Transcript
X-HTC-1001
Repair Parts
CATALOG
for SUNNEN® TUBE HONING MACHINES HTC SERIES HTC-1121 (Linear Feed) & HTC-2121 Version: Date:
VCS11/21 12 April, 2006
READ THE FOLLOWING INSTRUCTIONS THOROUGHLY AND CAREFULLY BEFORE UNPACKING, INSPECTING, OR INSTALLING THE HTB-TUBE-HONING-MACHINE. “SUNNEN AND THE SUNNEN LOGO ARE REGISTERED TRADEMARKS OF SUNNEN PRODUCTS COMPANY.”
SUNNEN PRODUCTS COMPANY 7910 MANCHESTER ROAD y SAINT LOUIS, MO 63143, U.S.A. y PHONE: 314-781-2100 SUNNEN AG · Fabrikstrasse 1 · 8586 ENNETAACH · SWITZERLAND · PHONE: + 41 71 649 33 33
TABLE OF CONTENTS
VCSS11
TABLE OF CONTENTS
1
HOW TO ORDER
2
INTRODUCTION
2
HOW TO USE THIS PARTS LIST DRIVE MECHANISM LFS-110
DRIVE MECHANISM Spindle Nose Cover DRIVE MECHANISM 2
STROKE MECHANISM 1
2 4 6 7 9
STROKE MECHANISM 2
11
COVERS AND COOLANT
13
MOVING SUPPORT
12
TOOL SUPPORT
15
HOLDING FIXTURE
ELECTRICAL 1, Drives (Diagram VCSS11) ELECTRICAL 1, Drives (Diagram VCSS11)
ELECTRICAL 2, Upper Side (Diagram VCSS11) ELECTRICAL 2, Upper Side (Diagram VCSS11)
ELECTRICAL 3, IPC-Control (Diagram VCSS11) ELECTRICAL 4 (Diagram VCSS11) PNEUMATIC SYSTEM (HTC-2)
PF-401 FILTER UNIT (Optional)
16 18 19 20 21 22 23 25 27
Like any machinery, this equipment may be dangerous if used improperly. Be sure to read and follow the instructions for the operation of the equipment.
1
INTRODUCTION Illustrations show all major components in exploded detail. Item numbers on each illustration are keyed to he’s corresponding parts list, providing a descriptive identification of each part. The parts list includes assemblies as well as detail parts. Items listed without a part number can be optioned as a component of the complete assembly of which it is a part. SUNNEN AG reserves the right to make changes, without notice, to materials, specifications, colors, designs and accessories includes with units.
HOW TO ORDER When ordering replacement parts are sure to include the following information to insure prompt shipment of correct parts: 1. The part number and description of each part desired, obtained from this parts catalog. 2. The quantity of each part desired.
3. The voltage, frequency and phases, when ordering electrical parts.
4. The model and serial number of the honing machine, obtained from the nameplate, when there is any question concerning a part.
HOW TO USE THIS PARTS LIST Step 1. - Locate desired part on illustration. Note item number. Step 2. - Locate item number in the parts list. Step 3. - If the item has a part number listed, order by part number and the description. Part numbers lightface type indicates that it is a component of the last preceding part number in bolt face type. ORDER ONLY BY PART NUMBER AND DESCRIPTION - NOT by item number.
Step 2
Step 3
ITEM NO.
ORDER BY PART NUMBER
QTY.
