X-9100 Linux Hd Pvr Receiver User Manual

Transcript

X-9100 Linux HD PVR Receiver USER MANUAL Please read this user manual before using or connecting this product. And keep it handy for future reference. - 1 - Table of Contents Safety instructions ...........................................................................................................3 General Introduction ........................................................................................................4 STB (Receiver) Set up Front Panel ............................................................................. ...............................5 Rear Panel .............................................................................................................6 Remote Control Unit .............................................................................7 Connecting to TV .................................................................................9 Connecting to Dish LNB ........................................................................10 Main Menu 1. Ins talla tion ...................................................................... ........... 11 2. 1.1 Antenna Setting…………………………………………………................... ….11 1.2 Fast Scan ………………………………………………………… ..............…… .1 4 1.3 USALS Setup………………………………………………………………...…......1 4 1.4 CA Menu ……… .. ………………………………………………………………… 14 2. Channel Manager…………………………………………………………………….1 5 3. 2.1 Edit Channel…………………………………… ………………………………...15 2. 2 Edit Favorite ……………………………………………………………………… .1 5 2. 3 Sor t Channel ……………………………………………………………………… 16 2. 4 Delete Satellite Channel………………………………………………………… 16 2. 5 Factory Default …………………………………………………………………… 16 2. 6 User Channel List………………………………………………………………… 16 3 . System Settings………………………………………………………………………16 3.1 Setting .………………………………………………………………………… .….1 6 3.2 OSD ……………… .………………………………………………………… .…… 17 3. 3 Parental Lock ………………………………………………………………….. ..…17 3.4 About STB…………………………………………………………………….....… 17 4. Time Settings……………………………………………………………………..……18 4.1 Time Setup ……………………………………… .………………………… .. …… 18 4.2 Event Timer ………………………………………………… .…………… .……… 18 4.3 Sleep Timer ………………………………………… .…………………… .……… 18 5 . Game……………….……………………………………………………………..……19 6 . USB Control……....………………………………………….………………..………19 6.1 USB Menu ………………………………………………………………………… 20 6.2 USB Manager ……………………………………………………………… .. …… 22 7. Network Setting …..………………………………………….……………….………22 8. 7.1 Wireless Setting..…………………………………………………………………22 7.2 IP Setting …………………………………………………………………… .. …… 23 7.3 SMB File Setup …………………………………………………………… .. …… 23 8 . Network Application………………………………………………………….………24 8.1 VFTP ……… .……………………………………………………………………… 24 8.2 Youtube …………………………………………………………………………… 24 8.3 Radio Online ……………………………………………………………………… 25 Troub le Sh ooting …………………………………………………………………… .2 6 Technical Specification ..................................................................................................27 Glossary .........................................................................................................................28 - 2 - Safety Instructions This STB unit has been designed and manufactured to comply with international safety standards. Please read the following safety Instructions carefully before operating. 4 Power Supply: Before operating this STB unit, please check the correct supply voltage is 90~250V AC 50/60Hz. 4 Overloading: Do not overload a wall outlet, extension cord or adapter. Never a use damaged power cord or touch it with wet hands as this may result in an electric shock. 4 Liquids: To prevent damage, the STB shall not be exposed to any liquids. 4 Ventilation: Keep the slots on top of the STB uncovered to allow sufficient airflow to the unit. Do not put the receiver on soft furnishings or carpets. Do not expose the STB to direct light or do not place it near a heater or in humid conditions. Do not stack other electronic equipment on top of the receiver. 4 Cleaning: Always disconnect the STB from the electricity supply before cleaning. Clean the STB with a soft cloth or mild solution of washing-up liquid (no solvents). 4 Connection: In order to protect the LNB, always disconnect the STB from the electricity supply when you either connect or disconnect it to a satellite LNB. 4 Location: It is advisable to store the STB indoors in order not to prevent exposure to external elements such as lightening, rain or sunlight. Use the apparatus only in moderate climates (not in tropical climates). Always store the unit in a dry place. 