Transcript
www.canford.co.uk
CRIMP DIE SELECTION CHART These die-sets are compatible with either ERMA or PALADIN coaxial crimping tools. Many dies may be suitable for more than one cable group. NOTE: Although Telegartner (TG) and Amphenol BNC HD connectors are completely compatible with various Canford and Belden cables, the die-sets used for standard BNC connectors for the same cable group are unsuitable. Telegartner and Amphenol BNC HD connectors MUST be assembled with the crimp die-sets shown below. NOTE: Specific tools are stocked for Canare and Neutrik BNC HD connectors, and these are shown with the connectors concerned. These die set sizes are chosen to suit only specific connectors stocked by Canford, and may not be suitable for similar types, even from the same manufacturer. Canford Cable Group ERMA Canford Code Canford Code die set for die set for die set reference for Erma (1) for Paladin (2) A 29277 55-807 B 29272 55-806 55-761 D 29271 55-813 55-761 E 29422 55-808 G 29271 55-813 55-761 H 29273 55-815 J 29271 55-813 55-761 J (Telegartner BNC HD) 55-803 55-765 L 29423 55-809 N 29260 55-812 55-763 Q 29272 55-806 55-761 Q (Telegartner BNC HD) 55-805 55-764 V 29271 55-813 55-761 X 29271 55-813 55-761 X (TG/Amphenol BNC HD) 55-817 55-764 X (Canford MUSA HD) 29295 55-816 Y (Including TG BNC HD) 29260 55-812 55-763 / 55-764 Y (Amphenol BNC HD) 55-768 Z (Including TG BNC HD) 29207 55-804 55-762 / 55-765 Note (1) Dies fit Erma crimp tool, stock code 55-800. Note (2) Dies fit Paladin 1300 and 8000 series tools, including Paladin 1302 (stock code 55-751) and Paladin 1800 (55-752) coaxial crimp tools.
UK Sales - tel 0191 418 1122 fax 0191 418 1123
[email protected]
International Sales - tel +44 191 418 1133 fax +44 191 418 1134
[email protected]
Tech Support - tel 0191 418 1144 fax 0191 418 1145
[email protected]
