Transcript
XE295 Elliptical OWNER’S MANUAL Please carefully read this entire manual before operating your new elliptical
TABLE OF CONTENTS Product Registration
1
Important Safety Instructions
2
Important Electrical Instructions
3
Important Operation Instructions
3
XE295 Assembly Instructions
4
Features
9
Console Operation
11
Programmable Features
14
Using Heart Rate Transmitter
20
General Maintenance
22
Manufacturer’s Limited Warranty
23
ATTENTION This elliptical is intended for residential use only and is warranted for this application. Any other application voids this warranty in its entirety.
Congratulations on your new elliptical and welcome to the Spirit family! Thank you for your purchase of this quality elliptical trainer from Spirit Manufacturing, Inc. Your new elliptical was manufactured by one of the leading fitness manufacturers in the world and is backed by one of the most comprehensive warranties available. Through your dealer, Spirit will do all we can to make your ownership experience as pleasant as possible for many years to come. If not purchased direct from Spirit, the local dealership where you purchased this elliptical is your administrator for all Spirit warranty and service needs. Their responsibility is to provide you with the technical knowledge and service personnel to make your experience more informed and any difficulties easier to remedy. Please take a moment at this time to record the name of the dealer, their telephone number, and the date of purchase below to make any future, needed contact easy. We appreciate your support and we will always remember that you are the reason that we are in business. Please complete and mail your registration card today and enjoy your new elliptical trainer. Yours in Health, Spirit Manufacturing, Inc. Name of Dealer Dealer Phone # Purchase Date
PRODUCT REGISTRATION RECORD YOUR SERIAL NUMBER Please record the Serial Number of this fitness product in the space provided below. Serial Number REGISTER YOUR PURCHASE The self-addressed product registration card must be completed in full and returned to Spirit Manufacturing, Inc. You can also go to www.spiritfitness.com/warranty.asp under the support tab to register online.
XE295_20101110
1
XE295 Elliptical
IMPORTANT SAFETY INSTRUCTIONS WARNING - Read all instructions before using this appliance. DANGER - To reduce the risk of electric shock disconnect your Spirit elliptical from the electrical outlet prior to cleaning and/or service work. WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons, install the elliptical on a flat level surface with access to a 110-volt, 15-amp grounded outlet with only the elliptical plugged into the circuit. DO NOT USE AN EXTENSION CORD UNLESS IT IS A 14AWG OR BETTER, WITH ONLY ONE OUTLET ON THE END: Do not operate elliptical on deeply padded, plush or shag carpet. Damage to both carpet and elliptical may result. Keep children away from the elliptical. There are obvious pinch points and other caution areas that can cause harm. Keep hands away from all moving parts. Never operate the elliptical if it has a damaged cord or plug. If the elliptical is not working properly, call your dealer. Keep the cord away from heated surfaces. Do not operate where aerosol spray products are being used or where oxygen is being administered. Sparks from the motor may ignite a highly gaseous environment. Never drop or insert any object into any openings. Do not use outdoors. To disconnect, turn all controls to the off position, then remove the plug from the outlet. Do not attempt to use your elliptical for any purpose other than for the purpose it is intended. The hand pulse sensors are not medical devices. Their purpose is to provide you with an approximate measurement in relation to your target heart rate. Use of a chest transmitter strap is a much more accurate method of heart rate analysis . Various factors, including the user’s movement, may affect the accuracy of heart rate readings. The pulse sensors are intended only as exercise aids in determining heart rate trends in general. Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for use on your elliptical. Quality athletic shoes are recommended to avoid leg fatigue. SAVE THESE INSTRUCTIONS - THINK SAFETY!
XE295 Elliptical
2
IMPORTANT ELECTRICAL INSTRUCTIONS WARNING! NEVER remove any cover without first disconnecting AC power. If voltage varies by ten percent (10%) or more, the performance of your elliptical may be affected. Such conditions are not covered under your warranty. If you suspect the voltage is low, contact your local power company or a licensed electrician for proper testing. NEVER expose this elliptical to rain or moisture. This product is NOT designed for use outdoors, near a pool or spa, or in any other high humidity environment. The operating temperature specification is 40 to 120 degrees Fahrenheit, and humidity is 95% non-condensing (no water drops forming on surfaces).
IMPORTANT OPERATION INSTRUCTIONS NEVER operate this elliptical without reading and completely understanding the results of any operational change you request from the computer. Understand that changes in resistance do not occur immediately. Set your desired resistance level on the computer console and release the adjustment key. The computer will obey the command gradually. NEVER use your elliptical during an electrical storm. Surges may occur in your household power supply that could damage elliptical components. Unplug the elliptical during an electrical storm as a precaution. Use caution while participating in other activities while pedaling on your elliptical; such as watching television, reading, etc. These distractions may cause you to lose balance which may result in serious injury. Do not use excessive pressure on console control keys. They are precision set to function properly with little finger pressure.
3
XE295 Elliptical
XE295 ASSEMBLY INSTRUCTIONS PRE-ASSEMBLY 1. Using a razor knife (Box Cutter), cut the banding straps that wraparound the carton, then cut around the dotted line at the bottom of the box; lift the box over the unit and unpack. 2. Carefully remove all parts from carton and inspect for any damage or missing parts. If damaged parts are found, or parts are missing, contact your dealer immediately. 3. Locate the hardware package. The hardware is separated into four steps. Remove the tools first. Remove the hardware for each step as needed to avoid confusion. The numbers in the instructions that are in parenthesis (#) are the item number from the assembly drawing for reference.