DESCRIPTION
1
SR-220
1
Movable Fixture (including Item 2-10)
2
SR-1023
1
...T-Slide
3
SR-1024
1
...Holder
4
SR-1025
1
...Positions Plate
5
SR-1026
...Hole Plate
2
3
DRIVE MECHANISM LFS-110 PARTS LIST COVERING FIGURE „ Drawing LFS-110 “ ITEM NO. 1 2 3 4 5 6 7 8 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 28 29 30 31 32 33 34 35 36 37 38 39 40
ORDER BY PART NUMBER LFS-1001-1 LFS-1002 LFS-1004 LFS-1005 LFS-1106 LFS-1107 LFS-1108 LFS-1109 LFS-1011 LFS-1112 LFS-1113 LFS-1014 LFS-1115 LFS-1116 LFS-1118 LFS-1120 LFS-1019 LFS-1121 LFS-1122 LFS-1125 LFS-1124 LFS-1027
LFS-1128-1 LFS-1150-1 LFS-1151-1 LFS-1152 7208BG
7204B.TVP.UA 6201 2RS 6001 2Z
1551-0-1700 1512-1-1013 1590-0-1200 0601-016-10 450 113
32-8M-20 5F ST TB 1610
QTY. 1 1 1 1 1 1 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 2 2 1 2 1 1 1 2 1 1
DESCRIPTION Gear Housing Wheel Z54 Housing
Ball Screw Housing
Ball Screw Housing Cover Ball Screw Adapter Inner Disk
Outer Disk
Holder Sensor
Axial Bearing Housing Axial Bearing Cover Ring Bar
Spindle
Feed Adapter Ring Ring Ring
Spindle Housing Distance Ring
Bearing Cover Ring
Belt Cover
Adapter Axial Bearing Tube
Holder
Bearing Bearing Bearing Bearing
Feed Spindle KGT D=20 5/0.052 T7, Length 198mm Flansh Nut D=20x5 Bearing
Ball Bearing ø 26/16x36
Feed Motor Coupling ø 10/11 (MK1-45-37-10-11) Tooth Belt Wheel Z32
4
41 42 43 44 45 46 47 48 50 52 53
TB 1610 19
720-8MGT-20 18/11x32 A12x1
I26x1.2
BN218 M40x1.5
BN1359-12x16/M10 102253 102261
BES-516-377-E5-D-S49 AT-32-PUR-90
1 1 1 1 1 1 2 1 1 2 2
54
6
55
7
56
4
57
4
58 59 60
LFS-1153-2 LFS-1154-2 LFS-1155
1 1 1
61
2
62
6
63
3
64
1
65
1
66
2
67
1
68
1
69
1
70
1
71
1
72
01.08.1806
not shown not shown not shown
Tooth Belt, GATES PowerGrip GT2, L= 720mm Key
Seeger Ring Seeger Ring Nut
Screw
Servo Motor Feed
Servo Motor Spindle DBL4 N00530 Sensor for max/min Feed Stroke Plug for Sensor
Cap Head Screw M8x30 Cap Head Screw M5x12 Cap Head Screw M5x20 Cap Head Screw M8x16 Hood
Cover
Cover Feed Screw
Cap Head Screw M6x100 Cap Head Screw M6x25 Cap Head Screw M6x35 Cap Head Screw M8x20 Cap Head Screw M8x25 Worm Screw M6x8
Pin hardened 8m6 x 50 Worm Screw M6x16
Pin hardened 10m6 x 40 Worm Screw M6x12 Worm Screw M5x10
ABS- Housing 80x175x57mm
2
VULKAN Thermostat 0-85°C
LFS-1202
1
LFS-1203
Heather Wire Spindle Motor 230 Volt, 150 Watt Length = 5650mm
1
LFS-1204
1
73 74
1
Taper Lock
Heather Wire Spindle Housing 230 Volt, 110 Watt Length = 3000mm Heather Wire Axial Bearing 230 Volt, 30 Watt Length = 1000mm
5
DRIVE MECHANISM Spindle Nose Cover
77 78
FIGURE; Spindle Nose Cover PARTS LIST COVERING FIGURE „ Spindle Nose Cover “
ITEM NO.
ORDER BY PART NUMBER
73 74
QTY.
