Transcript
XPW4413D0 RS-232 / Powered USB / USB Device Hub
Introduction SUNIX DevicePort® product is network-attached USB & RS-232 hubs that enables the mixing of USB and serial peripheral devices remoted connect to a Windows based PC/Tablet over a Local Area Network. Relocating the host PC/Tablet to a remote location translates to smaller workstations, enabling deployment without a local PC in kiosks, ATMs, restaurant kitchens, manufacturing lines or any hostile or non-secure area where having a local PC is not practical. SUNIX DevicePort® built-in DPL2000Q High-Performance Ethernet-UART controller and exclusive I/O Redirection Technology. SUNIX DevicePort® creates physical USB and COM ports in system with real time data communication features. User can access USB and serial peripheral devices easily without complicated software configuration. SUNIX XPW4413D0 is one of product within DevicePort® product family that is designed for retail POS application. With four Powered USB (24V & 12V) and four RS-232 ports, user can easily attach USB and serial channels with your Windows Tablet or small form factor desktop over Ethernet network. By connecting to standard Wi-Fi router, all connected devices go to wireless solution. SUNIX DevicePort® is the best and creative solution for commercial automation and retail POS applications.
Note: SUNIX iDevicePort® USB channel is compatible with bulk or interrupt type USB devices such as bar-code scanners, printers, fingerprint scanners, pole displays, card readers, and more. USB disk and Isochronous USB devices are not supported (e.g. USB-Audio/Video devices).
Features
Expands RS-232 serial and Powered USB ports over Ethernet networking.
COM port and USB interface are fully compatible with existing applications.
Built-in SUNIX DevicePort DPL2000Q High-Performance Ethernet-UART controller.
SUNIX DevicePort proprietary Ethernet I/O Redirection Technology. -
Windows hosts can connect the peripheral device remotely through the network.
-
Physical USB and COM ports create in the Windows device manager.
-
Real-Time data transmitting without complicated IP settings.
ESD protection for all serial signal lines meeting IEC-61000-4-2 standard.
Support for Microsoft Windows 7, 8.x and 10 operating systems.
Application
Specifications Serial Communication Interface
RS-232
Baud rate
50bps ~921.6Kbps
Controller
SUNIX DPL2000Q
Stop bit
1, 1.5, 2
BUS
Ethernet
Parity
even, odd, none, mark, space
No. of Port
4-port
Flow Control
Xon/Xoff (software)
FIFO
1Kbyte Hardware /per port
Connector
DB9 Male
Signal
RS-232: DCD, TxD, RxD, RTS, CTS, DTR, DSR, GND, RI
Powered USB Interface
Powered USB
Speed
Data Transfer rate of 1.5, 12, and 480Mbps
Controller
SUNIX DPL2000Q
Connector
Powered USB Female
BUS
Ethernet
Signal
USB 2.0 / 1.1
No. of Port
Power
4-port
Output
Ethernet Communication No. of ports
1-port, Ethernet Port
Speed
10/100 Mbps, auto MDI/MDI
Connector
RJ45
Power Requirements Input Voltage
24V DC
Power Consumption
90W@24VDC
Connector
Mini DIN (3 pin)
Driver Support Microsoft Client
7 / 8.x / 10 (X86/X64)
Microsoft Server
2003 / 2008 / 2012R2 (X64)
Standard USB 2.0 Port： +5VDC / Maximum 0.5A / each port Powered USB Port： +24VDC / Maximum / 3.0A / each port +12VDC / Maximum / 3.0A / each port
Environment Operation
0 to 60°C (32 to 140°F)
Temperature Operation Humidity
5 to 95% RH (non-condensing)
Storage Temperature
-20 to 85°C (-4 to 185°F)
Physical Characteristics Housing
ABS, PC, Metal
Weight
460 g 190 x 123 x 46 (mm), 7.49 x 4.72 x 1.81 (inch)
Dimensions
Pin Assignment
RS-232 PIN
DB9M
DCD
1
RxD
2
TxD
3
DTR
4
GND
5
DSR
6
RTS
7
CTS
8
RI
9
Powered USB
Packing Contents XPW4413D0 - RS-232 / Powered USB / USB Device Hub Quick installation guide
