Transcript
XIO 9050HSM
Dual HD/SD Digital Signal QA Monitoring Card
XIO 9050 HSM is aimed to enhance the video& audio supervision quality and system maintenance, the
detection equipment was used to capture the real-‐time node signal and form intelligent professional signal
monitoring and warning through data analysis. Sending the alarm information by SNMP trap once there is a fault detected i s becoming the best choice to build a monitoring and measurement system.
signal QA detection card based on XIO-‐3U intelligent network frame platform, it adopts The XIO 9050HSM
DSP technique, and each channel supports 2 channels SDI/HDSDI self-‐adaptive input, can detect more than
20 kinds of common parameter of digital signal, with inner WEBSEVER it can be visited by remote computer
through IE browser. It can be adjust by third-‐party software or Gefei MagiCon, the comprehensive monitoring software.
on the module indicate the status of input signal and power supply, in order to let the user The LED lights immediately. It supports SNMP. It can be real-‐time managed and monitored by XIO NET, know the status the Network M anagement Module, via Ethernet.
Key Features
Ø Provide an individual Ref interface and frame sync processing
50, 525i 60, 720p, 1080i, 1080p and automatic detection of input format Ø Support 625i Ø Monitoring 18 kinds of SDI signal quality parameters
1RU chassis rack interface
Ø Monitoring video format and AFD information
Ø Monitoring audio phase ,logo lost
Ø Support m aster and slave sync. phase offset detect Ø Support hot swap plug
lights to indicate the status of signals and power supply Ø Provide LED Ø Support SNMP, and can be real-‐time managed and monitored by XIO NET via Ethernet in broadcasting system, studios and other professional fields Ø Widely used
3RU chassis rack interface
WEB page for alarm display and parameters configuration
XIO 9050HSM
HD/SD Signal QC Real-‐time Monitoring
Monitoring parameters Item
Monitoring content
Specification
1
Slave BB status
BB exist or not
2
Slave BB standard
PAL or NTSC
3
Slave BB offset
Phase offset between master BB and slave BB. Master BB can be connected on from XIO NET
4
SDI input status
SDI signal exist or not
5
Video format
625i60 /525i50 /720p50 /720p60 /1080p24 /1080p25 /1080p30 /1080i 50 /1080i60 /1080p50 /1080p60 /I
6
AFD
Display embedded AFD type
7
SDI lock status
Lock or not
8
H/V phase value
Read H/V phase value
9
Black
Threshold adjustable, accurate for one frame
10
Freeze
Threshold adjustable, accurate for one frame
11
Color Bar
75%or 100% level, accurate for one frame
12
Color frame
7 kinds of single coloe,75%or 100% level, accurate for one frame
13
Brightness over standard
Support threshold setting
14
Chrome over standard
Support threshold setting
15
Audio channel position
Embedded audio channel and distribution
16
Audio mute
Threshold adjustable, accurate for one frame
17
Audio over standard
Threshold adjustable, accurate for one frame
18
AP-‐EDH
For SD-‐SDI signal source, AP-‐EDH error or not
19
FF-‐EDH
For SD-‐SDI signal source, AP-‐EDH error or not
20
Y-‐CRC
For HD-‐SDI signal source, Y-‐CRC error or not
21
C-‐CRC
For HD-‐SDI signal source, C-‐CRC error or not
22
Line Number
For HD-‐SDI signal source, Line number error or not
Technical Specification
Application
BB input： Interface： 1*BNC NTSC/PAL ,Tri-‐level Video Input/out： Interface：2*HD-‐SDI input, 2*HD-‐SDI output BNC, 75 ohms SD：625i 50, 525i 60; HD：720P 50/60, 1080I 50/59.94/60, 1080P 30/29.97/25/24/23.98 1080P 50/59.94/60
Control: 1*RJ45 10/100/1000Mbps Status indicator Signal status indicator, Power indicator (Indicate by shining or extinguishing of the green LED)
Ordering Information XIO 9050 HSM HD/SD SDI Signal Real-‐time Monitoring Module
