t extension pipe 635 mm extension pipe 508 mm extension pipe 254 mm extension pipe 127 mm thread piece, outer thread plate prisma piec wedge piece, sharp push foot for piston push foot for cylinder rubber Ø 83 mm thread piece, inner thread length 53 mm protection for piston bolt pull ring pull hook pipe holder for hydraulic ram pipe holder for cylinder spring spreader toe chain piece, yoke push foot for piston, reinforced pull clamp pull clamp chain with one hook pull cylinder 5 t, chromed coupling for cylinder or spreader nipple for high pressure hose
for model
24
:66LQGG
Accessories www.rodcraft.com
03 02
03 01 04
10
14
16
09 11
15 12
13
pos.
article no.
model
01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17
8951011997 8951011998 8951012011 8951011980 8951011999 8951012000 8951012001 8951012002 8951012003 8951012004 8951012005 8951012006 8951012007 8951012008 8951012012 8951012009 8951012010 8951011993 8951011994
110 01 110 02 110 03C 111 04 110 05 110 06 110 07 110 08 110 09 110 10 110 11 110 12 110 13 110 14 110 15C 110 16 110 17 R 1115 P 21
pump, hydraulic 1-step, 4 t HRS 04 high pressure hose 1500 mm push ram 4 t spreader 0,5 t extension pipe 400 mm extension pipe 300 mm extension pipe 200 mm extension pipe 100 mm adapter pipe protection piece plate prisma piece wedge piece, sharp push foot piston push foot cylinder rubber tool box coupling for cylinder or spreader (1/4”AG) nipple for high pressure hose
01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17
8951011978 8951011979 8951011995 8951011980 8951011981 8951011982 8951011983 8951011984 8951011985 8951011986 8951011987 8951011988 8951011989 8951011990 8951011996 8951011991 8951011992 8951011993 8951011994
111 01 111 02 111 03D 111 04 111 05 111 06 111 07 111 08 111 09 111 10 111 11 111 12 111 13 111 14 111 15D 111 16 111 17 R 11 15 P 21
pump, hydraulic 1-step, 10 t HRS 10 high pressure hose 1500 mm push ram 10 t (1/4“ NPT ram-coupling) spreader 0,5 t extension pipe 483 mm extension pipe 355 mm extension pipe 255 mm extension pipe 127 mm adapter pipe protection piece plate prisma piece wedge piece, sharp push foot piston push foot cylinder rubber tool box coupling on ram (1/4“ AG) nipple for high pressure hose
05 06
description
for model
07 08
17
16 02
01 17
12
03 05
04 14
13
15
06 08 07
09
10
11
pos.
article no.
model
description
for model
01 (A) 02 (B)
8951012013
112 01
pump, hydraulic 2-step
HRS 20
8951012014
112 02
push ram 20 t (3/8“ NPT ram-coupling)
03 (C)
8951012015
112 03
extension pipe 700 mm
04 (C)
8951012016
112 04
extension pipe 500 mm
05 (C)
8951012017
112 05
extension pipe 250 mm
06 (C)
8951012018
112 06
extension pipe 125 mm
07 (B)
8951012019
112 07
lock pin
08 (B)
8951012020
112 08
connector, male thread
09 (B)
8951012021
112 09
connector, female thread
10 (A)
8951012022
112 010
plunger base
11 (A)
8951012023
112 011
ram base
12 (B)
8951012024
112 012
toe lift
13 (B)
8951012025
112 013
V-head
14 (B)
8951012026
112 014
wedge head
15 (B)
8951012027
112 015
serrated saddle
17 (A)
8951012029
112 017
high pressure hose
25
:66LQGG
Addresses
RODCRAFT in Central Europe
Sales
Service
Germany
RODCRAFT Central Europe Langemarckstraße 35 45141 Essen Germany phone: +49 (0)201 21 77 781 +49 (0)201 21 77 788 fax:
[email protected] email:
Rodcraft Service Center W. Valentin GmbH & Co. KG Gewerbeschulstraße 99 – 103 42289 Wuppertal Germany +49 (0)202 25 59 8-0 phone: +49 (0)202 25 59 8-19 fax:
[email protected] email:
Austria
RODCRAFT Central Europe Langemarckstraße 35 45141 Essen Germany +49 (0)201 21 77 781 phone: +49 (0)201 21 77 788 fax:
[email protected] email:
Rodcraft Service Center Pixner GmbH & Co KG Robingstr. 9a A-5020 Salzburg Austria (0662) 88920-0 phone: (0662) 88920-28 fax:
[email protected] email:
Switzerland
RODCRAFT Central Europe Langemarckstraße 35 45141 Essen Germany +49 (0)201 21 77 781 phone: +49 (0)201 21 77 788 fax:
[email protected] email:
Rodcraft Service Center Intool AG Hinterbergstrasse 30 CH- 6330 Cham Switzerland +41 (0)41 748 07 00 phone: +41 (0)41 748 07 01 fax:
[email protected] email:
Belgium
RODCRAFT Central Europe Langemarckstraße 35 45141 Essen Germany 0 800 791 27 * phone: 0 800 763 75 * fax:
[email protected] email:
