Transcript
XTP SYSTEMS
AA I/O sizes from 4x4 up to 16x16, or 32x32 AA Easy to set up and configure AA Extremely high performance switching and transmission AA Dependable signal switching and robust system reliability
A Completely Integrated Solution for Digital AV Switching and Distribution
AA Advanced 24/7 system monitoring and hot‑swappable modular components AA SpeedSwitch® Technology provides exceptional switching speed for HDCP‑encrypted content
Introduction Extron XTP Systems® provide a completely integrated switching
The XTP CrossPoint 1600 is configurable from 4x4 to 16x16, while
and distribution solution for multiple digital and analog formats.
the XTP CrossPoint 3200 supports from 4x4 up to 32x32. The
They support local connectivity, as well as extended transmission
modular design of the XTP CrossPoint® matrix switchers allow
capability to send high resolution video, audio, bidirectional RS-232
systems to be customized for each application. The high data-rate
and IR, Ethernet, and power up to 330 feet (100 m) over a shielded
digital backplane designed into the matrix switcher ensures full
CATx cable.
compatibility with the highest resolution signals currently in use,
These modular systems are expandable, from 4x4 up to 16x16 or 32x32, and can be populated with a wide variety of XTP CP I/O
while also providing a future-ready upgrade path for new formats with higher resolutions.
matrix boards. Input and output boards provide direct HDMI, DVI,
Input and Output Board Options
VGA, video, and audio connections to support local sources and
A family of four-input boards are available for XTP Systems, including
displays or signal extension to remote endpoints when using
the XTP CP input board for receiving video, audio, RS-232 and IR
XTP transmitters and receivers. The matrix switcher can also
control, and Ethernet over a shielded CATx cable from remote
provide power to a remote XTP device over the same twisted pair
XTP transmitters, as well as XTP CP input boards for connecting
cable.
local HDMI, DVI, or analog VGA sources. The VGA input board
®
To configure, operate, and monitor the system in real time, userfriendly control software offers a complete view of all XTP devices from a computer. With hot-swappable modular components, a wide selection of XTP transmitters and receivers, and advanced 24/7 system monitoring, XTP Systems are designed to provide continuous, trouble-free operation in the most critical applications. High Performance Matrix Switching XTP Systems are HDCP compliant, and deliver ultra-fast, highly reliable digital switching of HDMI and DVI signals with Extron’s SpeedSwitch® Technology. Other Extron technologies included in XTP Systems are EDID Minder® and Key Minder®. EDID Minder automatically manages EDID communications between source and display devices, and Key Minder authenticates and maintains
features universal analog video inputs that can automatically detect incoming RGBHV, HD component video, S-video, and composite video signals. These signals are converted to digital, and Extron‑exclusive SD Pro processing deinterlaces 480i and 576i signals for compatibility with HDMI and DVI-equipped displays, without the need for additional scalers. The HDMI, DVI, and VGA input boards include analog stereo audio inputs. Select input boards provide downmixing for multichannel audio. Several output boards are available, including the XTP CP output board for transmitting signals over a shielded CATx cable to remote XTP receivers, and XTP CP output boards for local HDMI, DVI, and analog audio output connections to display devices and sound systems.
continuous HDCP encryption between input and output devices to
XTP Transmitters and Receivers
ensure quick and reliable switching in professional AV environments.
XTP Systems include a wide variety of long distance XTP
XTP Systems also accept and digitize a variety of analog video and
transmitters and receivers for sending and receiving video, audio,
audio formats for exceptional system performance.
RS-232 and IR control, Ethernet, and power up to 330 feet (100 m) from the XTP CrossPoint matrix switcher over Extron XTP DTP 24 or a shielded CATx cable. XTP transmitters are available in desktop, floor box and wall mount models that accept HDMI, VGA, or standard definition video. Select models also offer SD Pro processing or can accept multiple inputs and feature automatic input switching. XTP receivers are available in desktop and Decora®-style wallplate models, each with HDMI output and HDMI audio de‑embedding with analog stereo audio outputs. One of the desktop models also features integrated video scaling, so that all incoming video signals can be optimized to a common output rate for the display. The Decora-style wallplate features an HDMI output connector oriented upward at a
90° angle and side-mounted LEDs for power, XTP signal presence, and embedded audio indication. This unique, low-profile wallplate design requires only 1” spacing from the wall to the flat panel display. Enhance AV Device Control with RS-232 and IR Insertion The XTP CrossPoint matrix switcher can be controlled via RS-232, Ethernet, or the USB port on the front panel. With the capability to transmit
XTP CrossPoint 3200
control signals over the same cabling for AV, XTP Systems provide considerable flexibility to control the entire system. Bidirectional RS-232 signals can be inserted from a control system into the Ethernet control port on the matrix switcher, enabling RS-232 control of devices attached to XTP transmitters and receivers.
Integration Convenience Features XTP Systems include numerous integrator-friendly features to simplify system configuration and operation, including the many
Direct bidirectional RS-232 and IR insertion ports are included on all of
features common to Extron matrix switchers such as I/O memory
the XTP transmitters and receivers. They are also on the XTP CP input
presets and the QS-FPC™ - QuickSwitch Front Panel Controller
and output boards. These ports allow, for example, a control system
with tri-color backlit buttons. XTP transmitters and receivers
to insert IR signals into the XTP System in order to control a remote
can be powered over the CATx cabling by the XTP CrossPoint
Blu-ray™ player or display that is connected to an XTP extender.
matrix switcher, speeding up and simplifying installation at remote
All of this flexible system control capability is available using the
endpoints by eliminating the need to provide AC power.
same twisted pair cable to send control signals alongside video,
XTP Systems also provide extensive audio management features,
audio, Ethernet, and power. The end result is a simplified wiring
integrating analog stereo audio alongside digital HDMI audio.
infrastructure that reduces costs and labor.
Extensive signal routing and management options are available,
Extend Ethernet to Expand Network Access and AV Control An Ethernet port accompanies each XTP RJ-45 port on an
including HDMI audio embedding and de-embedding, audio breakaway, and downmixing multi-channel formats.
XTP transmitter or receiver, and XTP CP input and output boards.
Convenient, user-friendly control software for configuring, operating,
These ports can be used to extend Ethernet access from the matrix
and monitoring the system is included. The software provides a
switcher to remote endpoints over the one twisted pair cable,
complete view of the matrix switcher and remote XTP transmitters
without the need to provide additional network drops or
and receivers, and facilitates control and real-time status monitoring
IP addresses. For example, Blu-ray players at source endpoints can
of all XTP devices on a PC desktop. With the software, EDID
receive Internet access from the house LAN that is interfaced into
communication can easily be managed for all devices.
the Ethernet ports of an XTP CP input board. A separate LAN for the control system can be used to control remote displays via the Ethernet ports on the XTP CP output boards.
