Transcript
Deployable Optical Products for Outside Broadcast
BN367
3G-SDI, Talkback Audio, Duplex Data
Expanding upon the successful BlueNano range the BN367 is designed for the cost effective transport of signals to/from a remote camera position over fibre. Based around field proven technology the rugged units provide the transport of SDI, audio and duplex data signals over a dual fibre link. The BN367 is ideally suited for use with a range of ultra slow motion POV cameras. Supplied in a robust aluminium enclosure with Lemo 3k93C connectors fitted as standard the BN367 is designed for the rigours of Outside Broadcast applications. (Alternative connectors are easily supplied.)
Power is provided via the compact PS12 unit. Each BN367 has a 4 pin XLR allowing the freedom to provide power from a variety of external DC sources in the range 4.5 to 17 V. Units can be used in conjunction with any standard Bluebell frame or enclosure allowing a remote BN367T in the field to integrate easily with a 19” frame in the OB truck.
E&OE May 2015
www.bluebell.tv
Each signal within a fibre core has a different optical wavelength, enabling interference free transmission over longer distances.
BN367
3G-SDI, Talkback Audio, Duplex Data
Specifications BN367T Standards
General specifications
Connector Return Loss Format
Electrical Input Video SMPTE 424M, SMPTE 292M, SMPTE 259M, SMPTE 297M, DVB-ASI Automatic to 100 m @ 3 Gb/s Automatic to 200 m @ 1.485 Gb/s Automatic to 300 m @ 270 Mb/s 2 x 75 Ohm BNC to IEC 60169-8 Amendment 2 > 15 dB @ 1.485 Gb/s Reclocked
BN367T Connector
Optical Input/Output 1 x Lemo 3k93C Panel Socket
BN367R Connector
Optical Input/Output 1 x Lemo 3k93C Panel Plug
Wavelength Optical Power Sensitivity Max I/P power
1310 nm, 1550 nm muxed onto each fibre -3 dBm @ 1310 nm (typical) > -22 dBm @ 3 Gb/s (typical) > -1 dBm
Conformance EMI/RFI: Complies with 89/336/EEC, EN55022B, EN61000-4-2, EN61000-4-4-(Level 2), EN61000-4-4FTB, EN61000-4-5, EN61000-4-11 Electrical: Complies with EN61000-6-1, EN61000-6-2, EN61000-6-3, EN61000-6-4 Laser Safety: Dependent on SFP fitted. Complies with Class 1 laser product RoHS: Complies with Directive 2002/95/EC Warranty 5 years
BN367R Standards
Electrical Output Video SMPTE 424M, SMPTE 292M, SMPTE 259M, SMPTE 297M, DVB-ASI Automatic rate selection for 3G-SDI, HD-SDI and SD-SDI data rates. 2 x 75 Ohm BNC to IEC 60169-8 Amendment 2 > 15 dB @ 1.485 Gb/s 800 mV +/- 10% 0 +/- 0.5 V <0.15 UI line equalised Reclocked
Equalisation
Connector Return Loss Signal Level DC Offset Jitter Format
Electrical Input/Output Audio and Data Connector 44 pin D type Format 2 x analogue audio1, 20 Hz– 20 kHz 2 x RS232 2 x RS422/485 2 x GPI
± 0.3 dB Duplex Duplex Duplex
Length Width Height Weight Operating Temp Power Voltage
(excluding connectors) BN367T BN367R 134 mm 134 mm 109 mm 109 mm 30 mm 45 mm 200 g 0 -30 to +70 C 2.5 W 4.5 to 17 V dc
End view showing BNC & Audio, Data I/O
End view showing 4 pin power XLR & Lemo 3k93C
Ordering Information BN367T/S/L3K
BN367R/S/L3K
Singlemode Dual Channel 3G/SDI, HD/SDI Fibre Optic Transmitter Module, Auto-Sensing for SDI, ASI, HD/SDI and 3G/SDI. Also provides 2 x analogue audio in each direction plus duplex RS data. PS12 power supply ordered separately. Singlemode Dual Channel 3G/SDI, HD/SDI Fibre Optic receiver Module, Auto-Sensing for SDI, ASI, HD/SDI and 3G/SDI. Also provides 2 x analogue audio in each direction plus duplex RS data. PS12 power supply ordered separately. Fitted with Lemo 3K SMPTE connectors as standard. Contact the Sales Office for alternatives. Note audio is designed for talkback system - bandwidth 20 Hz - 20 kHz with amplitude restricted to +6 dBu. Supplied with mating D type connector parts.
1
Bluebell Opticom Limited Unit 2 The Quadrant Howarth Road Maidenhead Berks SL6 1AP Tel: +44 (0) 1628 510055 Fax: +44 (0)1628 510057 Email:
[email protected] Website: www.bluebell.tv
