Preview only show first 10 pages with watermark. For full document please download

X4045 Enus 4045 Tatchalugp

   EMBED

Share

Transcript

Tatch-A-Cleat® Tatch-A-Lug® and Tatch-A-Peg® Installation Instructions Tatch-A-Cleat® Tatch-A-Lug® and Tatch-A-Peg® Installation Instructions TOOLS REQUIRED: TOOLS REQUIRED: • Hammer • Flexco® #1 Punch or Drill • Screwdriver • Hammer • Flexco® #1 Punch or Drill • Screwdriver Tatch-A-Lug Tatch-A-Peg Tatch-A-Lug Tatch-A-Peg 1. Punch 1/4" hole in belt with Flexco #1 punch or drill. 1. Punch 1/4" hole in belt with Flexco #1 punch or drill. 2. Attach Peg or Lug with fastener set; #10-24 zinc plated machine screw and special countersunk washer. (Also available in stainless steel.) 2. Attach Peg or Lug with fastener set; #10-24 zinc plated machine screw and special countersunk washer. (Also available in stainless steel.) 2525 Wisconsin Avenue • Downers Grove, IL 60515-4200 • USA Tel: (630) 971-0150 • Fax: (630) 971-1180 • E-mail: [email protected] 2525 Wisconsin Avenue • Downers Grove, IL 60515-4200 • USA Tel: (630) 971-0150 • Fax: (630) 971-1180 • E-mail: [email protected] Visit www.flexco.com for other Flexco locations and products. Visit www.flexco.com for other Flexco locations and products. ©2015 Flexible Steel Lacing Company. Tatch-A-Cleat®, Tatch-A-Lug® and Tatch-A-Peg® are registered trademarks. 10/15. X4045 ©2015 Flexible Steel Lacing Company. Tatch-A-Cleat®, Tatch-A-Lug® and Tatch-A-Peg® are registered trademarks. 10/15. X4045