Designed for Continuous Reliability XTP Systems are designed for optimum performance and 24/7 reliability. A real-time monitoring system continuously provides self-
The Ethernet ports on the XTP CP input and output boards can
diagnostics of the XTP CP input and output boards, XTP links, power
also be connected into a shared house LAN for both system control
supplies, internal fans, and general functions of the system. Each
and network access. This also allows control system devices to be
XTP CP input and output board is hot-swappable so that the matrix
situated at remote endpoints. The capability to extend Ethernet to
switcher can be serviced or reconfigured without powering down the
remote endpoints provides substantial flexibility to set LAN access in
unit. XTP Systems also feature available redundant power supplies to
accordance with end user requirements and IT policy.
ensure continuous, uninterrupted power.
Features I/O sizes from 4x4 up to 32x32
SD Pro processing
The XTP CrossPoint 1600 can be configured up to 16x16, and the XTP CrossPoint 3200 can be sized up to 32x32. Both matrix switchers can be populated with input and output boards to create customized system configurations starting from 4x4, with available I/O sizes in four-input and four-output increments.
Baseband 480i and 576i input video is deinterlaced to ensure compatibility with HDMI and DVI-equipped display devices, without the need for scalers.
Supports transmission of video, audio, bidirectional RS-232 and IR, Ethernet, and remote power over one shielded CATx cable
XTP Systems provide high reliability and maximum performance on an economical and easily installed cable infrastructure.
EDID
MINDER KEY
MINDER
Extron XTP DTP 24 Shielded Twisted Pair cable provides added protection from outside interference and ensures high quality signal transmission Extends 1080p/60 Deep Color, 1920x1200, and 2K signals up to 330 feet (100 meters)
Wide selection of input and output boards
A family of XTP CP input and output boards provide integration for a variety of signal types and formats, enabling system customization for the specific application. RS-232 control via Ethernet insertion
RS-232 control signals can be inserted, via Ethernet from a control system, into the Ethernet control port on each XTP CrossPoint matrix switcher. These signals can then be transmitted to remote endpoints to allow total system control without additional cabling. Bidirectional RS-232 and IR insertion for AV device control
XTP Systems supports digital signal transmission up to 330 feet over a single twisted pair cable and maintains superior image quality at the highest resolutions.
Control signals can be inserted into RS‑232 and IR ports of the XTP CP input and output boards, and the XTP transmitters and receivers. Inserting RS-232 and IR control signals into XTP Systems allows a control system to interface with devices at remote endpoints via the matrix switcher.
High data-rate digital backplane
Remote power to XTP transmitters and receivers
Ensures switching and distribution of video signals without degradation, offering the performance required to maintain signal integrity with the most demanding high resolution signals. Fully digital signal routing
Incoming analog signals are digitized so that a reliable, high quality digital video signal is sent to the output destination.
XTP CrossPoint matrix switchers can power remote XTP transmitters and receivers over the same twisted pair cable for sending AV signals. This avoids the need to separately power XTP devices at remote endpoints. HDCP compliant
XTP Systems are HDCP-compliant, including the matrix switcher and remote endpoints.
Features This is especially useful for mission-critical applications that require continuous system operation. Here is my native resolution and vertical refresh rate.
Audio breakaway Video
OK, sending video to fit your format.
EDID
Output
Ethernet extension
Video EDID Minder
Input
Video EDID Minder
Input
Video EDID Minder
Provides the capability to separate audio signals from their corresponding video signals within the matrix switcher, including HDMI embedded audio. This allows the audio and video signals from one source to be switched to different destinations.
Input
XTP Systems actively manage EDID communication between the display and input sources to ensure consistent, reliable operation.
SpeedSwitch® Technology
Provides exceptional switching speed for HDCP-encrypted content. EDID Minder®
Automatically manages EDID communication between connected idevices. EDID Minder offers the ability to select from pre-stored settings, or choose from user-stored settings and apply to any or all inputs. The technology ensures that all sources power up properly and reliably output content for display. Key Minder®
Continuously verifies HDCP compliance. Key Minder authenticates and maintains continuous HDCP encryption between input and output devices to ensure quick and reliable switching in professional AV environments, while enabling simultaneous distribution of a single source to multiple displays. Modular, field-upgradeable and hot-swappable design
XTP CrossPoint matrix switchers provide substantial flexibility, expandability, and affordability by allowing users to select the configuration required for a system. Additional input and output boards may be added at any time for quick and easy upgradeability or expansion. Hot-swappable components allow the user to replace an input or output board at any time without the need to power down the switcher.
Ethernet access can be extended to remote endpoints over the same twisted pair cable used for AV transmission, avoiding the need to provide additional network drops or switches. This provides convenient Internet access for remote devices as well as integration into Ethernet-based control systems. HDMI compatible
Supported HDMI specification features include date rates up to 6.75 Gbps, Deep Color up to 12-bit, 3D, and HD lossless audio formats. Interface Format Correction
Automatically reformats HDMI source signals for output to a connected DVI display. Active signal and HDCP verification
XTP Systems provide real-time verification of signal presence and HDCP status for each input and output on the matrix switcher, as well as on the XTP transmitters and receivers. This allows for simple, quick and easy signal and HDCP verification through RS-232/RS-422 or Ethernet, providing valuable feedback to a system operator or helpdesk support staff. HDCP Visual Confirmation
A full-screen green signal is sent when HDCP-encrypted content is transmitted to a non-HDCP compliant display, providing immediate visual confirmation that protected content cannot be viewed on the selected display. Automatic color bit depth management
The matrix switcher automatically adjusts color bit depth based on the display EDID, preventing color compatibility conflicts between source and display. Automatic cable equalization
Automatic cable equalization is provided for each HDMI or DVI input to 100 feet (30 meters) at 1920x1200/8-bit color when used with Extron HDMI or DVI Pro cables.
Automatic output reclocking
Reshapes and restores timing of signals at each HDMI or DVI output, enabling transmission over long cables. Ethernet monitoring and control
Engineered to meet the needs of professional AV environments, Ethernet control provides proactive monitoring and system management over a LAN, WAN, or the Internet, using standard TCP/IP protocols. Ethernet control provides for remote selection of input and output ties, adjustment and control of audio input and output levels, and advanced system diagnostics. Redundant power supply
The XTP CrossPoint 3200 includes a redundant power supply for continuous, mission-critical applications where power reliability is crucial. An optional version of the XTP CrossPoint 1600 features a redundant power supply. Global presets
Frequently used I/O configurations may be saved and recalled either from the front panel, serial, USB, or Ethernet control. This time-saving feature allows I/O configurations to be set up and stored in memory for future use. Advanced computer-aided diagnostics
Provide 24-hour self-diagnostics of input/ output boards, primary and redundant power supply voltages, XTP links, and overall functional status of the matrix. Using the Ethernet or RS-232/RS-422 communications port, status monitoring is possible for off-site or unmanned locations, such as government, military, medical, or any other sensitive, 24 hour a day, 7 day a week environments. Front panel security lockout
Prevents unauthorized use in non-secure environments. Compatible with all XTP integrated system products
XTP Systems provide flexible, reliable signal switching and distribution in an integrated solution for multiple digital and analog formats.
Overview Completely integrated solution for digital and analog video XTP Systems feature fully digital signal routing with digital conversion of analog signals.
