Transcript
X-320™
2 Programmable Digital I/O, 4 Analog Inputs, 6 Digital Temperature/Humidity Sensor Inputs, 1 Frequency Input
Features :
The X-320™ is a high-end web-based instrumentation module that can be used in a variety of scientific and industrial applications such as energy or power monitoring, meteorology, process control, and much more. It has a combination of analog and digital inputs that can be used with the appropriate sensors for measuring voltage, current, temperature, humidity, fluid level, flow, frequency, count, etc. Two digital I/O terminals can be user-configured as inputs or outputs capable of driving solid state relays or triggering the input of another controller.
• • • • • • • • • • • • • • • • • •
Two programmable Digital I/O. Four high-resolution analog inputs. One-wire bus for up to 6 temperature and/or humidity sensors. Dedicated frequency input, 130kHz max. Control up to three remote relays. Real-Time Clock with NTP server synchronization. Automatic daylight savings and leap year adjustment. Full calendar scheduling with 50 programmable events. No software required. Customizable web-based control page. BASIC script support for advanced flexibility. Configurable logging. Send email alerts based on user defined conditions. Static or DHCP IP address configuration. XML, Modbus/TCP, and SNMP interface options. Field updatable. Removable 14-Terminal connector for easy installation. Rugged DIN-Rail/wall-mountable enclosure.
The X-320™ has a built-in web server and the data it measures can be viewed using a web browser (or custom computer application). Setup is simple; there is no app to download, no subscription to buy, no software required, and no programming neccessary for setup or use. Even with its simplicity, the X-320™ has many advanced features including the ability to create BASIC scripts, SNMP, peer-to-peer communications, email alerts, and full calendar scheduling. The X-320™ is designed for accuracy and reliability, and is an innovative solution for a number of applications.
Control Page User Interface
Digital I/O Setup Pages
Telephone: 435-750-5999
[email protected]
X-320™ Remote Monitoring Frequency Sensor
Additional Applications: FLOW
Gnd 5V Out FreqIn
IP Network
Process control Industrial equipment monitoring Environmental site monitoring Remote generator start and monitoring Irrigation system control Fluid level monitoring And much more...
Model: X-320-I Power Requirements: Voltage: 9-28VDC Current: 290mA Max I/O Connector: 14-position, removable terminal strip, 3.81 mm terminal spacing Digital Inputs/Outputs: Programmable I/O: 2 Transient over-voltage protection
Pulse Counters: See Digital Input Mode 2 second average 0.5 Hz read rate
Capacitor Power Backup: Backup Functions: Retain Real-Time Clock, External Variables, Output State Backup Duration: 3 days minimum
Analog Inputs: 4 Single-ended Channels (4 Single-ended, 2 differential, or a combination) ±0.02% + 30uV Full Scale SE mode (25°C) 0 - 5 V input, full scale 151 ms sequential channel read time
Nonvolatile Memory: Memory Type: Flash Function: All user settings are stored in nonvolatile memory; settings will not be lost when power is disconnected.
Input Mode: Discrete Inputs (connect to dry contacts) Configurable debounce, 1 to 65535 ms Pulse Counter, 32-bit (250 Hz - max) 5 Vmax Input 47 kOhm Programmable 5 V pull-up/pull-down resistor Schmitt trigger input (>0.7 V hysteresis) 2.7 Vlow-Vhigh (typical) 1.8 Vhigh-Vlow (typical)
Temperature/Humidity Sensors: 6 Sensor Maximum 600 ft (180 m) maximum combined cable length
Output Mode: Logic output to external controllers 5 Vhigh through 49.9 Ohm resistor Maximum output current: 30mA per output
Humidity Sensors: 1-Wire® Digital Sensor Humidity Range: 0-100% RH ±1.8% Network: 10/100 Base-T Ethernet IPv4 Setup: Static IP address assignment or DHCP, HTTP port selectable Network Connector: 8-pin RJ-45 socket
Frequency Input: 0 - 130 kHz input frequency AC or DC input, 20 V peak to peak Sine or Square Wave (Triangle wave, add 10% to Min Vin) 2 second average 0.5 Hz read rate Auto-zero, positive slope detection Accuracy and minimum input level: Input Frequency
1 - 2 Hz 2 - 200 Hz 200 - 1000 Hz 1 - 10 kHz 10 - 50 kHz 50 - 100 kHz 100 - 130 kHz
Min Vin
90 mV 60 mV 60 mV 60 mV 60 mV 60 mV 60 mV
Temperature Sensors: 1-Wire® Digital Thermometer (Dallas Semiconductor part DS18B20) Temperature Range: -55°C to 125°C Accuracy: ±0.5 from -10°C to +85°C
Read Error
±0.5 Hz ±0.1 Hz ±1 Hz ±1.5 Hz +1/-2 Hz +1/-6 Hz +2/-16 Hz
LED Indicators: Power On I/O (1-2) Network Linked Network Activity Real-Time Clock: Manual or NTP (Network Time Protocol) setup NTP Sync Period: Once, Daily, Weekly, On Power-up Automatic Daylight Savings Adjustment Battery (capacitor) Power Backup
Environmental: Operating Temperature: -40°C to 65.5°C (-40°F to 150°F) Storage Temperature: -40°C to 85°C (-40°F to 185°F) Mechanical: Size: 1.41 x 3.88 x 3.1 inches (35.7 x 98.5 x 78 mm), connector not included. Weight: 4.8 oz. (136 g) Enclosure Material: Lexan 940 (UL94 V0 flame rated) Monitor/Control: Web Browser, XML, Modbus/TCP, SNMP Logging: Storage: Nonvolatile Flash Circular Buffer Log File Size: 512K (min 6,477 logs) Unlimited data storage possible from Web Monitoring Service Password Settings: Password protection on setup page: Yes Password protection on control page: Optional Password Encoding: Base 64 Max password length: 13 characters Electromagnetic Compliance: IEC CISPR 22, CISPR 24 FCC 47CFR15 (Class B) EU EN55024, EN55022 Product Safety Compliance: IEC 60950-1 / EN 60950-1
Telephone: 435-750-5999
[email protected]