4 WARNING: Do not remove the cover; to do so may cause a risk of an electrical shock. Always use a fully qualified and licensed engineer to repair the STB, or contact your local dealer. - 3 - General Introduction INTRODUCTION This manual will help you learn basic functions such as installation, selecting channels and many other useful features of the STB. All functions can be operated by the remote control. You can easily install the STB by selecting the “Installation” function. Upgrading the software of this unit is possible by inserting any compatible USB device, located at the front behind the flap. The remote control is specifically designed for the user to easily navigate around the menu. It is pre-programmed to control all functions of the STB. WARNING The use of unofficial software versions other than dealers or distributors official software will void the manufacturer’s warranty. It is advised that only the original software released from authorized dealers or distributors should be used. UNPACKING Unpack the unit and check to make sure that all of the following items are included in the packaging. � 1 x Remote Control Unit (RCU) � 1 x User Manual � 2 x AAA batteries � 1 x Composite Cable (A/V RCA Cable) � 1 x HD Digital Satellite Receiver (STB) Unit - 4 - Front Panel Front Panel 1) Power Button The POWER button is used to turn the power on or to put it in Standby mode. 2) Menu Button Activate the main menu in viewing mode. 3) OK Button Activate the highlighted sub menu in menu mode and activate the channel list in viewing mode. 4) CH+ / CH- Button Change channel in viewing mode and move the cursor up/down in menu mode. 5) 4-Digi Display (7-Segment) 4-Digi displays channel information. In Standby mode the 7-segment displays local time. 6) Smart Card Slot Socket for a TV operator Smart Card. 7) USB port USB2.0 port for connect to any external USB devices such as USB Disk or HDD. - 5 - Real Panel Rear Panel 1) LNB IN Connect the Satellite Dish LNB. 2) LOOP OUT Output the Dish LNB IN signal. 3) VIDEO, AUDIO-L, AUDIO-R Connect to Audio/Video of TV. Connect Yellow to Video port, connect Red and White to Audio Right and Audio Left. 4) S/PDIF Digital Audio output via RCA connector. 5) TV SCART, Connect to TV set with Scart Output via Scart cable. 6) RS-232 Connection to serial port. 7) HDMI HD signal output. 8) LAN RJ45 Output for connect to Ethernet. 9) Power Switch To Turn ON or OFF the main power of this STB. - 6 - Remote Control Unit (RCU) 1.TV/RADIO: Switch between TV and RADIO. 2. POWER: 3. MUTE: Switch the receiver on or off. Turn the sound On/Off. 4. DISPLAY: Switch the TV type. 5. MODE: Switch 4:3 & 16:9 Screen Formats. 6. TIME: Setup event timer. 7. SLEEP: Setting the time for turning the receiver off 8. NUMERIC KEY (0~9): Change program or input number. 9: SUB: Subtitle information. 10. EPG (Electronic Program Guide): TV/Radio electronic program guide information. * 12. FAV: Press to display favorite channel listing you set before. 13. TXT: Press to Display the current channel’s TELETEXT information. * 14. RECALL: Press to show the previous viewed channel. 15. SAT: Show the scanned satellite list. 16. MENU: Press to enter main menu or exit to live channel. 17. EXIT: Exit current menu step by step. 18. CH ⊳ / �: Change TV Channels. CH⊳ * EPG & TELETEXT Information may vary according to your satellite provider. - 7 - Remote Control Unit (RCU) 19. VOL VOL� / �:: Change volume in viewing mode. 20. OK: Confirm the highlighted menu item, Open the program list. 21. AUDIO: Select or change the Audio. 22. PAUSE: Pause and Freeze the picture. 23. ZOOM: Zoom in current TV channel 24. INFO: Show the information of the current channel. 25. VOL +/-:: Change volume in viewing mode. 26. FIND: Quickly find channels 27. : Activate Multi picture menu and select picture 28. PAGE+/-: Page up/down on menu. 29. F1: Function key. 30. USB: Access the USB menu. (Note: USB Device must be first connected) �� 30. 30.�� ��:: Fast forward. 31. 31.⊳⊳:: Fast backward. 32. �: Start playing / Release pause. 33. ■: Stop recording. 34. I⊳⊳: Play previous item. 35. �� ��II: Play next item. 36. I I: Pause/time shift. 37. ●: Start recording. - 8 - Connecting to TV Various equipment and TV’s/VCR’s can be connected to this STB. The manual will explain common ways to connect to the equipment, if you experience any problems, please contact your sales agency. 