Configurable from 4x4 to 32x32
Tri-color, backlit buttons
The modular XTP CrossPoint matrix switchers can be appropriately sized to application requirements while allowing for future expansion.
The QS-FPC™ - QuickSwitch Front Panel Controller allows for simple, intuitive matrix switcher operation.
Audio / video routing options AV signals can be routed together or independently, including embedded HDMI audio signals.
Advanced system monitoring Provides continuous selfdiagnostics of the matrix switcher and its essential components, including the primary and redundant power supplies.
HDCP compliant XTP Systems are HDCP‑compliant, and support data rates up to 6.75 Gbps, Deep Color up to 12-bit, 3D, and HD lossless audio formats.
USB configuration port XTP CrossPoint 3200 - Front
Provides convenient user access for setting up, operating, and monitoring XTP Systems.
Audio signal routing and management XTP Systems integrate analog audio alongside digital HDMI audio, with extensive signal routing and management options.
RS-232 and IR insertion Bidirectional control signals can be inserted to control devices at remote endpoints.
RS-232 insertion for system control The entire XTP System, including the matrix switcher and devices at remote endpoints, can be controlled via RS-232 commands inserted into the Ethernet control port.
Ethernet extension Ethernet can be extended to remote endpoints for network access or system control.
High data-rate digital backplane Supports the highest resolution HDMI and DVI signals currently in use, and is ready for future formats with higher resolutions.
Variety of input and output board options XTP CP I/O boards connect to remotely located XTP transmitters and receivers, while HDMI, DVI, VGA, video, and audio boards support local connections.
XTP CrossPoint 3200 - Back
Supports long distance transmission of AV, bidirectional RS-232 and IR, Ethernet, and power over a shielded CATx cable XTP Systems deliver digital signal transmission up to 330 feet (100 meters), including 1080p/60, 1920x1200, and 2K video.
Remote powering XTP CrossPoint matrix switchers can power remote XTP transmitters and receivers over the same twisted pair cable for AV.
XTP CrossPoint Matrix Switchers The Extron XTP CrossPoint matrix switchers are the heart of XTP Systems. They are modular and expandable from 4x4 up to 16x16 or 32x32, and can be populated with input and output boards for long distance transmission over a shielded CATx cable when paired with XTP transmitters and receivers. I/O boards are also available for direct HDMI, DVI, VGA, video, and audio connections to support local sources and displays. XTP CrossPoint matrix switchers deliver robust system reliability with ultra-fast digital video switching, advanced 24/7 system monitoring, and hot-swappable modular components.
XTP CrossPoint 1600 Series Modular Digital Matrix Switchers from 4x4 to 16x16 Features
• Available in I/O sizes from 4x4 to 16x16 • 15.2 Gbps data-rate digital backplane • Compatible with all XTP integrated system products • Fully digital signal routing • Wide selection of input and output boards • RS-232 insertion from the Ethernet control port • Remote power to XTP transmitters and receivers • HDCP compliant • SpeedSwitch® Technology provides exceptional switching speed for HDCP-encrypted content • SD Pro processing provides deinterlacing of standard definition video • EDID Minder® automatically manages EDID communication • Key Minder® continuously verifies HDCP compliance • Automatic color bit depth management • Ethernet extension, monitoring, and control Model Version Description XTP CrossPoint 1600 Frame 5U, 8-slot Frame XTP CrossPoint 1600 Frame 5U, 8-slot Frame w/redundant power
Part Number CALL CALL
XTP CrossPoint 3200 Series Modular Digital Matrix Switchers from 4x4 to 32x32 Features
• Available in I/O sizes from 4x4 to 32x32 • 15.2 Gbps data-rate digital backplane • Compatible with all XTP integrated system products • Fully digital signal routing • Wide selection of input and output boards • RS-232 insertion from the Ethernet control port • Remote power to XTP transmitters and receivers • HDCP compliant • SpeedSwitch® Technology provides exceptional switching speed for HDCP-encrypted content • SD Pro processing provides deinterlacing of standard definition video • EDID Minder® automatically manages EDID communication •K ey Minder® continuously verifies HDCP compliance • Automatic color bit depth management • Redundant power supply Version Description Model XTP CrossPoint 3200 Frame 10U, 16-slot Frame
Part Number CALL
XTP CP I/O Boards The Extron XTP CP input and output boards enable long distance signal transmission between XTP CrossPoint matrix switchers and XTP transmitters and receivers for sending high resolution video, audio, RS-232, and Ethernet up to 330 feet (100 meters) over a shielded CATx cable. They also support direct HDMI, DVI, VGA, video, and audio connections to local sources and displays. XTP CP input and output boards can be mixed and matched to meet system application requirements for supporting sources and displays in local and remote locations, and integrating various digital and analog video formats into a single integrated system. Note: Extron XTP DTP 24 Shielded Twisted Pair cable provides added protection from outside interference and ensures high quality signal transmission.
XTP CP I/O Boards XTP Transmitter and Receiver Boards with IR/RS-232 Insertion Features
• Supports computer video up to 1920x1200, including HDTV 1080p/60 Deep Color and 2K • Bidirectional RS-232 and IR insertion for AV device control • HDCP compliant • SpeedSwitch® Technology provides exceptional switching speed for HDCP-encrypted content • EDID Minder® •K ey Minder® • Ethernet extension • Remote power to XTP transmitters and receivers • XTP CP 4i DMA provides multi-channel audio downmixing Model XTP CP 4i XTP CP 4i DMA XTP CP 4o
Version Description Four Input, XTP Four Input, XTP - Down Mixing Audio Four Output, XTP
XTP CP 4i
XTP CP 4i DMA
XTP CP 4o
Part Number 70-940-01 70-940-02 70-943-01
XTP CP HDMI I/O Boards HDMI Input and Output Boards with Analog Stereo Audio Features
• Supports computer video up to 1920x1200, including HDTV 1080p/60 Deep Color and 2K • HDCP compliant • SpeedSwitch® Technology provides exceptional switching speed for HDCP-encrypted content • EDID Minder® • Key Minder® • Output volume control • Automatic cable equalization • Automatic output reclocking • Provides +5 VDC, 250 mA power on HDMI outputs for external peripheral devices • XTP CP 4i HDMI DMA provides multi-channel audio downmixing Model XTP CP 4i HDMI XTP CP 4i HDMI DMA XTP CP 4o HDMI
Version Description Four Input, HDMI with Stereo Audio Four Input, HDMI - Down Mixing Audio Four Output, HDMI with Stereo Audio
XTP CP 4i HDMI
XTP CP 4i HDMI DMA
XTP CP 4o HDMI
Part Number 70-685-11 70-685-12 70-687-11
XTP CP I/O Boards XTP CP DVI Pro I/O Boards HDCP-Compliant DVI Input and Output Boards with Analog Stereo Audio Features
• Supports computer video up to 1920x1200, including HDTV 1080p/60 Deep Color and 2K • HDCP compliant • SpeedSwitch® Technology provides exceptional switching speed for HDCP-encrypted content
XTP CP 4i DVI Pro
XTP CP 4o DVI Pro
• EDID Minder® •K ey Minder® • Output volume control • Automatic cable equalization • Automatic output reclocking •P rovides +5 VDC, 250 mA power on DVI outputs for external peripheral devices Model XTP CP 4i DVI Pro XTP CP 4o DVI Pro
Version Description Four Input, DVI with Stereo Audio Four Output, DVI with Stereo Audio
Part Number 70-684-11 70-686-11
XTP CP 4i VGA Board Universal Input Board with Analog Stereo Audio Features
• Accepts RGBHV, HD component video, S-video, and composite video • Supports 1920x1200 and HDTV 1080p/60 signals • Automatic input format detection • Analog-to-digital signal conversion • SD Pro processing • EDID Minder® • Local analog stereo audio inputs Model XTP CP 4i VGA
Version Description Four Input, Universal VGA - Stereo Audio
Part Number 70-941-01
XTP CP 4o SA Board Analog Stereo Audio Board Features
• Balanced or unbalanced audio outputs • Audio output volume adjustment and muting Model XTP CP 4o SA
Version Description Four Output, Analog Stereo Audio
Part Number 70-944-01
XTP Transmitters and Receivers Extron XTP transmitters and receivers are used to interface with remote sources and displays via long distance transmission of AV and control signals as well as Ethernet over a shielded CATx cable. XTP transmitters and receivers are fully compatible with XTP CrossPoint matrix switchers as part of a fully integrated switching and distribution system for local and remote sources and displays. They support HDMI, DVI, analog RGB, HD component video, and standard definition video. Select XTP transmitters feature automatic multi-input switching to streamline integration of multiple remote sources into XTP Systems. Note: Extron XTP DTP 24 Shielded Twisted Pair cable provides added protection from outside interference and ensures high quality signal transmission.