ASSEMBLY TOOLS
#108. Phillips Head Screwdriver
#107. Short Phillips Head Screw Driver
#106. 13/14mm Wrench
XE295 Elliptical
#109. 12/14mm Wrench
4
1
CONSOLE MAST ASSEMBLY 1. Locate the Console Mast (12) and Console Mast Cover (41) and slide the Cover onto the Mast as far as it will go. Make sure the Console Mast Cover (41) is facing the correct way. 2. At the top opening of the Main Frame (1), there is a Computer Cable (31) tied to a twist tie wire. Feed the twist tie wire and Computer Cable (31) into the bottom of the Console Mast (12) and out of the opening at the top. 3. Install the Console Mast (12) into the receiving bracket on the top of the Main Frame (1). NOTE: there is one bolt already installed in the receiving bracket that will engage with the slot at the bottom of the Console Mast. This needs to be tightened last, after the three other console mast bolts. 4. Place a Split Washer (96) onto the Hex Head Bolt (60) and hand tighten through the left side of the console mast. Place a Curved Washer (84) onto each Hex Head Bolt (103) and thread both into the front of the console mast tube. Fasten these front bolts as tight as possible with the wrench (106). Next firmly tighten the two left side bolts with the same wrench. NOTE: The Computer Cable (31) runs through the Console Mast (12). Be careful not to pinch this cable during this procedure because it may affect the electrical functions of the console. 5. Connect the two Hand pulse cables (36), Resistance cable (124), and Computer Cable (31) to the back of the console (30). Do not force the connectors; they will only fit one way and are different sizes to prevent confusion. Store the excessive cable in the Console Mast tube (12). 6. Attach the Console (30) to the bracket of the console mast tube with four Phillips Head Screws (66). Tighten the screws with the Phillips Head Screw Driver (108).
HARDWARE
#96. 3/8” Split Washer (1 pc)
#84. 3/8” x 23 Curved Washer (2 pcs)
#66. M5 x 10mm Phillips Head Screw (4 pcs)
5
#103. 3/8” x 3/4” Hex Head Bolt (2 pcs)
#60. 3/8” x 2-1/4” Hex Head Bolt (1 pc)
XE295 Elliptical
2
SWING ARM ASSEMBLY 1. Slide two Wave Washers (81) onto both the Left and Right Console Mast axle. 2. Slide the Swing Arms (L) and (R), (10 & 11) onto the appropriate side of the axle. Note: Make sure the arms are attached as shown in the illustration. 3. Place a Flat Washer (97) onto each Hex Head Bolt (103) and fasten in the end of the left and right axle. Tighten with the wrench (106). 4. Slide the grommet (123) onto the Resistance cable (124); connect the two Resistance cables (124 & 125) and store the excess cable in the Console Mast tube (12) after snapping the grommet into the hole of the console mast tube.
HARDWARE
#97.3/8” x 30mm Flat Washer (2 pcs)
XE295 Elliptical
#81. 25mm Wave Washer (4 pcs)
#103. 3/8” x 3/4” Hex Head Bolt (2 pcs)
6
#123. Grommet (1 pc)
3
CONNECTING ARM ASSEMBLY 1. Untie the twist tie that holds each bushing (22) to the Connecting Arm end. Align the hole in the end of the Connecting Arms (L & R) (8 & 9) with the hole in the bracket of the Swing Arms (L) and (R), (10 & 11). The Connecting Arm ends should be inside of the Swing Arm (L) and (R), (10 & 11) brackets. Slide a Hex Head Bolt (104) through each Swing Arm (L) and (R), (10 &11) bracket and each Connecting Arm end. 2. Slide a Flat Washer (80) onto each bolt, then fasten the arms together by tightening a Nyloc Nut (71) to each bolt using the wrenches provided (109 & 106) wrenches.