1. How to connect the STB to a TV set • (1) Connect one end of the SCART cable to the TV SCART socket on the back of the STB and the other end to the SCART input socket on your TV. • (2) Connect the Antenna cable to TV ANT IN collector of the STB. - 9 - Connecting to DISH 2. How to connect the STB to DISH (1) Connect one end of the F cable to the LNB IN socket on the back of the STB and the other end to the LNB installed on your DISH. (2) You can connect one fixed dish LNB directly to the LNB IN, or connect at least two DISH LNB’s by selecting the DiSEqC Switch, you can also connect to HH mount dish LNB. - 10 - Main Menu Plug in the STB power, and turn on the STB, the beginning of the OSD screen will appear, press MENU button to begin your INSTALLATION The Main Menu displays various functions of the STB or you can select with “UP/DOWN” buttons and the numeric buttons on the remote control. To proceed to the next stage, press the “OK” button on the remote control. Main Menu Press MENU button to activate main menu, this consists of Installation, Channel manager, system settings, Time Settings, Features, & CA System Use UP/DOWN button to highlight your selection and press OK to confirm. Sub menu options will then follow. By pressing the EXIT button you can return to the previous menu. 1. INSTALLATION � ” The default password for this STB MENU is “0000 0000” Select Installation, press OK button to activate Installation menu, the Installation window will be displayed. 1.1 Antenna Settings Press OK button to enter Antenna Settings; here you can make Satellite Search, Satellite Edit, blind Search and other Functions. Satellite List Press OK button, you can see the Satellite list, in this menu, you can select, add, move, rename, & delete Satellites. Select In this menu, you can press the UP/DOWN keys choose the satellite which you want to use, then press the OK to confirm the settings, thereafter you can set other parameters. - 11 - Main Menu Add Select the Add using the LEFT/RIGHT buttons. Here you can input new Satellite angle, Satellite Direction (east, west), Band (Ku or C). Press OK to confirm the setting, and this new satellite will be added to the end of the Satellite list. Move In this menu, you can select the satellite that you want to move from the satellite list using the UP/DOWN keys, then press OK. You will be asked to move the satellite to a specific position number, input the destination number and press OK. Then you can move one satellite from one position to another. Delete You can delete the user satellite. Press the OK button select the satellite that you want to delete from the satellite list. You will be asked to confirm whether delete the satellite or not. If you select YES, all the channels in the selected satellite and transponder will be deleted. Press the OK key, and the selected satellite will be erased. Rename Satellite You can also change the satellite name. Select the Rename using the LEFT/RIGHT keys. Press OK key and select the character which you want to edit using the character display panel. Transponder List If you change the satellite, the transponder will be changed automatically. You will find the transponder list of the selected satellite here In this menu you can select, Delete, Edit and Add a Transponder. This operation is similar to the one above, you can input the transponder frequency symbol rate, choose polarization H or V (Horizontal,Vertical) and FEC (1/2, 2/3, 3/4, 6/5, 7/8, Auto). - 12 - Main Menu LNB frequency and power Here you need to check the LNB frequency according to your antenna, set the correct frequency or define yourself, and keep LNB power to be 13V/18V or 14V/19V. 22KHz In case you are using two antennas connected to a 22KHz tone switch box. You can supply either 22KHz by setting “ON” or “OFF” to select antenna. DiSEqC type DiSEqC1.1 If you connect antenna to DiSEqC Switch, you need to specify the DiSEqC input to which your selected satellite have been configured. USALS If you use USALS and select the Motor Mode to USALS, here one more option you can move the dish to exact position of the satellite. � Before you use USALS, you should go to Main Menu → Installation → USALS Setup to set you local position first ! Scan Mode In this menu, you can select all Channels & FTA Channels by setting the search option Start Search In this menu, you can select Satellite & Multi-Sat & Transponder or Blind Scan which you want to start search When you press ok you will be asked whether to search by network, you can choose either yes or no. Satellite Search Selecting one satellite, and press OK to mark. You can select more