XTP T HDMI XTP Transmitter for HDMI Features
• Transmits video, audio, bidirectional RS-232 and IR, and Ethernet up to 330 feet (100 meters) over a shielded CATx cable • Supports computer video up to 1920x1200, including HDTV 1080p/60 Deep Color and 2K • Compatible with XTP DTP 24 and CATx shielded twisted pair cable • Bidirectional RS-232 and IR insertion for AV device control • HDMI loop-through with selectable audio control • HDCP compliant • EDID Minder and Key Minder • Ethernet extension • Remote power capability Model XTP T HDMI
Version Description XTP HDMI Transmitter
Part Number 60-1043-12
XTP T USW 103 Three Input XTP Switcher with Integrated XTP Transmitter Features
• Transmits HDMI or digitized analog video, audio, bidirectional RS-232 and IR, and Ethernet up to 330 feet (100 meters) over a shielded CATx cable • Supports computer video up to 1920x1200, including HDTV 1080p/60 Deep Color and 2K • Compatible with XTP DTP 24 and CATx shielded twisted pair cable • Auto-input switching • Bidirectional RS-232 and IR insertion for AV device control • HDCP compliant • EDID Minder and Key Minder • Ethernet extension • Remote power capability Model XTP T USW 103
Version Description Three Input XTP Transmitter Switcher
Part Number 60-1198-01
header_main XTP Transmitters and Receivers XTP T VGA Universal XTP Transmitter for VGA Features
• Transmits digitized analog video, audio, bidirectional RS-232 and IR, and Ethernet up to 330 feet (100 meters) over a shielded CATx cable • Supports RGB, HD component video, S-video, & composite video • Compatible with XTP DTP 24 and CATx shielded twisted pair cable • SD Pro processing • Bidirectional RS-232 and IR insertion for AV device control • EDID Minder • Ethernet extension • Remote power capability Model XTP T VGA
Version Description Universal XTP VGA Transmitter
Part Number 60-1231-12
XTP T HWP 101 XTP Transmitter for HDMI - Decora® Wallplate Features
• Transmits HDMI with embedded audio up to 330 feet (100 meters) over a shielded CATx cable • Supports computer video up to 1920x1200, including HDTV 1080p/60 Deep Color and 2K • Compatible with XTP DTP 24 and CATx shielded twisted pair cable • HDCP compliant • EDID Minder and Key Minder • Remote power capability Version Description HDMI Decora Transmitter - Black HDMI Decora Transmitter - White
Model XTP T HWP 101 XTP T HWP 101
Part Number 60-1407-12 60-1407-13
XTP T UWP 202 Two Input XTP Transmitter - Decora® Wallplate Features
• Transmits HDMI or digitized analog video, audio, bidirectional RS‑232 and IR, and Ethernet up to 330 feet (100 meters) over a shielded CATx cable • Supports computer video up to 1920x1200, including HDTV 1080p/60 Deep Color and 2K • Compatible with XTP DTP 24 and CATx shielded twisted pair cable • Auto-input switching • Bidirectional RS-232 and IR insertion for AV device control • HDCP compliant • EDID Minder and Key Minder • Ethernet extension - XTP T UWP 202 • Remote power capability • RS-232 control Model XTP T UWP 202 XTP T UWP 202 XTP T UWP 202 NL XTP T UWP 202 NL
Version Description 2 Input Decora Transmitter-Black 2 Input Decora Transmitter-White 2 Input Decora Transmitter No LAN -Black 2 Input Decora Transmitter No LAN -White
Part Number 60-1216-12 60-1216-13 60-1410-12 60-1410-13
XTP T UWP 202 NL
XTP Transmitters and Receivers XTP T EU 202 Two Input XTP Transmitter for EU-type Junction Boxes Features
• Designed to mount in a standard two-gang EU-type electrical junction box • Transmits HDMI or digitized analog video, audio, and bidirectional RS-232 and IR up to 330 feet (100 meters) over a shielded CATx cable • Supports computer video up to 1920x1200, including HDTV 1080p/60 Deep Color and 2K • Compatible with XTP DTP 24 and CATx shielded twisted pair cable • Auto-switching between inputs • Bidirectional RS-232 and IR insertion for AV device control • HDCP compliant • EDID Minder and Key Minder • Remote power capability Model XTP T EU 202
Version Description 2 Input EU Transmitter
Part Number 60-1358-35
XTP T MK 202 Two Input XTP Transmitter for MK-type Junction Boxes Features
• Designed to mount in a standard two-gang MK-type electrical junction box • Transmits HDMI or digitized analog video, audio, and bidirectional RS-232 and IR up to 330 feet (100 meters) over a shielded CATx cable • Supports computer video up to 1920x1200, including HDTV 1080p/60 Deep Color and 2K • Compatible with XTP DTP 24 and CATx shielded twisted pair cable •A uto-switching between inputs • Bidirectional RS-232 and IR insertion for AV device control • HDCP compliant • EDID Minder and Key Minder • Remote power capability Model XTP T MK 202
Version Description 2 Input MK Transmitter
Part Number 60-1358-23
XTP T FB 202 Two Input XTP Transmitter for Floor Boxes Features
• Designed to mount in a variety of floor boxes • Transmits HDMI or digitized analog video, audio, bidirectional RS-232 and IR, and Ethernet up to 330 feet (100 meters) over a shielded CATx cable • Supports computer video up to 1920x1200, including HDTV 1080p/60 Deep Color and 2K • Compatible with XTP DTP 24 and CATx shielded twisted pair cable • Auto-switching between inputs • Bidirectional RS-232 and IR insertion for AV device control • HDCP compliant • EDID Minder and Key Minder • Remote power capability Model XTP T FB 202