DESCRIPTION
1 BN1359-8x50/M6
1
Shoulder Screw M6x50
75 76 77 78
LFS-1156 LFS-1157
Cover
Alu Holder for Cover
6
DRIVE MECHANISM 2
1 2 3 5
2 4
6 7
8
14
FIGURE; Spindle Retractor Carriage
7
DRIVE MECHANISM 2
PARTS LIST COVERING FIGURE „ Spindle Retractor Carriage “ ORDER BY PART NUMBER
ITEM NO. 1 2 3 4 5 6 7 8 not shown not shown
HT-2002
HT-2005-1 HT-2004 HT-2008
JZK M10x20
11 6241 0110 11 6241 0107 HT-2006 HT-2007
QT Y. 1 1 1 1 1 1 1 1 1
DESCRIPTION Lock Bolt Plate
Lock Bolt and Taper Sleeve Lock Bolt Sleeve Piston
Cap Head Screw Airzet Seal ø 60 Airzet Seal ø 40
Air Cylinder Housing Air Cylinder Cover
60x2
1
O-Ring
14
0934 010 0404 0934 016 2601
1
Plug male (X121)
not shown
0934 010 0304 0934 016 2701
1
Plug female (X121)
XCM-B515
2
Safety Switch S716L / S716R (Pkg. of 1)
not shown not shown not shown not shown
0731-240-40
AT-32-PUR-90
I3N-M8TIS-PO6
4 1 1
Linear Bearings (Pkg. of 1) Plug for Sensor
Sensor Initialization
8
STROKE MECHANISM 1
1 2 8 6
7
3
4
9
FIGURE; Chain Adjuster
9
STROKE MECHANISM 1
PARTS LIST COVERING FIGURE „ Chain Adjuster “ ITEM NO. 1 2 3
ORDER BY PART NUMBER HT-2112 HT-3018 HT-3019
QTY.
1 2 1
DESCRIPTION Duplex Chain Wheel with two Bearings Spacer Bolt
4
HT-3017
1
Duplex Chain Adjuster
6
MF-30x2x200
1
Spindle
7 8 9 not shown not shown not shown not shown
HT-2046
MF-30x2-M HT-3038 HT-3020 HT-3025
12.2101.0403 JZK-M12x80
1 2 1 1 1 1 1
Washer Nut
Chain Guard
Damper Holder
Back Stop Washer Damper
Cap Head Screw
10
STROKE MECHANISM 2
FIGURE; Stroke Drive ITEM NO. 1 2 3 4 5 6 8 9
ORDER BY PART NUMBER RLD 1600 5571 HT-2110
QTY.
1 1
HT-3004-1
1
16B-2NR3
1
30069 ZHAA
1
16B-2
Clamp Sleeve ø 55 / 71 Duplex Chain Wheel
Gear Flansh with Screws
Duplex Chain 1“x17mm (Pkg. of 1 meter)
C9DE0026/CYD32615 81679
DESCRIPTION
Chain Locker
Stroke Gear MT ø 55x80 (i=26) 1
Coupling ø 24/24
Servomotor Stroke 3,0 kW (6SM 71K-3,000)
11
MOVING SUPPORT 7
1
5 2 3
6 4
FIGURE; Moving Support ORDER BY PART NUMBER
ITEM NO. 1 1 1 1 1 2 3 4 5 6 not shown not shown not shown
7 not shown
SR-1060 SR-1061 SR-1062 SR-1063 SR-1064 SR-1057 SR-1010
GN617-6-AK 1607-204-31 1691-294-10
VK332-5DO-M5 K33
EVM130-F01-00 C85N25-10C00 EAR-2000_F01
QTY.