HARDWARE
#80. 5/16” x 20 x1.5T Flat Washer (2 pcs)
#104. 5/16” x 1-1/4” Hex Head Bolt ( 2 Pcs)
#71. 5/16” Nyloc Nut (2 pcs)
7
XE295 Elliptical
4
PLASTIC PARTS ASSEMBLY 1. Mate the Connecting Arm Covers (R) (58) with the Connecting Arm Covers (L) (58-1) on left and right Connecting Arms (8 & 9). Make sure these covers are oriented the correct way. There is an arrow ^ mark on the inside. Fasten together with four Phillips Head Screws (105) and four Sheet Metal Screws (87). Tighten with the Short Phillips Head Screw Driver (107). Then mate the Connecting Arm Covers (R) (57) with (L) (57-1) on Swing Arm (L) (10) and Swing Arm (R) (11), respectively. Fasten together with four Phillips Head Screws (105) and four Sheet Metal Screws (87). Tighten with the Short Phillips Head Screw Driver (107). 2. Fasten the two Wheel Covers (52) to the roller sets with four M5x15mm Phillips Head Screws (105). Tighten with the Phillips Head Screw Driver(108). 3. Attach the left side cover (19) and right side cover (20) to the mid-stabilizer tube with two Phillips Head Screws (105). Attach the right side cover (20) and left side cover (19) to the rear stabilizer tube with two Phillips Head Screws (105). Tighten all four screws with the Phillips Head Screw Driver (108). Then attach the Front Stabilizer Cover (49) with two Phillips Head Screws (105). Tighten with the Phillips Head Screw Driver (108). 4. Install the Front Handle Bar Covers (L & R) (54 & 55) and Rear Handle Bar Covers (L & R) (54-1 & 55-1) over the Handle Bars axle connections with four Sheet Metal Screws (87) on each side. Tighten with the Phillips Head Screw Driver (108). 5. Look closely at the four floor levelers underneath the middle and rear of the elliptical. If any of these aren’t HARDWARE in contact with the floor, use the wrench (124) to loosen the bottom nut. Once the nut has been loosened, turn the rubber pad clockwise until it makes #87. 3.5 x 12mm #105. M5 x15mm solid contact with the floor. Retighten the bottom nut Sheet Metal Screw Phillips Head Screw to prevent it from moving. (16 pcs) (18 pcs)
XE295 Elliptical
8
FEATURES FOOTPADS Through research performed with a leading sports scientist and physical rehabilitation expert, Spirit engineering has developed a breakthrough in pedal design. No other elliptical, at any price, offers these unique features. The history of elliptical use over the past few years tells us that many users suffer from numb toes while working out on elliptical trainers. Many other users complain of ankle, Achilles tendon, knee and/or hip pain. While researching a solution to these common problems Spirit engineers consulted Richard DeKok, P.T., M.T.C., of St. Bernards Industrial Rehabilitation Center in Jonesboro Arkansas. Together we identified the inherent problem in elliptical designs and developed solutions to solve the problems. What we found is that when you use an elliptical you tend to push outward during the power stroke and not just straight back. This causes stress on the outer part of the foot and throws off the natural alignment of the joints. The second problem we found is that many people tend to stay up on the ball of their foot during the elliptical motion. Our solutions were simple but effective: The first solution was to add a 2-degree inward angle to the footpads. This might sound simple but what it achieves is not. Pedaling an elliptical, no matter how close together the pedals may be, puts the users musculoskeletal system out of neutral alignment. Adding the 2-degree angle positions the user back into a neutral alignment which eases the over stress of the outer ankles, knees, and hips. The second solution was to make the foot pedal adjustable to the user’s style of pedaling the elliptical. We achieved this by adding an adjustment that allows the angle of the footpad to be changed. There are three positions available with a simple pull-pin adjustment located under the footpads (see illustration below). The lowest position will set the footpads at zero (0) degrees, or flat at the bottom of the elliptical stroke. The second position sets the footpad at five (5) degrees and the top position sets the footpads at ten (10) degrees. Because everybody is different, we found there is no one angle that fits every user. Some users are up on the balls of their feet, resulting in numb toes, so we decided to allow the user to adjust the back of the foot pad upward to support the heel, taking the pressure off of the nerves in the balls of the feet and the Achilles tendon. The result was relief from the toes going numb. Some users are uncomfortable at a fixed angle, therefore we added the adjustable pedal angles so they could find one that feels best for them. A great side benefit of the adjustable footpad angle is that you end up working the muscles of the lower extremities in a different way. At the highest angle, you will work the quadriceps more. At the lowest angle, you work the hamstrings and gluts harder. 9
XE295 Elliptical
CONSOLE ADJUSTABILITY The way the console is mounted allows up to 20% adjustability of the viewing angle. This accommodates a more diverse population in terms of height of the user. MUSCLE ACTIVATION FIGURE There is an anatomical figure located at the top of the console. This figure will light all areas that are activated when using the elliptical trainer. These will light up during any of the programs. You can control which muscles are activated by changing up the pedal pattern or switching your hand position during the manual program. The pre-set programs will determine which muscles are activated by automatically adjusting the incline. Generally the following guidelines hold true: • • •
The upper body lights will activate when you are either holding onto the swing arms or at anytime yours hands aren’t holding onto the pulse grip sensors The lower body lights will activate in three degrees of engagement: Green represents minimal muscle involvement, Amber represents medium involvement, and Red represents full or heavy activation. These are the different scenarios for lower body muscle activation Forward pedal rotation Gluteals & Quadriceps are Amber; Hamstrings & Calves are Green Reverse pedal rotation Incline: Calves, Hamstrings, and Quadriceps are Amber; Gluteals are Green
HEART RATE BAR GRAPH The console LCD screen will display your current heart rate anytime a pulse is detected. The Bar Graph, located left of the LCD screen, will show your current heart rate % in relation to your projected maximum heart rate, which is determined by your age that you entered during the programming phase of any of the 10 programs. The significance of the bar graph colors are as follows: • • •
50-60% of maximum is Gold 65-80% of maximum is Gold and Green 85-90% or more is Gold, Green, and Red
XE295 Elliptical
10
OPERATION OF YOUR CONSOLE GETTING FAMILIAR WITH THE CONTROL PANEL
MUSCLE PROFILE
XE295 CONSOLE
SPEAKER DATA DISPLAY (RPM, Calories, Time, Distance, Pulse) HEART RATE PROFILE DOT MATRIX
(Level, Program Profiles, And Lap Track)
PROGRAM BUTTONS
(Manual, Hill, Fat Burn, Strength, Interval, 2 User, 2HR)
MESSAGE CENTER
(Program Name, Speed, Watts, Laps, and Segment Time)
COOLING FAN CONTROL KEYS
POWER UP When the A.C. power cord is connected to the Elliptical, the console will automatically power up. If there is no input to the console for 20 minutes the console will go to stand-by mode. In stand-by mode the console display will turn off. To turn the console on press any key. When initially powered on the console will perform an internal self-test. During this time all the lights will turn on. When the lights go off, the Message Center will show the software version (i.e.: VER 1.0). The distance window shows the distance in miles and the time window shows the total hours of use. The odometer will remain displayed for only a few seconds then the console will go to the start up display. The dot matrix display will be scrolling through the different profiles of the programs and the Message Center will be scrolling the start up message. You may now begin to use the console.