Version Description Part Number 2 Input XTP Transmitter for Floor Boxes 60-1383-12
XTP Transmitters and Receiver XTP R HDMI XTP Receiver for HDMI Features
• Receives video, audio, bidirectional RS-232 and IR, and Ethernet up to 330 feet (100 meters) over a shielded CATx cable • Supports computer video up to 1920x1200, including HDTV 1080p/60 Deep Color and 2K • Compatible with XTP DTP 24 and CATx shielded twisted pair cable • Bidirectional RS-232 and IR insertion for AV device control • HDCP compliant • EDID Minder and Key Minder • HDMI audio de-embedding with analog stereo and digital S/PDIF audio outputs • Ethernet extension • Remote power capability • Selectable HDMI audio pass-through • Contact closure device control • UL 2043 plenum rated Model XTP R HDMI
Version Description XTP HDMI Receiver
Part Number 60-1043-13
XTP SR HDMI XTP Scaling Receiver Features
• Receives video, audio, bidirectional RS-232 and IR, and Ethernet up to 330 feet (100 meters) over a shielded CATx cable • Scales HDMI, DVI, RGB, HD component video, and standard definition video received from XTP devices • Selectable output rates from 640x480 to 1920x1200, including HDTV 1080p/60 and 2K • Compatible with XTP DTP 24 and CATx shielded twisted pair cable • Bidirectional RS-232 and IR insertion for AV device control • HDCP compliant • EDID Minder and Key Minder • Ethernet extension • Remote power capability • Selectable HDMI audio pass-through • Contact closure device control • Aspect ratio control • Internal test patterns for calibration and setup • UL 2043 plenum rated Model XTP SR HDMI
Version Description XTP Scaling Receiver
Part Number 60-1199-01
XTP Transmitters and Receivers XTP R HWP 201 XTP Receiver with 90° HDMI Connector for Wall-Mounted Displays Features
• Receives video with embedded audio, bidirectional RS-232 and IR, and Ethernet up to 330 feet (100 meters) over a shielded CATx cable • Unique low-profile wallplate design requires minimal space behind a flat panel display • Supports computer video up to 1920x1200, including HDTV 1080p/60 Deep Color and 2K • Compatible with XTP DTP 24 and CATx shielded twisted pair cable • Bidirectional RS-232 and IR insertion for AV device control • HDCP compliant • EDID Minder and Key Minder • Ethernet extension • HDMI audio de-embedding with analog stereo audio outputs and volume control • Remote power capability • Mounts in an included two-gang Decora®-style wallplate Model XTP R HWP 201 XTP R HWP 201
Version Description XTP Decora Receiver - Black XTP Decora Receiver - White
Part Number 60-1367-22 60-1367-23
MODEL 80
AUDIO L
R
OVER XTP RS-232
IR
Tx Rx G Tx Rx
LAN
HDMI OUT PWR SIG AUDIO
FLAT PANEL
AU
DIO
L
R
OV
E
R -23 XTP 2 IR
RS
Tx
Rx
G
LAN
Extron XTP R HWP 201
XTP Receiver for HDMI Decora Wallplate
Tx
Back of Display
Rx
Wall 1 Inch
HD MI
OU T
R PW SIG DIO AU
XTP Transmitters and Receiver header_main XTP POWER INJECTORS XTP PI 100 Single Port XTP Power Injector Features
• Supplies power to one XTP extender • Designed specifically for the high data rates of XTP Systems • No impact on signal quality • Patented ZipClip™ 200 mounting kit included: – Mounts securely on a variety of surfaces, including rack rails, tables, lecterns, projector poles, and table legs – Wire tie slots for proper strain relief and dressing of excess cable – Quick release tab allows for easy installation and removal • Real-time status LEDs for troubleshooting and monitoring • UL/c-UL listed and CE compliant • 1U, quarter rack width enclosure Model XTP PI 100
Version Description Single Port XTP Power Injector
Part Number 60-1233-01
XTP PI 400
Four Port XTP Power Injector Features
• Supplies power for up to four XTP extenders • Designed specifically for the high data rates of XTP Systems • No impact on signal quality • Real-time status LEDs for troubleshooting and monitoring • UL/c-UL listed and CE compliant • 1U, half rack width enclosure Model XTP PI 400
Version Description Four Port XTP Power Injector
Part Number 60-1298-01
ACCESSORIES WPD 100 Series Pass-Through Wallplates - Decora® for XTP DTP 24 Cable FEATURES
• Designed for use with Extron XTP DTP 24 Cables, Non-Plenum part #22-236-03 and Plenum part #22-235-03 • Fully shielded design reduces noise due to high EMI/RFI interference • Metal strain relief and ground bonding • Gold plated contacts Model WPD 101 C WPD 102 C WPD 101 P WPD 102 P
Version Description One XTP DTP 24 Coupler Two XTP DTP 24 Couplers One XTP DTP 24 Punch Down Jack Two XTP DTP 24 Punch Down Jacks
Part Number 70-1053-03 70-1055-03 70-1054-03 70-1056-03
WPD 101 C
WPD 102 P
XTP Cable & Accessories Extron offers a variety of products to streamline the installation and integration of XTP Systems. The XTP DTP 24 twisted pair cables and termination accessories are designed specifically for use with XTP Systems to provide optimum signal transmission. These Extron-certified cables, RJ-45 plugs, jacks, and couplers provide assured performance over the entire XTP cable infrastructure.