1 1 1 1 1 1 1 1 1 1 1 1 1 1 2
DESCRIPTION Guide-Shells ø 5mm Guide-Shells ø 7mm Guide-Shells ø 7mm
Guide-Shells ø 13mm Guide-Shells ø 16mm Holder for LFS-Guide Guide Holder Position Bolt Rail
Linear Bearing
3/2 Air Valve Y2001 (Moving Support) Plug (Moving Support)
3/2 Air Valve mechanical
Air Cylinder (Moving Support) Regulator (Moving Support)
12
COVERS AND COOLANT
1
2
3 11
13
FIGURE; Covers and Coolant
13
COVERS AND COOLANT
PARTS LIST COVERING FIGURE „ Covers and Coolant “ ITEM NO. 1 not shown
2 3 not shown not shown not shown not shown not shown
11 13
ORDER BY PART NUMBER HT-3072 HT-3050 HT-3071 HT-2019 626-ZZ
HT-2045
GN 565-20-112-EL RB-1700
QTY.
2 1 1 4 10 4 2 2
DESCRIPTION Main Splash Guard left(Pkg. of 1) Splash Left side
Splash Guard Holder with Screws (Pkg. of 1) Rails (Pkg. of 1)
Bearings for Rails
Guard Guide green Plastic (Pkg. of 1) Handle
Flow Control Valve
004-01
2
Tube 0,75m includes
004-61500
1
...Tube
004-61502
1
...Nozzle
004-61505
1
...Fitting 3/4“
TB 100/270-G1
1
Coolant Pump
F-DMP.150
1
Magnetic Separator
14
TOOL SUPPORT 5
6
2
4
1
FIGURE; Tool Support
ITEM NO. 1 2 not shown
4 5 6
ORDER BY PART NUMBER TS-4001 TS-4002 TS-4003
TS-4004 / BN325-25 GN300-92-M10-OR TS-2007
QTY.
1 1 1 1 1 1
DESCRIPTION Holder Arm
Spindle
Clamp Ring Lever
Plastic Plate
15
HOLDING FIXTURE
FIGURE; Holding Fixture
16
HOLDING FIXTURE
PARTS LIST COVERING FIGURE „ Holding Fixture “ ITEM NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 not shown
ORDER BY PART NUMBER HT-2031 820.152
HT-2035
JSS-M8x12 HT-2030
ZSG-10x80 HT-2033
JZK-M8x80 E-2395
E-3171X
RZK 1922-V
HT-2037 / HT-3005 JZK-M10x20
DIN-580/M20 HT-2038
HT-2036 / HT-3006 HT-3007
JZK-M12x30 JZK-M12x80
QTY.
1 2 1 2 1 1 1 2 1 1 1 1 4 1 1 1 2 4 1
DESCRIPTION Prism
Clamp Shims with Screws (Pkg. of 2) Chain Anchors (Pkg. of 2) Set Screws
Chain Roller
Pin ø 10 mm
Clamp Screw Block Cap Head Screw Spindle Handle
Chain (Pkg. of 1,3m)
Prism Plate and Spindle Assembly TR 60 Cap Head Screws Eyebolt
Adjusting Nut TR 60
Base Plate Assembly ø 60 Clamp Locks (Pkg. of 1)
Cap Head Screw (Pkg. of 1) Cap Head Screw
HT-2047
1
Sleeve
A2399-100
1
Chuck Clamping System
17
ELECTRICAL 1, Drives (Diagram VCSS11) T410
K2016
K706
A110
A120
A130
FIGURE; Electrical 1
18
ELECTRICAL 1, Drives (Diagram VCSS11) PARTS LIST COVERING FIGURE „ Electrical 1 “ ORDER BY PART NUMBER
DIAGRAM NO.
QTY.
DESCRIPTION
89703
1
89701
1
89703
1
T410
6EP14363BA00
1
SITOP Power 24 Volt / ??A
K706
DIL 1M-G(24VDC)
1
Contactor
A110 (Stroke)
A120 (Feed)
A130 (Stroke)
SERVOSTAR 610-AS
Speed Regulator
SERVOSTAR 610-AS
1
DIL EM-10-G(24VDC)
K2016
Speed Regulator
SERVOSTAR 603
22 DIL M
K706
Speed Regulator
1
Sub Contactor Contactor
Outside of ELECTRICAL ENCLOSURE ITEM NO.
DIAGRAM NO.