11
XE295 Elliptical
QUICK START This is the quickest way to start a workout. After the console powers up you just press the Start key to begin, this will initiate the Quick Start mode. In Quick Start the Time will count up from zero and the workload may be adjusted manually by pressing the Level Up or Down buttons. The dot matrix display will have only the bottom row lit at first. As you increase the work load more rows will light indicating a harder workout. The fitness bike will get harder to pedal as the rows increase. There are 20 levels of resistance available for plenty of variety. The first 5 levels are very easy workloads and the changes between levels are set to a good progression for de-conditioned users. Levels 6-10 are more challenging, but the increases in resistance from one level to the next remain small. Levels 11-15 start getting tough as the levels jump more dramatically. Levels 16-20 are extremely hard and are good for short interval peaks and elite athletic training.
BASIC INFORMATION The Message Center will initially be displaying the Program name. When in scan mode during a program, speed will be displayed for four seconds, then move on and display Watts (indication of workload). If 100 watts is displayed, you are doing enough work to keep a 100-watt light bulb lit. The data changes to Segment Time, then Laps completed. Pressing the Enter button again will bring you back to the beginning. The Stop button actually has several functions. Pressing the Stop key once during a program will Pause the program for 5 minutes. If you need to get a drink, answer the phone or any of the many things that could interrupt your workout, this is a great feature. To resume your workout during Pause, just press the Start key. If the Stop button is pressed twice during a workout, the program will end and the console will display your Workout Summary (Avg. Speed, Avg. Watts, and Laps completed). If the Stop key is held down for 3 seconds or a third time during the program, the console will perform a complete Reset. During data entry for a program the Stop key performs a Previous Screen or segment function. This allows you to go back to change programming data.
XE295 Elliptical
12
PROGRAM KEYS The Program Keys are used to preview each program. When you first turn the console on you may press each program key to preview what the program profile looks like. If you decide that you want to try a program, press the corresponding program key and then press the Enter key to select the program and enter into the data-setting mode. The elliptical has a built in heart rate monitoring system. Simply grasping the hand pulse sensors on the stationary handle bars or wearing the heart rate transmitter (see Using Heart Rate Transmitter section) will start the Heart Icon blinking (this may take a few seconds). The Pulse Display Window will display your heart rate, or Pulse in beats per minute. The consoles include a built-in fan to help keep you cool. To turn the fan on, press the button on the left side of the console.
PROGRAMMING THE CONSOLE Each of the programs can be customized with your personal information and changed to suit your needs. Some of the information asked for is necessary to ensure the readouts are correct. You will be asked for your Age and Weight. Entering your Age is necessary during the Heart Rate programs to ensure the correct settings are in the program for your Age. Otherwise the work settings could be too high or low for you. Entering your Weight aides in calculating a more correct Calorie reading. Although we cannot provide an exact calorie count, we do want to be as close as possible. CALORIE NOTE: Calorie readings on every piece of exercise equipment, whether it is in a gym or at home, are not accurate and tend to vary widely. They are meant only as a guide to monitor your progress from workout to workout. The only way to measure your calorie burn accurately is in a clinical setting connected to a host of machines. This is because every person is different and burns calories at a different rate. Some good news is that you will continue to burn calories at an accelerated rate for at least an hour after you have finished exercising!
ENTERING A PROGRAM AND CHANGING SETTINGS When you enter a program, by pressing a program key, then Enter key, you have the option of entering your own personal settings. If you want to workout without entering new settings, then just press the Start key. This will bypass the programming of data and take you directly to the start of your workout. If you want to change the personal settings then just follow the instructions in the Message Center. If you start a program without changing the settings, the default or saved settings will be used. NOTE: Age and Weight default settings will change when you enter a new number. So the last Age and Weight entered will be saved as the new default settings. If you enter your Age and Weight the first time you use the elliptical, you will not have to enter it every time you work out unless either your Age or Weight changes, or someone else enters a different Age and Weight.