RECOMMENDED
XTP DTP 24
XTP DTP 24 Plug
Shielded Twisted Pair Cable for XTP Systems and DTP Systems Products • Engineered for superior performance with Extron XTP Systems and DTP Systems products • Provides added protection from outside interference and ensures high quality signal transmission • Certified to 475 MHz bandwidth at distances up to 330 feet (100 m) • Independently tested and verified to meet performance requirements set by HDBaseT Alliance • SF/UTP design with four unshielded twisted pairs inside an overall braid and foil shield • 24 AWG solid copper construction • Plenum and Non-Plenum rated versions available
Shielded RJ-45 Plug Kit for Extron XTP DTP 24 Shielded Twisted Pair Cable • Engineered for use with XTP DTP 24 Shielded Twisted Pair Cable • Metal strain relief and ground bonding • Ideal for high EMI/RFI environments • Conductor alignment guide reduces crosstalk and signal interference • Gold plated contacts • Available in quantities of 10
Model XTP DTP 24/1000 XTP DTP 24P/1000
Model XTP DTP 24 Plug
Version Description Non-Plenum 1000’ (305 m) spool Plenum 1000’ (305 m) spool
Part Number 22-236-03 22-235-03
Version Description XTP DTP 24 Plug, Package of 10
Part Number 101-005-02
XTP DTP 24 Punch Down Jack
XTP DTP 24 Coupler
Shielded RJ-45 Coupler for Extron XTP DTP 24 Shielded Twisted Pair Cable • Engineered for use with XTP DTP 24 Shielded Twisted Pair Cable • Keystone style snap-in design for ease of installation in wallplates, AAP - Architectural Adapter Plates, and similar mounting frames • Metal strain relief and ground bonding • Ideal for high EMI/RFI environments • Gold plated contacts • Includes punch down tool for quick and easy termination • Available in quantities of 10
Shielded RJ-45 Coupler for Extron XTP DTP 24 Shielded Twisted Pair Cable • Engineered for use with XTP DTP 24 Shielded Twisted Pair Cable • Fully shielded design reduces noise due to high EMI/RFI interference • Compatible with TIA/EIA 568A/B wiring standards • Keystone-style snap-in design for ease of installation in wallplates, AAP - Architectural Adapter Plates, and similar mounting frames • Gold plated contacts • Available in quantities of 10
Model XTP DTP 24 Jack
Model XTP DTP 24 Coupler
Version Description XTP DTP 24 Jack, Package of 10
Part Number 101-023-01
Version Description XTP DTP 24 Coupler, Package of 10
Part Number 101-022-02
XTP System Configuration Software XTP Systems include convenient, user-friendly control software for configuring, operating, and monitoring the matrix switcher and remote XTP transmitters and receivers. Within a single window, the software provides a complete view of the system, allowing a user to manage input and output ties, monitor real-time signal and HDCP status for local and remote endpoints, and verify EDID communication as well as the audio format for any signal path. The software also makes it easy to control remote XTP devices and manage power to them, and includes tools for configuring EDID communication, creating I/O presets, and backing up or restoring system settings.
Executive_Conference_Center.xtp - XTP Configurator File
Tools
Help
Connections
Device Settings
XTP Power
EDID Minder
System Configuration
XTP T HDMI
System Configuration
General Information
XTP CrossPoint 1600 Inputs
XTP Tx
Input Cards
AV
A
V
Output Cards
XTP 4i DVI Pro
XTP Rx
Outputs
XTP 4o HDMI
Signal
Signal
PC
1
1
Samsung
PC
2
2
Sony
PC
3
3
Vizio
PC
4
4
LG XTP 4o
XTP 4i
Signal Laptop
5
5
XTP R HDMI
Panasonic
PC
XTP T HDMI
6
6
XTP SR HDMI
Dell
Blu-ray 1
XTP T HDMI
7
7
XTP R HDMI
Samsung
Blu-ray 2
XTP T HDMI
8
8
Double click to power
Laptop
Signal
Double click to power
9
9
XTP R HDMI
SHARP
Double click to power
10
10
XTP R HDMI
DELL
XTP T VGA
11
11
XTP SR HDMI
DELL
12
12
XTP R HDMI
DELL
Empty
XTP T HDMI
Firmware Version:
1.00
Temperature:
81 F
Loop-Thru Display:
DELL
Signal Information HDCP:
On
1080p @ 60Hz 2 Ch Audio
Audio Information Audio Input Selected: HDMI
XTP 4o
Signal
Blu-ray 2
Device Type:
Current EDID Information
Signal
XTP T UWP202
XTP 4i DMA
Device Name:
XTP 4o HDMI
Signal 13
13
Samsung
14
14
Sony
15
15
Vizio
16
16
LG
Audio Gain:
N/A
Embedded Audio:
Present
Power Information Power Source:
Matrix
Power Consumption:
12W
XTP System Configuration Software XTP System Configuration Software makes it easy to manage EDID communication between displays and sources. It allows a user to examine the EDID that is automatically captured from displays connected to the XTP CrossPoint matrix switcher or XTP receivers, to determine a display’s native or optimal resolution, refresh rate, and color space, as well as audio format compatibility. The user can then assign this EDID to any local or remote input device connected to the system. Alternatively, several pre-stored EDID settings are available based on various resolutions, refresh rates, and audio formats. All EDID management options are accessible within a single window of the XTP Systems software.