RODCRAFT Service Center Industrielaan 44 BE-3730 Hoeselt Belgium 0 800 791 28 * phone: 0 800 791 33 * fax:
[email protected] email:
Netherlands
RODCRAFT Central Europe Langemarckstraße 35 45141 Essen Germany 0 800 02 21 610 ** phone: 0 800 02 21 709 ** fax:
[email protected] email:
RODCRAFT Service Center Industrielaan 44 BE-3730 Hoeselt Belgium 0800 02 21 571 ** phone: 0800 02 21 724 ** fax:
[email protected] email:
Luxemburg
RODCRAFT Central Europe Langemarckstraße 35 45141 Essen Germany +49 (0)208 21 77 729 phone: +49 (0)208 21 77 792 fax:
[email protected] email:
RODCRAFT Service Center Industrielaan 44 BE-3730 Hoeselt Belgium +32 89 51 07 86 phone: +32 89 51 07 89 fax:
[email protected] email:
France
RODCRAFT France 38 rue Bobby Sands, ZAC de la Lorie BP10273 44818 SAINT HERBLAIN CEDEX France +33 (0)240 808 909 phone: +33 (0)240 80 20 19 fax:
[email protected] email:
RODCRAFT Service Après Vente ARM 57, route de Bray 77130 Marolles-sur-Seine France 01 64 31 24 36 phone: 01 60 96 76 06 fax:
[email protected] email:
Italy
RODCRAFT Italy Viale della Repubblica, 65 20851 Lissone (Milano) Italy +39-0 10 5 76 52 70 phone: +39-0 10 5 76 53 35 fax:
[email protected] email:
RODCRAFT Servizio Clienti Homberger SPA Via Ippolito d'aste, 1/1 16121 Genova (GE) Italy +39-0 10 5 76 52 70 phone: +39-0 10 5 76 53 35 fax:
[email protected] email:
Spain
RODCRAFT Spain Avenida Industria, 9, Polígono Industrial Alcobendas 28100 Alcobendas Spain +34 91 590 31 52 phone: +34 91 590 31 61 fax:
RODCRAFT in South West Europe
Portugal
RODCRAFT Portugal Avenida Industria, 9, Polígono Industrial Alcobendas 28100 Alcobendas Spain phone: +34 91 590 31 52 fax: +34 91 590 31 61
* number valid from and in Belgium ** number valid from and in the Netherlands
26
:66LQGG
Addresses www.rodcraft.com RODCRAFT in Eastern Europe Albania, Bosnia, Herzigovina, Bulgaria, Croatia, Hungaria, Macedonia, Montenegro, Romania, Serbia, Slovakia, Slovenia
RODCRAFT Eastern Europe Chemická 4 831 04 Bratislava Slovakia +421 264 462 636 phone: +421 264 463 464 fax:
[email protected] email:
RODCRAFT in the UK and Ireland United Kingdom, Ireland
Poland
phone: fax: email:
+48 22 720 96 10 +48 22 720 96 15
[email protected]
Czechia
phone: fax: email:
+420 225 434 152 +420 225 434 131
[email protected]
RODCRAFT in Nordic
RODCRAFT UK 37 Mark Road, Hemel Hempstead Herts United Kingdom phone: +44 (0)1442 838 999 fax: +44 (0)1442 838 989 email:
[email protected]
Denmark, Finland, Iceland, Norway, Sweden, Estonia, Lithuania, Latvia
RODCRAFT Nordic Kville 18 SE-450 Fjällbacka Sweden +46 (0) 525 352 55 phone: +46 (0) 525 350 93 fax:
RODCRAFT in Russia
RODCRAFT in the Middle East
Belarus, Russia, Ukraine
Middle East
RODCRAFT Russia 15, Vashutinskoe road Khimki, Moscow region 141402 Russia +7 495 933 5553 phone +7 495 933 5557 fax:
RODCRAFT in South Africa
RODCRAFT in India India
RODCRAFT India 2nd Floor, RUSHABH, Near American Heart Institute Ghodbunder Rd Manpada, THANE (West) - 400607 India +91 22 39 98 27 31 phone: +91 98 33 48 91 64 +91 22 39 98 27 25 fax:
A broad range of products for garages, industry and craftsmen
RODCRAFT Middle East P.O. Box 122778, Plot 368/471, Warehouse No. 2, Hasa Road, Street 8, Al Quoz Industrial Area 3 Dubai United Arab Emirates +9714 7040271 phone: +971 50 6610828 +9714 7040294 fax:
South Africa
www.rodcraft.com
www.rodcraft.com
Druckluftwerkzeuge
Qualität Technik Service
Air tools and accessory
RODCRAFT South Africa Hughes Business Park, Saligna Street, Witfield, Gauteng, 1459 South Africa +27(0) 11 437 6932 phone: +27(0) 11 437 6933 +27(0) 11 388 1672 fax:
Werkstatt-Ausstattung
Qualität Technik Service
Workshop cranes, hydr. presses, jacks, oil service tools etc.
For fast information, news, downloads of product information, spare part information, manuals.
www.rodcraft.com © RODCRAFT 20111215 T.G. RODCRAFT follows a policy of continuous product improvement. Specifications and descriptions are thus subject to change without notice. Check the online ecatalogue at www.rodcraft.com for the latest product information.
5&.:6SDJHLQGG
27
Hydraulic Cranes Bottle Jacks
Presses
Pumps Oil Service
Jack Stands Battery Booster
Transmission Jacks Motor Positioner Trolley Jacks Motor Bridges
Accessories
Hydraulic Ram Cylinders Your Dealer
order no. 8956010006 - KWSE
2012-01