than one satellite at this time, but make sure they are all configured to your DiSEqC Switch, after selecting, Press OK will start the searching process. During searching the TV Channels and Radio Channels will be listed separately. - 13 - Main Menu Transponder Here you need to select one satellite to where your dish is currently pointed, then select the frequency, you need to setup the Polarization of that Selected Transponder, Symbol Rate, FEC .Pressing OK will start searching. During searching process the TV channels and Radio channels will be listed separately. Blind Scan A smart function which allows the user to search the desired Satellite without having to know the TP data, but you are required to set up correct LNB settings first. 1.2 Fast Scan In this menu, when you are in Astra (19.2) satellite, base on the transponder (12515, 22000, H, 5/6), you can fast search channels by different providers. 1.3 USALS Set Up You can setup the Dish position to the satellite you want to search, you need to check the detailed information from internet and input the accurate parameters about your local position. � Press the Red button, you can choose the desired country, press the OK button again, you will then view the listed city in this country that you have selected. 1.4 CA Menu CA means Conditional Access, in this menu, it will show the Smart Card information when a Smart Card is inserted into this STB - 14 - Main Menu � CA Menu is only valid after a Smart Card is inserted 2. CHANNEL MANAGER 1 Edit Channel 2. 2.1 Here you can Select Channel and Delete/Un-delete Channel, Rename Channel, Move Channel, Lock Channel, Select TV Channels, you will get this window. You also can group move the channel. 2 Edit Favorite 2. 2.2 Here you can set the channel into different favorite category, such as News, Movies, Music, Sports, Education, Weather, Children, Social, Culture. Press different function color button select any sort press OK on viewing mode you can set the channel type according your mind. 3 Sort Channel 2. 2.3 In this menu you can sort the channels in different order, such as language, FTA, satellite, transponder, favor and Alphabet. - 15 - Main Menu 4 Delete Satellite Channel 2. 2.4 In this view, you can delete satellite channels. Press OK you will be asked to confirm. Select either “YES” or “NO”. If you select “yes” all data under this satellite will be lost. 2.5 Factory Default When you choose to set the unit to Factory Default, your STB will be in the original status when you first purchased this product. You can erase all the channels and settings. This can be made by selecting All, then press OK you will be asked to confirm, select either “YES” or “NO”. If you select “YES” all data and current settings will be lost. 6 User channel list 2. 2.6 Nice feature allow user to save the channels and satellite data into the memory of receiver, No need external USB device at all !!! In this menu, you can save and load the channel list, and you can have different channel list as well. 3. SYSTEM SETTINGS 1 System 3. 3.1 You can setup the menu language, audio language according to the standard of your country. You also can set the recall list, volume per channel function on or off. - 16 - Main Menu 2 OSD 3. 3.2 Here you can setup the menu background, transparency and colour, and help information for menu. Time out means the duration of the information bar. You also can setup the HDMI resolution by pressing the Right /Left button, you can change the HD format from 1080i to 720p/576I. After you confirm, the TV format can also be changed 3 Parental Control 3. 3.3 This function prevents children or unauthorized persons from watching programs. You can set the password for Installation, Edit Channel and System, also you can change the Password, the default password is 0000. When you choose yes, you can change the password option to unlock or lock some menu enter 4 About STB 3. 3.4 In this window, you can get the information about the STB, such as product name, software & hardware version, and so on. - 17 - Main Menu 4. TIME SETTINGS 4.1 Time Setup The default time setup is auto, you also have the option to select this manually, enter the time zone of your country by pressing the LEFT/RIGHT arrows and you will get the correct current time which is based on TDT (Time and Data Table) in the stream of the current channel service. � The time you set will be shown on the front panel when you set receiver to standby mode. 4.2 Event Timer Here you can set the channels that you like, customized the time to jump to the designated program. You can also customize time to record the designated program, you set including both TV and Radio, you can add, edit and delete the timer event. � You can add multi-groups in event timer. 