Transcript
kitsound.co.uk
XDOCK2 CLOCK RADIO SPEAKER DOCK USER MANUAL
1
JB.2526 / Made in China. © KitSound™ 2013 Christchurch, Dorset. BH23 4FL
1
1
We are cr af tspeople. We are musicians. We are KitSound ™ And we all commit ourselves to achieving one shared goal: Bringing people closer to their music. By truly understanding music we stay true to its craft. Pure, rich, incredible sound. We’ll settle for nothing less.
2
3
At KS we believe your music deserves to be showcased on great quality products that don’t cost the earth. We might not all share the same taste in music (the ferocious disputes on music forums prove that), but whether it’s Irish folk, death metal or any number of obscure genres which seem to be multiplying by the minute, the artists responsible for connecting with you through their craft have bared their souls to do so. And we think that’s worth celebrating.
4
5
Box contents
Bottom view 11. Battery Compartment
•
XDock2 • AC adapter • Instruction manual
Functions Top view 1. Power/Mode 2. Menu/Play/Stop 3. Vol – 4. Vol + 5. Down 6. Up 7. Shhhh! (snooze/sleep)
1
2
3
4
5 6
11
7
Front view 12. iPhone/iPod Dock Connector 13. LCD Screen
Rear view 8. Master Power Switch 9. DC 5 V IN 10. Aux-In
8
6
9
10
12
13
7
Screen icons 1. Aux icon 2. Alarm 1 on 3. FM indicator 4. Alarm 2 on 5. Radio icon 6. iPod/iPhone icon 7. Sleep 8. Buzzer icon 9. Shhhh!/ZZZ display 10. MEM display 11. Time/alarm display
8
5
1
AUX
2
1
3 4
2
7
6
RADIO
SLEEP BUZZER
AM PM FM MEM
10
8
11
9
Quick start Installing the AC adapter • Locate the DC Input Jack (9) • Insert the AC adapter cable into this jack • Now plug the AC adapter into your mains socket Installing the backup batteries for clock and alarm settings In order to offer consistent clock settings and alarm functions, the unit uses a backup battery system. This means that in the event of a power failure, all the settings of unit will remain saved. The display will NOT remain lit, but the time and date settings will be temporarily maintained. The alarm, will not sound when the unit is powered only by the backup batteries. –
ake sure the connection between the DC adapter and the unit is secure. This is important, because during battery M replacement it is possible for all settings to be lost if the clock and alarm have already been set
–
Locate the battery compartment on the bottom of the unit and open
–
I nsert two “AAA” batteries, following the correct polarity (+/-) drawings inside the battery compartment. For longer battery life, alkaline batteries are suggested. Please note that new and used batteries should not be mixed. Likewise, alkaline, standard (carbon- zinc) or rechargeable (nickel-cadmium) batteries should not be used together
9
Basic use Turn the XDock2 on • Firstly, make sure the AC adapter is connected and that the main power switch on the rear of the unit is in the ‘ON’ position • Now press and release the ‘Power/Mode’ (1) button NOTE: Pressing this button again will cycle through the Aux/iPod/iPhone and Radio modes (explained later) Put the XDock2 into standby mode • Press and hold the Power/Mode (1) button until the display dims Set the clock Simply dock your iPod or iPhone and the XDock2 will automatically adopt the exact same time. Alternatively: •
ith the XDock2 in standby mode, press and release the ‘Menu’ (2) button. The hour digit will now be flashing W • Press the ‘Down’ (5) or ‘Up’ (6) button to decrease or increase the hours and press the ‘Menu’ (2) button to confirm your setting. The minute digits will now be flashing. Press the ‘Down’ (5) or ‘Up’ (6) button to decrease or increase the minutes and either press the ‘Menu’ (2) button or wait for a few seconds to save the time Alarm1 • Put the XDock2 into standby mode • Press (don’t hold) the ‘Vol-‘ (3) button and the Alarm 1 icon will flash • Press the ‘Up’ (6) or ‘Down’ (5) buttons to select between buzzer, iPod or radio to wake you up, followed by the ‘Vol-‘ (3) to confirm • Press the ‘Up’ (6) or ‘Down’ (5) buttons to change the hours, followed by the ‘Vol-‘ (3) to confirm • Press the ‘Up’ (6) or ‘Down’ (5) buttons to change the minutes, followed by the ‘Vol-‘ (3) to confirm • The alarm is now set
10
Alarm 2 • Put the XDock2 into standby mode • Press (don’t hold) the ‘Vol+‘ (4) button and the Alarm 2 icon will flash • Press the ‘Up’ (6) or ‘Down’ (5) buttons to select between buzzer, iPod or radio to wake you up, followed by the ‘Vol+‘ (4) to confirm • Press the ‘Up’ (6) or ‘Down’ (5) buttons to change the hours, followed by the ‘Vol+‘ (4) to confirm • Press the ‘Up’ (6) or ‘Down’ (5) buttons to change the minutes, followed by the ‘Vol+‘ (4) to confirm • The alarm is now set Snooze Press the ‘Shhhh!’ (7) button. The alarm will then go off and will resume again in nine minutes. NOTE: The alarm will repeat every day until it is reset. If you have selected to be woken up with your iPod/iPhone but have not docked it, you will be woken with the buzzer. In order to wake to your iPhone or iPod, it must be docked and powered off. If it is in the play mode, no alarm will sound. If your iPhone or iPod has less than one hour of songs, put it in repeat mode. Turn off the alarm • Press the Power/Mode (1) button Cancel the alarm(s) you have set With the XDock2 in standby mode, press the Vol– (3) / Vol+ (4) button until the desired alarm icon does not show on the LCD display.
