Www.esbsistemas.com Www.ecomodelsite.com 1 Dual

Transcript

Dual-Band Tri-Sector Antenna Tri-sector Antenna Half Power Beam Width 65º 65º Kathrein 12-Port 698-960/1710-2690 65/65º 17/18.5 1.5º-10º/2º-8ºT Low Band 698-960 Frequency Range (Mhz) 698-806 790-862 824-894 880-960 16 16.6 16.9 17.1 16.0 ± 0.5 16.5 ± 0.4 16.8 ± 0.4 17.0 ± 0.2 Azimuth Beeamwidth (º) 71 ± 2.2 68 ± 1.0 68 ± 0.9 67 ± 1.5 Front to Back Ratio, Total Power ± 30º (dB) > 22 > 24 > 26 > 27 Cross Polar Discrimination at Boresight (dB) > 23 > 22 > 22 > 21 Cross Polar Discrimination over sector (dB) > 8.0 > 8.5 > 9.5 > 8.5 8.4 ± 0.7 7.7 ± 0.4 Gain at mid tilt (dBi) Gain over all tilts (dBi) Horizontal Pattern Vertical Pattern Elevation Beamwidth (º) Electrical Downtilt continuously adjustable 7.0 ± 0.3 7.5 ± 0.4 1.5 - 10.0, continuously adjustable Tilt Accuracy < 0.3 < 0.3 < 0.3 < 0.3 First Upper Side Lobe Supression (dB) > 16 > 17 > 16 > 15 Upper Side Lobe Suppression, 20º Sector above Main Beam (dB) > 16 > 17 > 16 > 15 Cross Polar Isolation (dB) > 30 Port to Port Isolation > 30 dB (R1//Y1) Max Effective power per Port 400W (at 50ºC ambient temperature) Max Effective power Port 1 - 2 800W (at 50ºC ambient temperature) Electrical data per sector. Electrical datas shown in this dataseet is subjet to change w/o previous notice. Values based on ngmn-P-BASTA requirements. Electrical specifications Impedance ( Ω ) High Band 1710-2690 Frequency Range (Mhz) Gain at mid tilt (dBi) Gain over all tilts (dBi) Front to Back Ratio, Total Power ± 30º (dB) Cross Polar Discrimination at Boresight (dB) Cross Polar Discrimination over sector (dB) 1920 - 2170 2300 - 2400 2490 - 2690 18 18.5 18.8 18.6 19 Interband Isolation (dB) >30 18.0 ± 0.4 18.5 ± 0.4 18.7 ± 0.4 18.5 ± 0.7 18.8 ± 0.4 Passive Intermodulation <-150 dBc(2x43 dBm) 64 ± 3.4 62 ± 2.9 62 ± 2.2 60 ± 4.8 60 ± 2.0 > 25 > 26 > 27 > 25 > 26 Polarization (º) > 15 > 18 > 20 > 16 > 21 Input > 11.0 > 11.0 > 10.0 > 9.5 Adjustment Mechanism 5.0 ± 0.4 4.7 ± 0.2 First Upper Side Lobe Supression (dB) Upper Side Lobe Suppression, 20º Sector above Main Beam (dB) Cross Polar Isolation (dB) Port to Port Isolation 4.4 ± 0.4 Antenna Weight 3.9 ± 0.2 2.0 - 8.0, continuously adjustable Service Area Weight Colour < 0.2 < 0.2 < 0.2 < 0.2 < 0.2 > 19 > 18 > 20 > 20 > 18 > 16 > 16 > 16 > 16 > 17 > 28 Nominal Separation Between Sectors Individual Sector Azimuth Adjust. Max Wind Velocity Windload at 165 km/h > 30 dB (R1//Y1) Max Effective power per Port 200W (at 50ºC ambient temperature) Max Effective power Port 1 - 2 400W (at 50ºC ambient temperature) POWERED BY: 3.5 ± 0.2 www.esbsistemas.com www.ecomodelsite.com ± 45 Mechanical Specifications > 8.0 Electrical Downtilt continuously adjustable Tilt Accuracy >14 1850 - 1990 Vertical Pattern Elevation Beamwidth (º) < 1.5 Return Loss (dB) 1710 - 1880 Horizontal Pattern Azimuth Beeamwidth (º) 50 VSWR Antenna height/diameter Service Area height 12 x 7-16 female External RCU 135 kg 60 kg RAL 7042 0º / 120º / 240º ± 10º 165 km/h 1157N 2685 / 550 mm 750 / 566 mm 1 General Information Service area (ECOSA75V02) The Service Area is supplied as a separated module and allows easy and safe accessto the settings of the antenna. The Azimuth can be adjusted independently per sector into the range described in the datasheet. The tilt range shall be set according to Kathrein Werke recommendations. The Service area is valid for RCUs, DTMA and Mux installation. Please ask your local partner or ESB SISTEMAS for further information. Flange interface SHIPPING INFORMATION PACKING QUANTITY LxWxH (mm) WEIGHT ECODB666v01+ECOSA75v02 1x 2980x680x790 300 kg Please note: As a result of more stringent legal regulations and judgements regarding product liability, we are obliged to point out certain risks that may arise when products are used under extraordinary operating conditions. The installation team must be properly qualified and also be familiar with the relevant national safety regulations. The details given in our datasheets have to be followed carefully when installing the antennas and accessories. The limits for the coupling torque of RF-connectors, recommended by the connector manufacturers must be obeyed. Any previous datasheets issued has now become invalid. POWERED BY: www.esbsistemas.com www.ecomodelsite.com 2