Transcript
XTL
Classic Line TECHNICAL FEATURES
LF loudspeaker system GENERALITIES
The Classic Line speakers have undergone a careful restyling: the wood thickness of Canadian birch plywood has been reduced from 19 to 15 mm and the 4 wheels have been removed from the rear of the cabinet. Specially designed to reproduce the first octaves of the audio band, XTL is the perfect complement for the XTH speaker systems of the Classic Line system. Its dimensions have been developed to facilitate clusters creation in combination with other X-Treme speaker systems.
System configuration Power handling RMS Power handling Music Power handling Peak Frequency response (-3 dB) Nominal impedance Axial sensitivity (1W@1m) Continuous SPL (@1m) Peak SPL (@1m) Recommended frequency cut
woofer 850 W 1700 W 3400 W 50÷150 Hz 8 Ohm 101 dB 131 dB 137 dB 150 Hz
Transducers LF sub system Nominal impedance Nominal power handling Sensitivity (1W@1m)
1x18” 8 Ohm 850 W 97 dB
All measurements have been taken in the Sound Corporation research laboratories.
COMPONENTS
XTL includes a 18” woofer with an enameled copper coil to ensure the maximum resistance to thermal overloads (300°C). The membrane is water-repellent, resistant to extreme conditions of humidity and temperature. The drop-forged aluminium basket is equipped with a thermal heat sink.
CABINET
The speaker system enclosure, built in 0,6” (15 mm) thick birch plywood, is resistive to any mechanical stress without vibrating. It has been designed to facilitate a cluster configuration of different systems. A wheelboard is available on request.
Frequency response
Impedance response
Physical
In compliance with European Standards
Input connectors
2xNL4FC speakon
Cabinet
birch plywood
Finish
HDSCTM
Suspension system
ESAH proprietary rigging
Dimensions (WxHxD)
580x580x620 mm
Net weight
42,5 kg
- Certified by Italian Quality Institute
via Monti Urali, 33 - 42100 Reggio Emilia (Italy) • tel. +39 0522 557735 • fax +39 0522 391268 • e-mail:
[email protected]