S711, S712 S711A, S712A
ORDER BY PART NUMBER 10721S 10721E
QTY.
1 1
DESCRIPTION Sender of Light Barrier SLA25
Receiver of Light Barrier SLA25 with LED
19
ELECTRICAL 2, Upper Side (Diagram VCSS11) A711
A403
K2011
S100
K2014
K2026
K2027
K2028
K2008 F414
A1000 -1030
F413
K2009 K705 A702 X2009
Q103a
F402
Q411 Q110
Q.. Q311
Q312
Q314
F401 F317 K2022
FIGURE; Electrical 2
20
ELECTRICAL 2, Upper Side (Diagram VCSS11) PARTS LIST COVERING FIGURE „ Electrical 2 “ DIAGRAM NO. A403 S100 A711 A1000, A1010, A1020, A1030 A1000, A1010, A1020, A1030 A702 K2011, K2014, K2026, K2027, K2028, K2008, K2022 K2009 X2009 F413, F414 Q103A Q411
ORDER BY PART NUMBER IPC HTC MKV-0 SK3150 100
P3-63/EA/SVB-SW/N SLVA-4K
QTY.
1 1 1 1
IPC-Control Air Van
Main Switch
Light Barrier Control 24VDC
DC8I8O50
4
I/O OPTO-Conditioner
FBK26P
4
Flat Wire to OPTO-Conditioner
PNOZ/475695
1
Emergency Stop Control
C9-A41DX (24VDC) DIL ER-22-G(24VDC) DEK-OE24DC/48DC/100 FAZNC10
CL-PKZO
PKZM0-1.6
Q110
PKZM0-25
Q311
PKZM0-1.0
7
Relays (COMAT)
1
Contactor
1
Optokoppler
2
Circuit Breaker 10A
1 1
Manual Starter 1.6A Manual Starter 25A
1
Manual Starter 1,0A
PKZM0-0.63
Q312
PKZM0-1.0
1
Q311, Q312, Q314
NHI 11-PKZ0
3
FAZNC10-N
Supply Limiter
1
Q312
F317, F401, F402
DESCRIPTION
1
3
Manual Starter 0,63A (Machines 1 up to 3 Meters)
Manual Starter 1,0A (Machines with 500 Liter Coolant Reservoir) Contactor to Manual Starters Circuit Breaker C10A&NT
21
J170
ELECTRICAL 3, IPC-Control (Diagram VCSS11) J160
J1 / J2
4
J150
J7, J122 J11, J112
1
14
3 2 6
15
5
16
13
FIGURE; Electrical 3
PARTS LIST COVERING FIGURE „ Electrical 3 “ DIAGRAM NO.
ORDER BY PART NO.
QTY.
DESCRIPTION
A403
IPC HTC MKV-0
1
IPC-Control
2
IBMM20
1
...IBM-Motherboard
3
STDMO20
1
...STD-Motherboard
4
IBMSTD20
1
...IBM-STD-Adapter
5
STD/CPU586
1
...PENTIUM CPU AP-545V 233MHz
6
IBM-VGA
1
...VGA-Controller
J1 / J2
STD/IO3220
1
...I/O-Interface
J150
STD/4AD30
1
...Digital-Analog Interface (Spindle Torque Controller)
J170
STD/SODA30
1
...Digital-Analog Interface (Feed Torque Control)
J160
STD/SODA30
1
...Digital-Analog Interface (Spindle Speed Control)
J7, J122
STD/SMCIO 422-S
1
...Motor controller inc. Interrupt (Feed Control)
J11, J112
STD/SMCIO 422-S
1
...Motor controller inc. Interrupt (Stroke Control)
13
C6510020
1
...LCD-Sender SIL (new)
14
IPC-Netzteil
1
...IPC-Supply
15
HDD 350M
1
...Harddisk drive
16
FD 1.44M
1
...Floppy drive
Version: WAAGAD10
22
ELECTRICAL 4 (Diagram VCSS11)
15 20
2
14 16
6
19
18 17
11 13
5
10
3
12
7
8 4 9
FIGURE O; Electrical 4
23
ELECTRICAL 4 (Diagram VCSS11)
PARTS LIST COVERING FIGURE „O“ ITEM NO. 1
DIAGRAM NO.