13
XE295 Elliptical
PROGRAMMABLE FEATURES MANUAL The Manual program works as the name implies, manually. This means that you control the workload and not the computer. To start the Manual program, follow the instructions below or just press the Manual button, then the Enter button and follow the directions in the Message Center. 1. Press the Manual key, then press the Enter key. 2. The Message Center will ask you to enter your Age. You may enter your age, using the Up and Down keys, then press the Enter key to accept the new value and proceed on to the next screen. 3. You are now asked to enter your Weight. You may adjust the Weight value using the Up and Down keys, then press Enter to continue. 4. Next is Time. You may adjust the Time and press Enter to continue. 5. Now you are finished editing the settings and can begin your workout by pressing the Start key. You can also go back and modify your settings by pressing the Stop key. NOTE: At any time during the editing of Data you can press the Stop key to go back one level, or screen. 6. Once the program starts you will be at level one. This is the easiest level and it is a good idea to stay at level one for a while to warm up. If you want to increase the work load at any time press the Up key; the Down key will decrease the work-load. 7. During the Manual program you will be able to scroll through the data in the Message Center by pressing the Enter key. 8. When the program ends you may press Start to begin the same program again or Stop to exit the program or you can save the program you just completed as a custom user program by pressing a User key and following the instructions in the Message Center.
XE295 Elliptical
14
PRESET PROGRAMS The bike has five different programs that have been designed for a variety of workouts. These five programs have factory preset work level profiles for achieving different goals. Hill
XE295 RESISTANCE
Fat Burn
XE295 RESISTANCE
Cardio
XE295 RESISTANCE
Strength
XE295 RESISTANCE
Interval
XE295 RESISTANCE
This program follows a triangle or pyramid type of gradual progression from approximately 10% of maximum effort (the level that you chose before starting this program) up to a maximum effort which lasts for 10% of the total workout time, then a gradual regression of resistance back to approximately 10% of maximum effort.
This program follows a quick progression up to the maximum resistance level (default or user input level) that is sustained for 2/3 of the workout. This program will challenge your ability to sustain your energy output for an extended period of time.
This program presents a quick progression up to near maximum resistance level (default or user input level). It has slight fluctuations up and down to allow your heart rate to elevate, and then recover repeatedly, before beginning a quick cool down. This will build up your heart muscle and increase blood flow and lung capacity.
This program has a gradual progression of resistance up to 100% of maximum effort that is sustained for 25% of workout duration. This will help build strength and muscular endurance in the lower body and gluts. A brief cool down follows.
This program takes you through high levels of intensity followed by recovery periods of low intensity. This program utilizes and develops your “Fast Twitch” muscle fibers which are used when performing tasks that are intense and short in duration. These deplete your oxygen level and spike your heart rate, followed by periods of recovery and heart rate drop to replenish oxygen. Your cardiovascular system gets programmed to use oxygen more efficiently.
15
XE295 Elliptical
PROGRAMMING PRESET PROGRAMS 1. Select the desired program button then press the Enter key. 2. The Message Center will ask you to enter your Age. You may adjust the age setting, using the Level Up and Down keys, then press the Enter key to accept the new number and proceed on to the next screen. 3. You are now asked to enter your Weight. You may adjust the Weight value using the Level Up and Down keys, then press Enter to continue. 4. Next is Time. You may adjust the time and press enter to continue. 5. Now you are asked to adjust the Max Resistance Level. This is the peak exertion level you will experience during the program. Adjust the level and then press Enter. 6. Now you are finished editing the settings and can begin your workout by pressing the Start key. You can also go back and modify your settings by pressing the Stop key to go back one screen. 7. If you want to increase or decrease the resistance at any time during the program, press the Level Up or Down keys on the console or the right handlebar (swing arm). This will change the resistance settings of the entire profile, although the profile picture on the screen will not change. The reason for this is so that you can see the entire profile at all times. If the profile picture is changed, it also would be distorted and not a true representation of the actual profile. When you make a change to the resistance, the Message Center will show the current column and program maximum levels of work. 8. During the program you will be able to scroll through the data in the message window by pressing the Enter key. 9. When the program ends the Message Center will show a summary of your workout. The summary will be displayed for a short time, then the console will return to the start-up display.
XE295 Elliptical
16
CUSTOM USER DEFINED PROGRAMS There are two customizable User programs that allow you to build and save your own workout. The two programs, User 1 and User 2, operate exactly the same way so there is no reason to describe them separately. You can build your own custom program by following the instructions below or you can save any other preset program you complete as a custom program. Both programs allow you to further personalize it by adding your name. 1. Press the User 1 or User 2 key. The Message Center will show a welcome message. If you had previously saved a program the message will contain your name. Then press the Enter key to begin programming. 2. When you press Enter, the Message Center will show “Name - A”, if there is no name saved. If the name “David” had been previously saved the Message Center will show “Name - David” and the D will be blinking. If there is a name saved you can change it or you may press the Stop key to keep the name and continue to the next step. If you want to enter a name use the Up and/or the Down key to change the first letter then press Enter to save the first letter and continue to the next letter. When you have finished entering the name press the Stop key to save the name and continue to the next step. 3. The Message Center will ask you to enter your Age. You may enter your age, using the Level Up and Down keys, then press the Enter key to accept the new value and proceed on to the next screen. 4. You are now asked to enter your Weight. You may adjust the weight value using the Up and Down keys or the numeric key pad, then press Enter to continue. 5. Next is Time. You may adjust the time and press Enter to continue. 6. Now you are asked to adjust the Resistance Level for each segment of the profile. 7. Now the first column will be blinking and you are asked to adjust the resistance level for the first segment(SEGMENT > 1) of the workout by using the Level Up key. When you finish adjusting the first segment, or if you don’t want to change, then press Enter to continue to the next segment. 8. The next segment will show the same workload resistance level as the previously adjusted segment. Repeat the same process as the last segment then press enter. Continue this process until all twenty segments have been set. 9. The Message Center will then tell you to press Enter to save the program. After saving the program the Message Center says “New program saved” then will give you the option to Start or modify the program. Pressing Stop will exit to the start up screen.