Application Diagrams ETHERNET EXTENSION XTP Systems can extend Ethernet over the same CATx cable used for transmitting AV, control signals, and power. This capability easily provides LAN access for remote endpoints via the XTP CrossPoint matrix switcher, without the need for dedicated network drops, additional Ethernet switches, or additional IP addresses. A house LAN and a separate AV control LAN can be connected into the matrix switcher, enabling Internet access for source devices, and control of remote displays. A shared LAN can also be used to provide both Internet access and AV system control at remote endpoints, and also provides the flexibility to install touchpanels and other control devices anywhere in the system. AV Control Network Switch Projector
Ethernet
AV LAN
XTP R HDMI
Ethernet Ethernet
Ethernet
SIG
POWER 12V --A MAX
LINK
OVER XTP RS-232
XTP IN
XTP T UWP 202
ACT
LAN
LINK
Tx Rx
OUTPUTS
HDMI AUDIO ON
IR
OFF
Tx Rx
HDMI
XTP R HDMI
S/PDIF
AUDIO L
R
+ -
+ -
RELAYS 1
2
RESET
Laptop PWR HDCP HDMI PC
AUDIO INPUT
HDMI INPUT
XTP CP 4o
XTP CP 4o
IR
IR
Tx Rx Tx Rx
RS-232
RS-232 IR
Projector
Ethernet
XTP R HDMI
RS-232
IR IR RS-232
RS-232
IR/RS-232 OVER XTP
IR
OUT
Rx
Tx Rx
RS-232 IR IR
Tx Rx
LAN
FL OFF
Tx Rx
OPEN/CLOSE
RS-232 HDMI
IR PQLS
RS-232
ACT
STANDBY/ON
Tx Rx
RS 232/RS422
Blu-ray Player
Tx Rx
RS-232
REMOTE
OUT
Tx Rx
IN
Tx Rx
L
IN
Tx Rx
IN
XTP CP 4i HDMI
LINK
R
ACT
R
Ethernet
L
XTP CP 4i HDMI
COMPUTER IN LAN
SIG
POWER 12V --A MAX
LINK
OVER XTP RS-232
ACT
XTP IN
LAN
LINK
OUTPUTS
HDMI AUDIO ON
IR
OFF
Tx Rx
Tx Rx
HDMI
AUDIO
S/PDIF
L
R
+ -
+ -
XTP R HDMI RELAYS 1
2
RESET
LINK
PWR
LAN LINK
SIG LINK
−
XTP T HDMI
Projector
SIG
+
RS-232
IR
Tx Rx
Tx Rx
RESET
XTP OUT
ACT
LAN
PWR
R
−
PWR
L
LINK
Ethernet LINK
ACT
+
LINK
OVER XTP
AUDIO
LOOP-THRU OFF
XTP
SIG
HDMI AUDIO ON
HDMI
LAN LINK
INPUTS
POWER 12V --A MAX
O U T P U T S
ACT
XTP T HDMI
I N P U T S
PWR
XTP
RESET
Ethernet
LINK
ACT
LAN LINK
USB
XTP SR HDMI
INPUTS
POWER 12V --A MAX
SIG
OVER XTP
RS-232
IR
LINK
ACT
OVER XTP
RS-232
ACT
OUT
LAN
Tx Rx
LINK
Tx
OUTPUTS
HDMI AUDIO ON
S/PDIF
AUDIO L
OFF
Rx
+ −
HDMI
R
+
−
XTP SR HDMI RELAYS 1 2
REMOTE RS-232
RESET
Tx Rx
PWR
PWR
SIG
XTP
XTP IN
IR
XTP T USW 103
LINK
AUDIO
IN
IN
XTP T USW 103
PWR
DISCONNECT POWER CORD BEFORE SERVICING
LINK
OUT
50-60Hz
SIG
POWER 12V --A MAX
SIG
XTP
LINK
ACT
LINK
PWR
SIG
XTP PWR
--A MAX
LAN LINK
100-240V
CONTACT
RS-232 RESET
2
3
XTP OUT
ACT
LAN
LINK
Tx Rx
Tx Rx
1
2
3
Tx Rx
Extron XTP CrossPoint 3200
Ethernet
COMPUTER
AUDIO
1
Ethernet
Cable Cubby 600 with AAPs
House LAN
Ethernet
100-240VAC 50/60 Hz
Ethernet
1
R-Y
Y/ VID
B-Y/ C
2
0.5A MAX
House Network Switch
H.264 Streaming Media Encoder
INPUTS
RGB/R-Y,Y,B-Y/YC/VID
AUDIO 1
1 BUFFERED LOOP
3
Ethernet
SME 100
DVI
Ethernet
L
R
L
R
1
L
R
LAN RS-232
DVI-D
BUFFERED LOOP
Tx Rx
R
Application Diagrams XTP SYSTEM CONTROL VIA BIDIRECTIONAL RS-232 INSERTION Entire XTP Systems, including the matrix switcher, transmitters and receivers, and remote devices, can be operated from a single point of control. RS-232 signals delivered via Ethernet from a control system can be inserted into the XTP CrossPoint matrix switcher, which are then transmitted to remote endpoints. Using the same CATx cable for AV, control, Ethernet, and power streamlines and simplifies system installation. INPUTS
POWER 12V 0.7A MAX
Camera
L
OFF
LOOP THRU
+
RS-232
R
−
+
SIG
OVER XTP
AUDIO
AUDIO ON
XTP T HDMI
HDMI
−
Extron XTP T HDMI
LINK
IR
RESET
Tx Rx G Tx Rx
XTP OUT
XTP Transmitter for HDMI
LAN
Single CATx cable transport of: • Digital Video • Digital Audio • Bidirectional IR Control • Bidirectional RS-232 Control • Ethernet • Remote Power
RS-232 100-240V ~ 50-60Hz 1
+
1
2
-
+
-
2
3
1
7
T x R x G T x R x G T x R x G T x R x G RTS CTS
2
S G
3
S G
S G
4
1
2
3
4
5
6
7
8
PWR OUT = 12W
+V +S -S G
S G
eBUS
SWITCHED 12 VDC 40W MAX TOTAL
3
5A MAX
+
IPCP PRO 550
4
4
- + 12 VDC
5
6
8
T x R x G T x R x G T x R x G T x R x G RTS CTS
COM
5
6
7
8
S G
S G
S G
S G
IR/SERIAL
1
2
3
4
LAN G
CATx Cable
FLEX I/O
RELAYS
Extron IPCP Pro 550
IP Link Pro Control Processor
Ethernet
XTP CROSSPOINT 1600 SIG
INPUTS
LINK
SIG
PWR
1−4
Ethernet
SIG
SIG
SIG
SIG
XTP IN
LAN
LINK
SIG
PWR
XTP IN
LAN
LINK
LINK
LAN
XTP IN
LAN
RS-232 IR
RS-232 IR
RS-232 IR
RS-232 IR
Tx Rx G Tx Rx
Tx Rx G Tx Rx
Tx Rx G Tx Rx
Tx Rx G Tx Rx
XTP CP 4i
OVER XTP
PWR
XTP IN
LAN
XTP CP 4i
OVER XTP
PWR
XTP IN
LAN
LINK
PWR
XTP IN
LINK
PWR
XTP IN
LAN
LINK
PWR
5−8 INPUTS
AV Control Network
LINK
PWR
XTP IN
SIG
INPUTS
LAN
RS-232 IR
RS-232 IR
Tx Rx G Tx Rx
Tx Rx G Tx Rx
INPUTS
RS-232 IR
RS-232 IR
Tx Rx G Tx Rx
Tx Rx G Tx Rx
XTP CP 4i VGA
AUDIO
9−12
L
R
L
R
L
R
L
R
L
R
L
R
L
R
L
R
L
R
L
L
R
L
13−16
RESET
Ethernet RS-232/422
REMOTE
LAN
OUTPUTS OUTPUTS
DVI-D
DVI-D
DVI-D
DVI-D
OUTPUTS
DVI-D
DVI-D
DVI-D
DVI-D
PC
DVD
Doc Cam
VCR
Tuner
1
2
Channel
3
Presets
Off
5 8 0
Screen Lighting
Help
AUDIO
5−8
6
Mute
9
OUTPUTS
4 7
Mute
Room Control
Last More Presets
Enter
December 15, 2013 - 7:58 AM
Audio Control
System Off
R
123
Volume
Tuner
On
XTP HDMI XTP CPCP 4o4o DVI Pro
AUDIO AUDIO
1−4 Laptop
Display
DISCONNECT POWER CORD BEFORE SERVICING
SIG
OUTPUTS
LINK
SIG
PWR
9−12
100-240V 12.0A MAX
XTP OUT
Extron TLP Pro 1020T
LINK
SIG
PWR
LINK
SIG
PWR
XTP OUT
LAN
LINK
XTP OUT
XTP OUT
LAN
R
XTP CP 4o
OVER XTP
PWR
LAN
XTP CP 4o DVI Pro