A401
Panel HTC-VC-45 FP HTC MKV-1
2 3
A7005
4
A7003
4
A7003
5
LQ10D321
7
A7007
8
A7008
T402
E271-2210
STC3TG10
SNP9541
C6510120
12 13
K2021
14
S717
14
S717
15
S1031
16
S1033, S1034
16
S1033, S1034
17
S1035, S1036
17
S1035, S1036
18
S1037
18
S1037
19
S1038
19
S1038
20
S1039
20
S1039
1
1
PPCKBW10
10
1
LQOB128
CXA-LO612-VSL
STC3TK10
9
1
1
HTC-TOUCH4
6
QTY.
LQ10D321 IN
E274HL-683 (OBSOLETE)
6
11
ORDER BY PART NUMBER
C9-A41X (24VDC) ZB4-BS54
ZB4-BZ104
1 1 1 1 1 1 1 1 1 1 1 1
XB4-BD53
1
ZB4-BA38
2
ZB4-BZ101 ZB4-BA38
ZB4-BZ101 ZB4-BA38
ZB4-BZ101 ZB4-BA48
ZB4-BZ102 ZB4-BA68
ZB4-BW0B61
DESCRIPTION Operator Panel
Front plate with Foil and Frame Color LCD-Display TFT
Back light Inverter S/N until 1744
Back light Inverter S/N 1748 and up Back light
Touch screen
Touch screen including Frame Touch Controller
Numeric Keyboard
Functions Keyboard F1 – F10 Keyboard Point
Panel-Power Supply LCD-Receiver SIL Relays (COMAT)
Emergency Stop Switch Contacts
Feed Switch
Including Contacts 2 2 2 1 1 1 1 1 1
Key Left / Right GREEN Contact
Acknowledge Key GREEN Contact
Start Key GREEN Contact
Stop Key RED Contact
Reset Key BLUE Contact
24
PNEUMATIC SYSTEM (HTC-2)
25
PNEUMATIC SYSTEM
PARTS LIST COVERING FIGURE „ Pneumatic System “ ITEM NO. 1 2 3 4 5 6 7 8 11
ORDER BY PART NUMBER EAW2000-F02D
IS1000E-2FO2Y-X215 K8-10-50
AN200-KM10
SX5000-52-1A
QTY.
1 1 1 1 1
SX5000-51-1A
1
SY5140-5LOU
1
SX5000-50-1A-C6 SY5440-5LOU
DESCRIPTION Filter Regulator
Air Pressure Switch Manometer Filter
End-Plate left Supply-Plate
Ground Plate 1
5/2 Air Valve Y2004 (Carriage Release)
5/3 Air Valve Y2002/Y2003 (Tool Support)
12
SY5440-5LOU
1
5/3 Air Valve Y2007/Y2008 (Optional Automatic Size Control)
13
SX5000-53-1A
1
End-Plate right
EVM130-F01-00
1
14 15
VJ10-51-A-20
Plug with LED
3/2 Air Valve mechanical
26
PF-401 FILTER UNIT (Optional)
NOTE: The setting of the HIGH PRESSURE RELIEF VALVE is: 45 psi (3.1 bar) The setting of the LOW PRESSURE RELIEF VALVE is: 10 psi (0.7 bar) FIGURE; PF-401 FILTER UNIT
27
PF-401 FILTER UNIT
PARTS LIST COVERING FIGURE „ PF-401 FILTER UNIT “ ITEM NO. 1 2 3 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 not shown not shown
ORDER BY PART NUMBER CK-1279A CK-1389A CK-5724 CK-5721 PF-405 PF-243
PF-246A PF-244 PF-261
PF-270A PF-259A PF-426A
PPP-152A PPP-154A PPP-168A PPP-195A PPP-196A PPP-197A PPP-198A PPP-199A PPP-200A PPP-201A PPP-204A PPP-205A PPP-209A
PPP-M445 PPP-208A PF-110-4* PPP-37A PPP-39A PPP-43A PPP-45A PF-440A
QTY.