11
Play your music • To listen to music, dock your iPod or iPhone into the XDock2. Your music will start playing automatically • To pause your music, press the ‘Menu‘ (2) button. To resume playback, press it again • To adjust the volume, press Vol+ (4) and Vol- (3) • To go to the next or previous track, use the ‘Up’ (6) or ‘Down’ (5) button. To search the current track using high speed forward or rewind, press and hold ‘Up’ or ‘Down’ while the track is playing Connect other audio devices You can still listen to any other audio player that is not an iPod or iPhone on the XDock2, by using the Aux-In jack, located on the rear of XDock2.
Listen to the radio For the best FM radio clarity, fully extend the wire antenna, located on the rear of the XDock2. It is important not to alter, obstruct or attach other antennas to this wire antenna. • To turn the radio on, press the ‘Power/Mode’ (1) button until the radio icon appears on the LCD screen. Tune in a
desired station, press the ‘Up’ (6) or ‘Down’ (5) button to search manually • Press and hold ‘Up’ (6) or ‘Down’ (5) until the numbers start changing to auto scan for the next station • To save the station to a preset, press and hold the ‘Menu’ (2) button until the MEM icon flashes on the screen,
then press ‘Up’ (6) or ‘Down’ (5) to save it into a channel from 1 to 10. Press the ‘Menu’ (2) button to confirm • To listen to the preset station when in radio mode, press the ‘Menu’ (2). The MEM icon will be lit and the display will
show a ‘CH’ with a number next to it. Select the preset by pressing ‘Up’ (6) or ‘Down’ (5) and ‘Menu’ (2) to confirm
• Insert the plug of a 3.5 mm audio cable into the HEADPHONE or LINE-OUT jack on your audio device, then insert
the other end of the cable into the Aux-In (10) jack, located on the rear of XDock2 • To put the XDock2 into the aux mode, press the ‘Power/Mode’ (1) button until the aux icon appears • Turn your device on, press play, and enjoy your music
12
13
Sleep • To enter into sleep mode, press the ‘Shhhh!’ button on the top of the XDock2 while listening to your iPod or the radio • Cycle through to choose from 90 mins to 10 mins • The unit will automatically turn off after the selected time • To adjust the sleep time, press the ‘Shhhh!’ button again and choose from 10 to 90 minutes • To cancel the sleep time, press the ‘Shhhh!’ button repeatedly until it flashes ‘OFF’ • To stop listening at any time, press and hold the Power/Mode (1) button
Care for your XDock2 Please DON’T – Get the XDock2 wet – Drop the XDock2 as this will invalidate your warranty – Open up the XDock2. There are no user serviceable parts inside – Use any other mains adapter than the one supplied – Expose the XDock2 to extreme temperatures or rapid changes of hot to cold or vice versa
Specifications •
Dock connector: lightning Alarms: 2 • Snooze time: 9 mins • Frequency response: 100 Hz – 20 kHz • Backup battery: 2 x AAA •
Troubleshooting We hope you’ve now got all the information you need to get started, but if you’re having problems with anything, please feel free to contact us at:
[email protected]
Please DO – Clean the XDock2 with a soft dry cloth and no detergents
14
15
