Transcript
WSP-i450 Mobile thermal printer
● Rugged design ● Support text and graphic printing ● Mild (596g) ● UART (RS-232C or TTL), Bluetooth Ver3.0, USB, WiFi ● High resolution (203dpi : 8 points /mm)
Version 0.1
Summary Introduction...................................................................................................3 Operating precautions :.................................................................................4 Specifications :..............................................................................................5 Setting up the printer :..................................................................................6 Printer features :............................................................................................7 Dimensions :.................................................................................................8 Replacing the paper roll:...............................................................................9 Control panel :............................................................................................10 Set operation mode :...................................................................................11 Interface :....................................................................................................14 The self-test :..............................................................................................15 Using belt-clip :..........................................................................................15 Consumable parts :......................................................................................16
Doc WSP-i450
2
Introduction → The WSP-i450 is the perfect partner in application such as mobile bank system, retail, point of sales, credit card transaction, other travelling and mobile computing, etc...
→ General features :
3
➢
Compact size (150 x 136.4 x 63.3 mm)
➢
Light weight (596 g)
➢
Very silent printing through direct thermal printing method.
➢
High speed (110 mm /sec, MAX)
➢
High resolution (203dpi, 8 dots /mm)
➢
UART(RS-232C or TTL), Bluetooth Ver3.0, USB [option], Wireless LAN (IEEE802.11b/g) [option] interface.
➢
Support graphic LCD (128 x 32 dots) with blue LED backlight.
➢
Support Magnetic Stripe Reader (MSR). [option]
➢
Smart card technology.
➢
Support text and graphic printing.
➢
Intuitive LED’s indicate Power(on/off), Error.
➢
Easier paper roll loading by CLAMSHELL design.
➢
One touch paper cover.
➢
Printer door open & paper out sensor.
➢
Easier maintenance with self-diagnostic.
➢
Water resistant (IP54).
➢
Microsoft Windows XP/VISTA/7/8/CE, Linux, Android OS compatible
➢
Free fall: 1.8m drop resistance.
Doc WSP-i450
Operating precautions : → Please follow the precautions below to enjoy and maintain the full performance of the printer.
Using the printer : •
Be careful not to drop or bump the printer on a hard surface;
•
Do not install the printer in direct sunlight or such areas. Suitable environment for the use of the printer is as follows: Operating temperature : -10°c à 50°C Relative humidity : 30 % et 80 %
•
Do not install the printer near devices that generate strong electromagnetic fields such as a copy machine.
•
Do not open platen cover during printing.
•
Do not remove or reinstall the communication cable during printing or transmission.
•
Do not touch the connectors of the communication cable during printing.
•
Switch the POWER OFF when not in use.
•
Do not use other solvent.
•
The AC adapter, the battery charger and the battery pack may become warm when in use. This is normal and is not a malfunction.
•
When the battery pack is used at low temperature, the length of time the printer can be used may be shortened.
Thermal paper handling : •
Store the thermal paper in a cool, dry and dark place.
•
Do not rub the paper with hard object.
•
Do not allow plastic film, erasers, or adhesive tape to touch the paper for long periods.
•
Do not use chemical glue.
•
Always use the clean thermal paper.
Doc WSP-i450
4
Specifications : Item
Specifications
Printing method
Direct thermal line printing
Characters per line
Font A :69cpl / B:92cpl / C:104cpl KOR,CHN,JPN:34cpl
Character size
A: 12x24 / B : 9x24 / C : 8x16 KOR:24x24(16x24) / CHN,JPN: 24x24
Resolution
203dpi, 8 dots /mm
Optional font
Alphanumeric95, extended graphic: 128x50 pages, International 10, Traditional/simplified Chinese, Japanese, Korean and other upon request
Printing width
4 inches (104mm, 832 dots)
Printing speed
110 mm /sec (MAX)
Dimensions
150 x 136.4 x 63.3 mm
Weight (with battery)
596g / 609g (MSR)
Interface
UART (RS-232C ou TTL), Bluetooth Ver3.0, USB [option], Wireless Lan interface (IEEE802.11b/g) [option]
Paper
Thermal roll paper (113mm wide, 50Ø)
Barcodes
1-D : UPC-A, UPC-E, EAN-8, EAN-13, CODE-39, CODE-93, CODE-128, ITF, CODABAR 2-D : PDF417, Micro PDF417, Truncated PDF417, QR CODE, DATA Matrix, Maxicode
Driver
Microsoft Windows XP / VISTA / 7 / 8 /CE Linux, Android OS driver compatible
H/W spec.
