Transcript
X90+ 24 Channel L1/L2 GPS Receiver KEY FEATURES 24 Channel L1/L2 GPS Receiver Easy-to-Learn & Simple-to-Use 4 GB Internal Memory Low Power Consumption Compact, Rugged, Lightweight & Submersible IP67 Advanced Technology & Integrated Design Easy Data Download via USB Two-Year Warranty
The dual frequency X90+ GPS receiver was designed to enable every surveyor to access high precision, robust performance and reliable technology without the high price associated with other GPS systems. The X90+ breaks the price barrier for centimeter accuracy GPS positioning and provides a quick return on your investment compared to equivalent dual frequency GPS receivers presently on the market. Just position the X90+ and turn it on, the unit will automatically start recording GPS data and will continue storing data until the receiver is turned off. Advanced Technology There are four LED lights on the X90+. The RED LED shows the unit is on, the BLUE LED shows the unit is tracking satellites (blinks once for each satellite), the GREEN LED blinks when data is received from the serial port, and the YELLOW LED blinks each time data is stored. The X90+ receiver acts just like a USB flash drive on your Windows computer, there is no special cables or drivers needed.
Integrated Design The X90+ bundles simplicity, reliability, accuracy and affordability into a single integrated system that is perfect for static GPS observations. The lightweight and compact design makes the X90+ easy for one person to carry, set-up and manage. The X90+ receiver integrates all components (e.g., GPS engine, antenna with built-in ground plane, and battery) into a single package.
CGO Software The optional Geomatic Office (CGO) software is a desktop application software for post processing GNSS data. CGO was designed to work for both static and Post Processing Kinematic (PPK) surveys. X90+ Bundles The X90+ can be bundled in various configurations. Contact MSI Support for more information on a system solution for your project.
Designed for OPUS The X90+ is a simple, low-cost, L1/L2 GPS receiver specifically designed to use the National Geodetic Survey’s Online Positioning User Service (OPUS). The X90+ is customized to automate data submission to OPUS for sub-centimeter level post processing anywhere in the United States and this service is available at NO CHARGE.
For additional information: MSI Positioning Systems, LLC 4195 South Lee Street, Ste H Buford, Georgia 30518-8020 Tel: 678-765-7824 Fax: 678-804-3448
[email protected]
MSI Surveying Systems
OPUS requires minimal user input and utilizes NGS’ software to compute the coordinates of the occupied point based on the NGS Continuously Operating Reference Station (CORS) Network. The resulting positions are accurate and consistent with the NSRS (National Spatial Reference System). After the user submits a file to NGS a solution is returned via email in a very short time. Recently NGS introduced OPUS PROJECT which will allow users to submit multiple baseline files and process them using CORS sites in a true GPS network solution.
GNSS Two Meter Collapsible Tripod 6121-10/6121-20 MSI Price $895/$795
Product #
Description
MSRP
2190-01
X90+ GPS Static Receiver
$ 3,995
6550-00
12V External Battery Kit
$ 475
7190-45
CGO Office Software
$ 490
Printed: November 14, 2014
X90+ Dual Frequency 24 Channel GPS Receiver Technical Specifications X90+
GPS Receiver Type
24 Channels GPS 12x L1, 12x L2 Advanced Multipath Mitigation - Optimized for low elevation satellite tracking
Update Rate
50 Hz
Cold Start Time
< 90s typical
Warm Start Time
< 30s typical
Hot Start Time
< 10s typical
Maximum Speed
1,850 kph (999 kts)
Post Processing Accuracy STATIC SBAS (WAAS) Autonomous
RMS (67%) H: 5mm + 1ppm V: 10mm + 1ppm < 0.3 m < 1.2 m
Communications Serial Ports
10 pin Lemo Connector (RS323 & USB)
USB
X90+ Receiver acts like a USB external hard drive
Protocol
RINEX and HCN outputs for GPS raw data
Data Storage
4 GB Internal Memory
Power External Power Input
9 - 18 VDC
Power Consumption
± 2.6 W
Battery Capacity
2200mAh
Battery Life
Up to 6 hours
Environmental/Mechanical Environmental Specification Dimensions & Weight
Operating temp: -22°F to 140°F (-30°C to +60°C) Storage temp: -40°F to 158°F (-40°C to 70°C) Humidity: 100% (condensing) 3.35” x 7.85” (85 x 200 mm) 49 oz. (1.4 kg)
Regulations
CE
Rugged Features
Water & dust proof: IP67 Drop spec: 2.0 m (6.6 ft.) drop Shock: Survives a 2 meter drop onto concrete
Specification subject to change without notice. Battery performance will vary based on software applications
MSI Surveying Systems
Printed: November 14, 2014