3 1 1 1 1 2 2 2 2 2 2 1 3 2 1 1 2 4 1 1 1 1 1 1 2 2 1 1 1 1 1 1 1
DESCRIPTION Street Elbow (3/4 NPT) Pkg. of 1 Relief Valve (High Pressure) Pump Motor (50Hz) Pump Motor (60Hz) Canister Cover
Air Vent Pkg. of 1 Clamp Ring Clamp
Tee Handle Pkg. of 1 Draincock Pkg. of 1 Hose
Nipple (3/4 NPT) Pkg. of 1
Side Outlet Elbow (3/4 NPT) Pkg. of 1 Reducer Coupling (3/4 to 1“) Nipple (3/4 NPT x 4 “Long)
Street Tee (3/4 NPT) Pkg. of 1
Swivel Adapter (3/4-14 NPT) Pkg. of 1 Valve (3 Way) Shutoff Valve
Nipple (3/4-14 NPT x 3 Long) Tee (3/4-14 NPT)
Nipple (3/4-14 NPT x 5-3/4 Long) Nipple (3/4-14 NPT x 6-1/2 Long) Coupling (3/4 NPT) Coupling
Relive Valve (Low Pressure)
Filter Elements (10-Micron) Pkg. of 4 Hose Assembly Hose Assembly Hose Assembly Hose Assembly
Intake Strainer & Hose Assembly
Note: If 5 micron filter elements are required, order PF-105-4.
28
*
NOTES
29
NOTES
® SUNNEN reserves the right to change or revise specifications and product design in connection with any feature of our products contained herein. Such changes do not entitle the buyer to corresponding changes, improvements, additions, or replacements for equipment, supplies or accessories previously sold. Information contained herein is considered to be accurate based on available information at the time of printing. Should any discrepancy of information arise, Sunnen recommends that the user verify the discrepancy with Sunnen before proceeding.
SUNNEN PRODUCTS LIMITED
No. 1 Centro, Maxted Road Hemel Hempstead, Herts HP2 7EF ENGLAND Phone: ++ 44 1442 39 39 39 Fax: ++ 44 1442 39 12 12 www.sunnen.co.uk e-mail:
[email protected]
SUNNEN AG
SUNNEN PRODUCTS COMPANY 7910 ManchesterRoad • St. Louis, MO 63143 U.S.A. Phone: 314-781-2100 Fax: 314-781-2268 U.S.A. Toll-Free Sales and Service Auto: 1-800-772-2878 • Ind: 1-800-325-3670 International Division - Telex: 4312052 SUNNEN PRODSTL
http://www.sunnen.com e-mail:
[email protected]
PRINTED IN U.S.A.
0606
Fabrikstrasse 1 8586 Ennetaach-Erlen, Switzerland Phone: ++ 41 71 649 33 33 Fax: ++ 41 71 649 34 34 www.sunnen.ch e-mail:
[email protected]
SHANGHAI SUNNEN MECHANICAL CO., LTD.
889 Kang Qiao East Road, PuDong Shanghai 201319, P.R. China Phone: 86 21 5 813 3322 Fax: 86 21 5 813 2299 www.sunnensh.com e-mail:
[email protected]
SUNNEN ITALIA S.R.L.
Viale Stelvio 12/15 20021 Ospiate di Bollate (MI) Italy Phone: 39 02 383 417 1 Fax: 39 02 383 417 50 www.sunnenitalia.com e-mail:
[email protected] © COPYRIGHT SUNNEN® PRODUCTS COMPANY 2006, ALL RIGHTS RESERVED