4.3 Sleep Timer You can set Sleep timer and this function will set receiver to go into Standby mode automatically according to the time you set, user defined time is available as well. - 18 - Main Menu 5. GAMES Here you can find two highly playable internal games for your entertainment purpose ! Hexa Games and Mine !! 6. USB CONTROL Here you can enter the USB menu, and also can set some net parameter and browse web view 6.1 USB Menu � This STB is designed to work with FAT & FAT32 & Ext2, Ext 3, and NTFS format USB devices Plug any compatible USB device into this STB, and enter USB menu, here you can play movies, listen to music, and view your favorite pictures which are installed on your USB device. Supported Video formats: MP4/3GP/MPG/AVI / MKV /MOV/TS/ VOB/ DAT/ M2TS/ FLV/ ASF. Supported Audio formats: MP3/PS. Supported Picture formats: JPG/BMP/ PNG/GIF. RCU Buttons for USB multimedia function OK OK: View play list / Play the selected file in play list �: Play the selected file in play list / Resume playing file ■: Stop playing file - 19 - Main Menu I⊳⊳: Play the previous item ��II: Play the next item ⊳⊳: Fast backward ��: Fast forward II / PAUSE: Pause the video or music ⊳ / �: Adjust volume 【F1】: Jump, you can jump to the specific time of one video. 【F3】: Adjust the output of Video format, such as 16:9; 4:3 EXIT EXIT: Exit play list menu / Exit playing state and return to file list menu. Press BLUE button switch LOOP OFF/ON, so you can play the files in loop mode Press GREEN button get HELP message. Press YELLOW button to download the STB database to your USB device. Press RED button to get the detailed information about the specific file. � You can can’’t play music file under a movie folder, nor in picture folder, so please always choose correct folder for your multimedia files. � USB PVR Plug the USB device into your STB, simply press RECORD button on the RCU, the Recording of one specific channel is beginning, even you can still change your channels if the recorded channel TP contains other channels. ATTENTION FOR USB DEVICE and PVR FUNCTION Supported Devices: 1) Most of the popular USB 2.0 Hard Drive Disks are supported by our STB, however if you find one particular HDD that does not work with our STB, please kindly provide us with some information about your hardware, so that we can solve possible incompatibility issues. 2) System required: FAT, FAT32, NTFS 3) Minimum Speed required: 5400rpm - 20 - Main Menu Instructions to TV program 1) Any HD or SD TV program can be recorded by this STB via a external USB device, the recorded format is TS. 2) During recording, EPG; TXT; Multi AUDIO functions can not be operated. Recording Capacity 1) Our STB can support up to 4 partitions of one HDD, and theoretically each partition can allow up to 2TByte (2,000Gb), however, we do suggest to use one HDD with each partition not bigger than 120Gb WARNING USB1.1 or USB2.0 Key or Stick (Including MP3 player) 1) We strongly suggest not to record any TV program by USB Key or Stick, because a huge of different USB Key or Stick are indeed available in the market with different quality level, we do not guarantee any damage of your USB Key or Stick from the attempting recording. 2) Do not remove your USB device from STB while it is in use of any USB multimedia function. � Time shift Plug the USB device into your STB, simply press the II button, the current TV will freeze, and now the STB enter the Time Shift mode. You will never miss any exciting moment of your favorite TV shows. You can pause and resume a live television program, and even rewind and replay it. When you are watching a program and you miss something, you can rewind and replay it.. When you do this, you are no longer watching the live program; instead you are watching a delayed presentation of it. This is called time shifted television. 1) Press II to pause, The video screen will freeze, but the recording will continue. - 21 - Main Menu 2) To go back in time, hold down the t t button; to go forward, hold down the u u button. 