17
XE295 Elliptical
HEART RATE PROGRAMS The old motto, “no pain, no gain”, is a myth that has been overpowered by the benefits of exercising comfortably. A great deal of this success has been promoted by the use of heart rate monitors. With the proper use of a heart rate monitor, many people find that their usual choice of exercise intensity was either too high or too low and exercise is much more enjoyable by maintaining their heart rate in the desired benefit range. To determine the benefit range in which you wish to train, you must first determine your Maximum Heart Rate. This can be accomplished by using the following formula: 220 minus your age. This will give you the Maximum Heart Rate (MHR)for someone of your age. To determine the effective heart rate range for specific goals you simply calculate a percentage of your MHR. Your Heart rate training zone is 50% to 90% of your maximum heart rate. 60% of your MHR is the zone that burns fat while 80% is for strengthening the cardio vascular system. This 60% to 80% is the zone to stay in for maximum benefit. For someone who is 40 years old their target heart rate zone is calculated: 220 – 40 = 180 (maximum heart rate) 180 x .6 = 108 beats per minute (60% of maximum) 180 X .8 = 144 beats per minute (80% of maximum) So for a 40 year old the training zone would be 108 to 144 beats per minute. If you enter your age during programming the console will perform this calculation automatically. Entering your age is used for the Heart Rate programs. After calculating your MHR you can decide upon which goal you would like to pursue. The two most popular reasons for, or goals, of exercise are cardiovascular fitness (training for the heart and lungs) and weight control. The black columns on the chart above represent the MHR for a person whose age is listed at the bottom of each column. The training heart rate, for either cardiovascular fitness or weight loss, is represented by two different lines that cut diagonally through the chart. A definition of the lines’ goal is in the bottom left-hand corner of the chart. If your goal is cardiovascular fitness or if it is weight loss, it can be achieved by training at 80% or 60%, respectively, of your MHR on a schedule approved by your physician. Consult your physician before participating in any exercise program. With all Spirit Heart Rate program elliptical machines you may use the heart rate monitor feature without using the Heart Rate program. This function can be used during manual mode or during any of the nine different programs. The Heart Rate program automatically controls resistance at the pedals.
XE295 Elliptical
18
RATE OF PERCEIVED EXERTION Heart rate is important but listening to your body also has a lot of advantages. There are more variables involved in how hard you should workout than just heart rate. Your stress level, physical health, emotional health, temperature, humidity, the time of day, the last time you ate and what you ate, all contribute to the intensity at which you should workout. If you listen to your body, it will tell you all of these things. The rate of perceived exertion (RPE), also know as the Borg scale, was developed by Swedish physiologist G.A.V. Borg. This scale rates exercise intensity from 6 to 20 depending upon how you feel or the perception of your effort. The scale is as follows: Rating Perception of Effort 6 Minimal 7 Very,very light 8 Very,very light + 9 Very light 10 Very light + 11 Fairly light 12 Comfortable 13 Somewhat hard 14 Somewhat hard + 15 Hard 16 Hard + 17 Very hard 18 Very hard + 19 Very,very hard 20 Maximal You can get an approximate heart rate level for each rating by simply adding a zero to each rating. For example a rating of 12 will result in an approximate heart rate of 120 beats per minute. Your RPE will vary depending up the factors discussed earlier. That is the major benefit of this type of training. If your body is strong and rested, you will feel strong and your pace will feel easier. When your body is in this condition, you are able to train harder and the RPE will support this. If you are feeling tired and sluggish, it is because your body needs a break. In this condition, your pace will feel harder. Again, this will show up in your RPE and you will train at the proper level for that day.
19
XE295 Elliptical
USING HEART RATE TRANSMITTER How to wear your wireless chest strap transmitter: 1. Attach the transmitter to the elastic strap using the locking parts. 2. Adjust the strap as tightly as possible as long as the strap is not too tight to remain comfortable. 3. Position the transmitter with the logo centered in the middle of your torso facing away from your chest (some people must position the transmitter slightly left of center). Attach the final end of the elastic strap by inserting the round end and, using the locking parts, secure the transmitter and strap around your chest. 4. Position the transmitter directly below the pectoral muscles. 5. Sweat is the best conductor to measure very minute heart beat electrical signals. However, plain water can also be used to pre-wet the electrodes (2 ribbed oval areas on the reverse side of the belt and both sides of the transmitter). It’s also recommended that you wear the transmitter strap a few minutes before your work out. Some users, because of body chemistry, have a more difficult time in achieving a strong, steady signal at the beginning. After “warming up”, this problem lessens. As noted, wearing clothing over the transmitter/strap doesn’t affect performance. 6. Your workout must be within range - distance between transmitter/receiver – to achieve a strong steady signal. The length of range may vary somewhat but generally stay close enough to the console to maintain good, strong, reliable readings. Wearing the transmitter directly on bare skin assures you of proper operation. If you wish, you may wear the transmitter over a shirt. To do so, wet the areas of the shirt that the electrodes will rest upon. Note: The transmitter is automatically activated when it detects activity from the user’s heart. Additionally, it automatically deactivates when it does not receive any activity. Although the transmitter is water resistant, moisture can have the effect of creating false signals, so you should take precautions to completely dry the transmitter after use to prolong battery life (estimated transmitter battery life is 2500 hours). The replacement battery is Panasonic CR2032.