MCU : RX-32Bit, FLASH : 64M bytes, RAM : 128M bytes
Receive buffer size
1M bytes
MSR [option]
ISO 7810 / 7811 / 7812 1&2 &3 tracks reading
Module Smart Card
ISO 7816 Compliant (EMV level 1 certified) T=0, T=1 / 1 SAM (Security Application Module)
LCD
128 x 32 dots FSTN (Blue LED backlight)
5
Doc WSP-i450
Battery
Rechargeable, 7.4V DC, 2200 mAh (Li-ion)
Battery duration
1 hour of continuous printing
Battery charger
Input (100~250V AC, 50~60Hz) Output (8.4VDC/0.8A), 4 hours full time charge
Environmental conditions
Temperature : -20°C ~ 55°C (operating) -20°C ~ 70°C (storage) Humidity : 30 % - 80 % (operating) 10 % - 90 % (storage)
MCBF (Mean Cycle Before Failure)
Mechanical : 37.000.000 lines Head : Approximatively 50km
Setting up the printer : a) Printer & accessories
→ Your printer should include these items. If any items are damaged or missing, please contact your dealer for assistance. Box contents : •
Printer WSP-i450 :
•
Thermal Roll Paper :
•
Communication cable :
•
Battery pack :
•
Battery charger adaptor :
•
Belt-clip:
Doc WSP-i450
6
Optional accessories: •
MSR:
•
Shoulder strap:
•
Car charger:
•
SAM:
•
Smart Card:
•
Battery external cradle:
Printer features :
7
Doc WSP-i450
Dimensions :
Doc WSP-i450
8
Replacing the paper roll: Note : → Be sure to use paper rolls that meet the specifications. → Do not use paper rolls that have the paper glued to the core because the printer can not detect the paper end correctly. Steps to follow: →Make sure that the printer is not receiving data; otherwise, data may be lost. → Remove the used paper roll (if there is one) → Install the paper roll as shown below : 1) – Open the paper cover by pressing the open switch:
2) – Insert the paper roll as shown:
3) – Tear the excess paper off using the edge of paper door as a tear bar :
9
Doc WSP-i450
Control panel :
•
Buttons : → FEED : Use FEED button to feed the paper continuously. → POWER : This button is used to power ON/OFF. You need to press it around 5 seconds to switch ON or OFF the printer.
•
Lamps: → POWER (green) : The printer is on and ready to receive data. → ERROR (red) : Indicates a fault condition or a printer error (no paper, paper cover open, etc...).
•
LCD: → The LCD screen will display most of the printer status (connection type, end of paper, etc...)
Doc WSP-i450
10
Set operation mode : → To switch on operation mode, press the FEED and POWER button simultaneously. Then from this moment, the ERROR lamp blink. You need to keep pressing on the FEED and POWER button until the ERROR lamp blink for 5 times. Then you are now in the operation mode.
→The menu navigation in operation mode is done as: POWER button: Used for changing OPTION status of a mode. FEED button: Used to switch from one MODE to another.
11
Doc WSP-i450
→ The WSP-i350 present the following modes and options :
Mode
Options UART (RS-232C) Protocol UART (RS-232C)
Communication type
Bluetooth Protocol Bluetooth Bluetooth (iAP) 9600 bps 19200 bps
Baud rate
38400 bps 57600 bps 115200 bps 7 DATA bits
Data bit
8 DATA bits No parity
Parity bit
Odd parity Even parity 1 Stop bit
Stop bit
2 Stop bit Low Medium
Density
High High +1 High +2 Low
Quality
High
Doc WSP-i450
12
No use Use
Mark
Gap/hole Use (BACK) Low Medium 1
Sensor
Medium 2 High No use 1 minutes Sleep 2 minutes Sleep 3 minutes Sleep 4 minutes Sleep
Power down
5 minutes Sleep 1 minutes Off 2 minutes Off 3 minutes Off 4 minutes Off 5 minutes Off
To leave the operation mode, press simultaneously on the FEED and POWER button again.
Note :
→ When you will leave the operation mode, the printer will print a ticket with her setting on.
13
Doc WSP-i450
Interface : a) UART(RS-232C or TTL) / USB interface
→ The WSP-i450 printer has a UART/USB interface and is connected by a means of 5 pin mini USB socket. In the following table, the signal present on the miniUSB socket are listed : USB:
N° pin
Name
Function
1
VCC
+5V
2
DM
DATA « - »
3
DP
DATA « + »
4
NC.
-
5
GND
Ground
UART (RS-232C or TTL):
N° pin
Name
Direction
Function
1
TxD
Output
Transmit data
2
RxD
Input
Receive data
3
CTS
-
-
4
NC.
-
-
5
GND
-
Ground
Doc WSP-i450
14
The self-test : → The self-test prints out the current setting value of printer. The way of self-test is as follows: 1.
Insert proper paper into the printer.
2.
Power on while pressing FEED button to start self-test.
3.
The printer will print out her current settings (ROM version and communication mode).
4.
And then a pattern of characters will be printed out.
5.
The self-test will be finished automatically and turned to the standby status.
Using belt-clip :
→ Insert belt-clip in the hole and screw it with a screwdriver or a coin.
15
Doc WSP-i450
Consumable parts : a) Recommended paper •
Type
: Thermal paper.
•
Paper width
: 113mm
•
Paper thickness
: 60 + 5μm
•
Outer diameter
: Ø50 mm or less.
•
Recording side
: Outside of the roll.
Caution 1) – Do not paste the paper to the core, and the roll paper which has near end mark printing on its near end is recommended. 2) – C hemicals or oil may change the color of paper, or printed characters may fade. 3) – Change of paper color starts from approximatively 70°C. 4) – Color of paper may be changed by being scratched with a nail or hard metal, etc…
Doc WSP-i450
16
Printing position :
17
Doc WSP-i450
Doc WSP-i450
18
19
Doc WSP-i450
Potentiomètres de précision
Centre de production
Résistances de précision
et Bureaux Commerciaux
Servo-Systèmes Capteurs Interfaçage Systèmes d'impression Joysticks-Trackballs
MEGATRON 451 route des Blaves Z.I. de Noyer F- 74200 ALLINGES Tél: +33 (0) 4.50.70.54.54 - Fax: +33 (0) 4.50.70.56.56 Internet: http://www.megatron.fr - E-mail:
[email protected]