3) Press the EXIT button, you will be asked whether to exit or save the program data, select yes or no. 6.2 USB Manager You can edit the files in the USB device by this menu Press RED button to list detailed information about the USB device Press GREEN button can rename, delete, create the files. Press YELLOW button to set the recording path 7. NETWORK SETTING 7.1 Wireless Setting Enter this view, you can set some net parameter and browse web Wireless Settings Provided you have a compatible* USB WIFI Dongle, you can plug it into the USB port of this STB, and in an area where WIFI is available, you can then connect to the internet. IP Status In this view, you can check the IP address and the status of the WIFI internet connection. Search Access Point: This option search to Access Point for WIFI internet, if you found any WIFI site, press “OK” button, then enter password and again to verify. If the password is ok, it will - 22 - Main Menu automatically connect the STB to WIFI internet. Entering the IP SETTING menu will display the status and details of your current connection. � *This STB supports only the USB WIFI Dongle with embedded chipset model ZD1211 series. 7.2 IP Setting IP Settings In this menu, you can check the internet connection status, The default setting is DHCP ON, and you can set DHCP ON or OFF by pressing the GREEN key. DHCP: IP-subnet mask and Gateway are not set because the DHCP server automatically assigns these parameters. Static IP: This option allows the user to manually enter a specific IP-address, IP-subnet mask, DNS and Gateway To set DHCP ON, press the BLUE key, start auto search IP, you will be asked to confirm, to continue select yes, the receiver will then automatically reboot itself. � If you are connected to the internet, the status will show CONNECTED. 7.3 SMB File Setup SMB stands for SAMBA, www.samba.org www.samba.org, which is a kind of open source code available to connect LINUX system equipment with Windows, with this function, so you can share your files from Windows PC to this STB, due to this function is quite professional, so it is strongly suggested that you go to www.samba.org to check and learn further information. Example: Enter this menu, input in the windows share address for example 192.168.0.45/user, set user name and password, select the SMB Enable, you will be asked whether enter the file, choose Yes or No, after select Yes, then press RED button link to the windows share. After above step, enter the USB menu, you can browser over the file of the windows share, if any media file available, you can play it directly. - 23 - Main Menu 8. NETWORK APPLICATION 8.1 VFTP You can created your FTP server on your Windows PC, and through the internet connection, you can view the files on Windows FTP in this menu So you can play movie or music, pictures of PC directly on the TV via VFTP function 8.2 Youtube This STB has a unique feature which will allow the user to connect with the Youtube website, www.youtube.com In addition, you can browse millions of HD or SD videos made public on the Youtube website through our STB, the operation method is quite simple with just a few clicks on the Remote Control Unit (RCU). 4 You can only enter into Youtube when internet connection is connected with STB, - 24 - Main Menu 8.3 Radio Online This STB has unique feature which allow user to connect with internet radio station, so you can enjoy the digital quality CD sound right at your home, the operation method is just simple as a few click on RCU. � You can only enter into Radio Online when internet connection is connected with STB - 25 - Trouble Shooting Trouble shooting You might meet abnormal working of this STB with various reasons, check the following which may help you. Trouble Possible causes What to do LED on the front panel fails Mains supply cable is Check if the mains supply cable to light up/is not lit. not connected. is plugged into the power socket. No picture or sound. Satellite dish is not pointed Adjust the dish. Check the signal to satellite accurately. strength indicator in one of the channel search submenus. No signal or weak signal. Check the cable connections, LNB and other equipment connected to LNB & The LNB is faulty. receiver, or adjust the dish. The cable is faulty. Replace the LNB. Replace the cable. Bad picture/blocking Satellite dish is not pointed to error. the satellite accurately Adjust the dish. Signal too strong. Connect an attenuator to LNB input. Satellite dish is too small. Change to a larger dish. LNB noise factor too high. Change LNB with lower noise factor. The LNB is faulty. Replace the LNB. No startup menu on screen The system is connected by Switch the TV to the appropriate AV after turning on STB for the SCART