ERRATIC OPERATION Caution! Do not use this elliptical for Heart Rate programs unless a steady, solid Actual Heart Rate value is being displayed. High, wild, random numbers being displayed indicate a problem. Areas to look for interference which may cause erratic heart rate: 1. 2. 3. 4. 5.
Microwave ovens, TV’s, small appliances, etc. Fluorescent lights. Some household security systems. Perimeter fence for a pet. Some people have problems with the transmitter picking up a signal from their skin. If you have problems try wearing the transmitter upside down. Normally the transmitter will be oriented so the SPIRIT logo is right side up. 6. The antenna that picks up your heart rate is very sensitive. If there is an outside noise source, turning the whole machine 90 degrees may de-tune the interference. 7. Another Individual wearing a transmitter within 3’ of your machine’s console.
If you continue to experience problems contact your dealer.
XE295 Elliptical
20
HEART RATE PROGRAM OPERATION Note: You must wear the heart rate transmitter strap for these programs
Both programs operate the same, the only difference is that HR1 is set to 60% and HR2 is set to 80% of the maximum heart rate. They both are programmed the same way. To start an HR program follow the instructions below or just select the HR1 or HR2 program, then the Enter button and follow the directions in the Message Center. After selecting your heart rate target the program will attempt to keep you at or within 3-5 heart beats per minute of this value. Follow the prompts in the Message Center to maintain your selected heart rate value. 1. Press the HR 1 or HR 2 key then press the Enter key. 2. The Message Center will ask you to enter your Age. You may enter your age, using the Level Up and Down keys, then press the Enter key to accept the new value and proceed on to the next screen. 3. You are now asked to enter your Weight. You may adjust the weight value using the Level Up and Down keys, then press Enter to continue. 4. Next is Time. You may adjust the time and press Enter to continue. 5. Now you are asked to adjust the Heart Rate Target. This is the heart rate level you will strive to maintain during the program. Adjust the level using the Level Up and Down keys, then press Enter. Note: The heart rate that appears is based on the % you accepted in Step 1. If you change this number it will either increase or decrease the % from Step 1.
6. Now you are finished editing the settings and can begin your workout by pressing the Start key. You can also go back and modify your settings by pressing the Stop key. NOTE: At any time during the editing of Data you can press the Stop key to go back one screen.
7. If you want to increase or decrease the workload at any time during the program press the Level Up or Down key. This will allow you to change your target heart rate at any time during the program. 8. During the HR 1 or HR 2 programs you will be able to scroll through the data in the Message Center by pressing the Enter key. 9. When the program ends you may press Start to begin the same program again or Stop to exit the program or you can save the program you just completed as a custom user program by pressing a User key and following the instructions in the Message Center.
21
XE295 Elliptical
GENERAL MAINTENANCE 1. Wipe down all areas in the sweat path with a damp cloth after each workout. 2. If a squeak, thump, clicking or rough feeling develops the main cause is most likely one of two reasons: I. i. The hardware was not sufficiently tightened during assembly. All bolts that were installed during assembly need to be tightened as much as possible. It may be necessary to use a larger wrench than the one provided if you cannot tighten the bolts sufficiently. I cannot stress this point enough; 90% of calls to the service department for noise issues can be traced to loose hardware or the rear rails being dirty. II. ii. Dirt build-up on the rear rails and polyurethane wheels are also a source of noise. Noise from build-up on the rails can cause a thumping sound that you would swear is coming from inside the main body of the machine because noise travels, and is amplified, in the tubing of the frame. Clean the rails and wheels with a lint free cloth and rubbing alcohol. Stubborn build-up can be removed with your thumbnail or a non-metallic scraper, like the back edge of a plastic knife. After cleaning, apply a small amount of lubricant on the rails with your fingers or a lint free cloth. You only need a thin coat of lubrication, wipe off any excess. 3. If squeaks or other noises persist, check that the unit is properly leveled. There are 4 leveling pads on the bottom of the rear rails, use a 14mm wrench (or adjustable wrench) to adjust the levelers.
MAINTENANCE MENU IN CONSOLE SOFTWARE
The console has built in maintenance/diagnostic software. The software will allow you to change the console settings from English to Metric and turn off the beeping of the speaker when a key is pressed for example. To enter the Maintenance menu (may be called Engineering mode, depending on version) press and hold down the Start, Stop and Enter keys. Keep holding the keys down for about 5 seconds and the message center will display ALTXXXX Engineering mode. Press the Enter button to access the menu below: a. Key Test (will allow you to test all the keys to make sure they are functioning) b. Display Test (tests all the display functions) c. Functions (Press enter to access settings) i. Sleep Mode (Turn on to have the console power down automatically after 20 minutes of inactivity) ii. Safety (Off. To turn safety on, press and hold Start and Enter at the same time) iii. Motor Test (Press enter to run the resistance motor up and down in a continuous loop. Display shows level setting and position sensor reading. Press stop to end test.) iv. Beep (Turn on or off the beep when a key is pressed) v. Units (Set to English or Metric display readings) vi. ODO reset (reset the odometer) vii. Pause Mode (Turn on allow 5 minutes of pause, turn off to have the console pause indefinitely) d. Security (Allows you to lock the keypad so no unauthorized use is allowed; Off; to turn On, press Level Up, then the Enter key) e. Factory Settings (Access only allowed by manufacturing) f. Exit g. Calibration: If the console shows an error for the incline/ramp, re-calibrating the system may resolve the problem. Press and hold the Start & resistance level UP keys for 5 seconds. The Message Center will show Calibration; press enter. The calibration process is automatic and the system will restart when finished.
XE295 Elliptical
22
MANUFACTURER’S LIMITED WARRANTY ELLIPTICAL WARRANTY - Effective September 15, 2010
Spirit Fitness Inc. warrants all its elliptical parts for a period of time listed below from the date of retail sale, as determined by sale receipt, or in the absence of a sales receipt eighteen (18) months from the original factory shipping date. Spirit’s responsibilities include providing new or remanufactured parts, at Spirit’s option, and technical support to our independent dealers and servicing organizations. In the absence of a dealer or service organization, these warranties will be administered by Spirit Fitness directly to a consumer. The warranty period applies to the following components: Warranty Frame Lifetime
Brake Lifetime
Parts 10 Years
Labor 1 Year
NORMAL RESPONSIBILITIES OF THE CONSUMER This warranty applies only to products in ordinary household use, and the consumer is responsible for the items listed below: 1. The warranty registration card must be completed and returned to the address listed on the card within 10 days of the original purchase to validate the manufacturer’s limited warranty. 2. Proper use of the elliptical in accordance with the instructions provided in this manual 3. Proper installation in accordance with instructions provided with the elliptical and with all local electric codes. 4. Proper connection to a grounded power supply of sufficient voltage, replacement of blown fuses, repair of loose connections or defects in house wiring. 5. Expenses for making the elliptical accessible for servicing, including any item that was not part of the elliptical at the time it was shipped from the factory. 6. Damages to the elliptical finish during shipping, installation or following installation. 7. Routine maintenance of this unit as specified in this manual. EXCLUSIONS This warranty does not cover the following: 1. CONSEQUENTIAL, COLLATERAL, OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL EXPENSES RESULTING FROM ANY BREACH OF THIS WRITTEN OR ANY IMPLIED WARRANTY. Note: Some states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation or exclusion may not apply to you. 2. Service call reimbursement to the consumer. Service call reimbursement to the dealer that does not involve malfunction or defects in workmanship or material, for units that are beyond the warranty period, for units that are beyond the service call reimbursement period, for elliptical not requiring component replacement, or elliptical not in ordinary household use. 3. Damages caused by services performed by persons other than authorized Spirit Fitness service companies; use of parts other than original Spirit parts; or external causes such as corrosion, discoloration of paint or plastic, alterations, modifications, abuse, misuse, accident, improper maintenance, inadequate power supply, or acts of God. 4. Products with original serial numbers that have been removed or altered. 5. Products that have been: sold, transferred, bartered, or given to a third party. 6. Products that do not have a warranty registration card on file at Spirit Fitness Inc. Spirit Fitness reserves the right to request proof of purchase if no warranty record exists for the product. 7. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE. 8. Product use in any environment other than a residential setting. 9. Warranties outside of North America may vary. Please contact your local dealer for details. SERVICE Keep your bill of sale. Twelve (12) months from the date on the bill of sale or eighteen (18) months from the date of factory shipping as determined by the serial number establishes the labor warranty period should service be required. If service is performed, it is in your best interest to obtain and keep all receipts. This written warranty gives you specific legal rights. You may also have other rights that vary from state to state. Service under this warranty must be obtained by following these steps, in order: 1. Contact your selling authorized Spirit Fitness dealer. OR 2. Contact your local authorized Spirit Fitness service organization. 3. If there is a question as to where to obtain service, contact our service department at (870) 935-1107. 4. Spirit’s obligation under this warranty is limited to repairing or replacing, at Spirit’s option, the product through one of our authorized service centers. All repairs must be preauthorized by Spirit. If the product is shipped to a service center freight charges to and from the service center will be the customer’s responsibility. For replacement parts shipped while the product is under warranty, the customer will be responsible for shipping and handling charges. Forin-home service, the customer will be responsible for a trip charge. There will be an additional trip charge if the customer is located over 100 miles from the nearest service center. 5. The owner is responsible for adequate packaging upon return to Spirit. Spirit is not responsible for damages in shipping. Make all freight damage claims with the appropriate freight carrier. DO NOT SHIP ANY UNIT TO OUR FACTORY WITHOUT A RETURN AUTHORIZATION NUMBER. All units arriving without a return authorization number will be refused. 6. For any further information, or to contact our service department by mail, send your correspondence to: Spirit Fitness, Inc. P.O. Box 2037 Jonesboro, AR 72402-2037 Product features or specifications as described or illustrated are subject to change without notice. All warranties are made by Spirit Fitness, Inc. This warranty applies only in the 50 states of the U.S.A.
23
XE295 Elliptical