cables and the TV is input. first time. not in AV/ EXT mode. The remote control unit Battery exhausted. Change the batteries (both). (RCU) is not working. Remote control is not Aim the remote control at the STB. aimed correctly Check that nothing blocks the front panel. STB is in standby mode. Check if LED indicator on the front panel is showing the time, press the power button to switch off standby mode. You have forgotten your Contact the dealer or Service Provider. password. They will help you set it up again. Poor picture quality or Less Low LNB power or signal Change the LNB power to 14V/19V in channels in scanning. loss in cable. Antenna setup menu. - 26 - Technical Specifications Tuner & Demodulator Demodulation Frequency Range Signal Level RF Impedance LNB LNB Tone Switch DiSEqC Control Symbol Rate FEC Decode & 8PSK QPSK, 8PSK 950 MHz to 2150 MHz -25 to -65 dBm 75Ω Ohms unbalanced 13V/18V/OFF, max = 400mA 22KHz+/-2KHz, 0.6Vpp+/-0.2V Version DiSEq C 1.0/1.1/1.2/1.3(USALS) Compatible, Tone burst A/B 2.0~45 MS/s/s/SCPC,MCPC Convolution Code Rate 1/2, 2/3, 3/4, 5/6, 7/8,3/5, 2/3, 3/4, 5/6, 8/9, 9/10, automatic MPEG Transport Stream Profile Level Input Rate Aspect Ratio Video Resolution Audio Decoding Audio Mode Sampling MPEG-2 ISO/IEC 13818Transport stream specification MPEG1,MPEG-2 MP@ML,H.264, VC1, DV, DivX, and MPEG4 80 Mbps for MPEG Transport Stream and 25 Mbps for DV streams 4:3, 16:9 1920 Į 1080i and 1280 Į 720p for HD video,720 Į 480p, 720 Į 480i, 720 Į 576i, and 720 Į 576p for SD video. MPEG-2 layer I and II (Music cam),MPEG4 AAC and MPEG4 AACHE (AAC+),Dolby Digital (AC-3) with bit rates up to 640 K bits /s, LPCM up to 48 KHz,MP3. Single channel/Dual channel/Joint stereo/Stereo 32, 44.1 and 48 KHz A/V and Data In/Out Connector TV SCART 3 x RCA RS-232C LNB IF Input LNB IF Output RGB, CVBS, L, R out AUDIO L, R. VIDEO out. RS232C D-sub male type. F type, IEC 169-24 Female F type, IEC 169-24 Female Power Supply Input Voltage Power Consumption Protection AC 100 ~240V, 50/60Hz Max. 25 W Separate internal fuse. Input shall have lightening Protection Physical Specification Weight (Net) Operating Temp Storage Temp Around 14.61kg 0℃ to + 40℃ -40℃ to + 65℃ - 27 - Glossary 4 Antenna A device that collects and radiates electromagnetic waves. Includes a satellite dish and broadband antenna. 4 DiSEqC DiSEqC (Digital Satellite Equipment Control)system, it is a communication bus between satellite receivers and peripheral equipment using only the existing coaxial cable. 4 DVB The Digital Video Broadcast group was created to establish a technical framework for the introduction of digital video broadcasting systems. 4 LNB (low-noise block converter) or LNB An electronic unit mounted on the satellite dish. It receives the signals reflected by the dish and converts them to signals that can be used by the digital satellite receiver. 4 GHz The prefix giga means milliard, and Hertz means cycles per second. Signals in the GHz range are often called microwaves. 4 MHz The prefix mega means million, and Hertz means cycles per second. 4 MPEG Moving Picture Experts Group. Established by the International Standards Organization to provide the basis for a picture coding and compression system. 4 Forward Error Correction (FEC) A system of error control for data transmission. - 28 - Glossary Polarization Polarization allows several programmers to be fit into the same frequency band. The signals from a satellite are transmitted either with linear (vertical or horizontal) polarizations or circular (right or left) polarization. 4 QPSK (Quaternary Phase Shift Keying) Phase-shift keying in which four different phase angles are used. 4 Transponder An automatic device that receives, amplifies and retransmits a signal on a different frequency. 4 Symbol rate Speed of the digital transmission 4 RGB Red, Green, Blue. Color signals are routed in separate cables in order to provide a high quality TV picture. 4 Scrambled TV programmer Some TV programmer are transmitted in scrambled form. 4 SERIAL RS 232 A serial communication standard data port. 4 SCART A 21-pin connector used for connection of the Media master, TV. Also named Euro connector or Partial connector. S/PDIF Sony/Philips Digital Interface Format. Digital Audio output. Address: Floor-809,West Tower, Coastal City, Hai De 3 road, Nanshan Area, Shenzhen City, Guangdong Province,China 地址：（中国）广东省深圳市南山区海德三道海岸城西座 809 室 Tel: +86 755 216 79069 Mob: +86 159 893 964 29 Email:[email protected] [email protected] Web: www.inpax.com.cn - 29 -