LAN
RS-232 IR
RS-232 IR
Tx Rx G Tx Rx
Tx Rx G Tx Rx
OUTPUTS
RS-232 IR
RS-232 IR
Tx Rx G Tx Rx
Tx Rx G Tx Rx
L
R
L
R
Extron XTP CrossPoint 1600
XTP CP 4o SA
AUDIO L
R
L
R
13−16
10" Tabletop TouchLink Pro Touchpanel
Modular Digital Matrix Switchers
50-60Hz
Single CATx cable transport of: • Digital Video • Digital Audio • Bidirectional IR Control • Bidirectional RS-232 Control • Ethernet • Remote Power
CATx Cable RS-232 SIG
POWER 12V 1A MAX
LINK
OVER XTP RS-232
AUDIO
IR
OUTPUTS
AUDIO L
ON
R
RELAYS 1
2
REMOTE RS-232
RESET
OFF
XTP IN
Tx Rx G Tx Rx
LAN
+ −
HDMI
+
−
S/PDIF
Projector
Extron XTP SR HDMI
XTP Scaling Receiver
Tx Rx G
BIDIRECTIONAL RS-232 AND IR INSERTION XTP Systems provide easy interfacing of control signals for devices at remote endpoints through bidirectional RS-232 and IR insertion ports on the matrix switcher I/O boards and transmitters and receivers. A control processor or other device can then directly insert RS-232 or IR commands into the matrix switcher. These commands are then sent out to the endpoints over the shared CATx cable, so that no additional cabling is required for system control. INPUTS
POWER 12V 0.7A MAX
HDMI
LOOP THRU
OFF
L
+
RS-232
R
−
+
SIG
OVER XTP
AUDIO
AUDIO ON
XTP T HDMI
−
Single CATx cable transport of: • Digital Video • Digital Audio • Bidirectional IR Control • Bidirectional RS-232 Control • Ethernet • Remote Power
Extron XTP T HDMI
LINK
IR
RESET
Tx Rx G Tx Rx
XTP OUT
Laptop
DVD
1
2
4
5
7
Screen Lighting
IR Control
Doc Cam
VCR
Tuner
Channel
3
123
Volume
Tuner
On
Presets
Off
6
Help
8
9
0
Enter
Ethernet
Mute
Mute
Room Control
TCP/IP Network
Last More Presets
December 15, 2013 - 7:58 AM
System Off
Audio Control
STANDBY/ON
PQLS
HDMI
OPEN/CLOSE
FL OFF
Extron TLP Pro 1020T
USB
10" Tabletop TouchLink Pro Touchpanel Ethernet
CATx Cable IR Control
XTP CROSSPOINT 1600 SIG
INPUTS
LINK
LINK
SIG
SIG
LINK
SIG
LINK
LINK
XTP IN
LAN
XTP CP 4i
OVER XTP RS-232 IR
SIG
LAN
RS-232 IR
RS-232 IR
Tx Rx G Tx Rx
Tx Rx G Tx Rx
RS-232 IR
RS-232 IR
Tx Rx G Tx Rx
Tx Rx G Tx Rx
Tx Rx G Tx Rx
RS-232 IR
Tx Rx G Tx Rx
XTP CP 4i
OVER XTP
PWR
XTP IN
LAN
LINK
XTP IN
LAN
PWR
XTP IN
LAN
SIG
PWR
XTP IN
LAN
PWR
XTP IN
LINK
PWR
XTP IN
LAN
PWR
5−8
LINK
PWR
XTP IN
SIG
INPUTS
INPUTS
SIG
PWR
1−4
LAN
INPUTS
RS-232 IR
RS-232 IR
Tx Rx G Tx Rx
Tx Rx G Tx Rx
9−12
R
L
R
Modular Digital Matrix Switchers
XTP CP 4i VGA
AUDIO L
Extron XTP CrossPoint 1600
L
R
L
R
13−16
100-240V ~ 50-60Hz 1
+
RESET
3
RS-232/422
REMOTE
OUTPUTS OUTPUTS
DVI-D
DVI-D
DVI-D
DVI-D
DVI-D
OUTPUTS
SIG
OUTPUTS
LINK
SIG
PWR
9−12
LINK
SIG
PWR
XTP OUT
LAN
LAN
LINK
L
R
L
R
L
R
SIG
LAN
LINK
XTP OUT
L
R
L
L
R
L
AUDIO
-
4
2
3
7
Tx R x G Tx R x G Tx R x G Tx R x G RTS CTS
1
2
3
4
S G
S G
S G
S G
5
6
7
8
S G
S G
S G
S G
1
2
3
4
5
6
7
8
5
6
8
IPCP PRO 550
+ V + S -S G
LAN
RS-232 IR
RS-232 IR
Tx Rx G Tx Rx
Tx Rx G Tx Rx
Tx Rx G Tx Rx
R
L
IR/SERIAL
RELAYS
1
2
3
4
LAN G
R
L
IP Link Pro Control Processor RS-232
R
13−16
CATx Cable RS-232 POWER 12V 1A MAX
SIG
LINK
OVER XTP RS-232
IR
AUDIO
OUTPUTS
AUDIO L
ON
R
RELAYS 1
2
REMOTE RS-232
OFF
XTP IN
LAN
Tx Rx G Tx Rx
HDMI
+ −
+
−
S/PDIF
FLEX I/O
Extron IPCP Pro 550
XTP CP 4o SA
AUDIO L
COM
XTP CP 4o
RS-232 IR
R
Tx R x G Tx R x G Tx R x G Tx R x G RTS CTS
R
Tx Rx G Tx Rx L
- + 12 VDC
XTP CP 4o DVI Pro
RS-232 IR
OUTPUTS
+
50-60Hz
Single CATx cable transport of: • Digital Video • Digital Audio • Bidirectional IR Control • Bidirectional RS-232 Control • Ethernet • Remote Power
P W R O UT = 1 2 W
eBUS 4
R
OVER XTP
PWR
XTP OUT
R
DVI-D
PWR
XTP OUT
L
5A MAX
XTP HDMI XTP CPCP 4o4o DVI Pro
AUDIO AUDIO
DVI-D
5−8
100-240V 12.0A MAX
+
LAN
DVI-D
OUTPUTS
1
2
-
SWITCHED 12 VDC 40W MAX TOTAL
1−4
DISCONNECT POWER CORD BEFORE SERVICING
PC
Display
Blu-ray
XTP Transmitter for HDMI
LAN
Tx Rx G
RESET
Extron XTP SR HDMI
XTP Scaling Receiver
Projector
Application Diagrams REMOTE DEVICE POWERING Remote XTP transmitters and receivers can be powered by the XTP CrossPoint matrix switcher over the shared CATx cable. This simplifies installation of remote XTP devices, especially the wall-mount model, since external AC power is not necessary. The matrix switcher is capable of delivering power through its I/O ports to 24 or 28 endpoints, depending on model, and automatically monitors and manages power consumed by XTP devices. The control software provides a convenient GUI to view and configure remote power distribution. Additional powering for endpoints can be provided by an optional XTP PI 100 or XTP PI 400 power injector, which injects supplemental voltage into a shielded CATx cable. Extron XTP CrossPoint 1600
CATx Cable
Extron XTP T HDMI
Modular Digital Matrix Switchers
XTP Transmitter for HDMI INPUTS
POWER 12V --A MAX
SIG
HDMI AUDIO ON
LOOP-THRU OFF
+
−
R
+
RS-232
XTP T HDMI
−
IR
RESET
XTP OUT
Tx Rx
Tx Rx
ACT
LAN
IN
SIG
1−4
LINK
LINK
PWR
SIG
LAN
ACT
SIG
PWR
ACT
LAN
LAN
ACT
SIG
ACT
LAN
XTP
ACT
LAN
XTP
LINK
LINK
SIG
PWR
LINK
LINK
ACT
LAN
LINK
XTP
ACT
LAN
XTP
LINK
ACT
LAN
LINK
IN
REMOTE RS-232/RS-422
OUTPUTS S/PDIF
AUDIO L
OFF
HDMI
+ −
R
+
−
XTP SR HDMI RELAYS 1 2
Tx Rx
RS-232
IR
Tx Rx
Tx Rx
Tx Rx
Tx Rx
XTP CP 4i
XTP CP 4i VGA
L
R
L
R
L
R
L
R
L
R
L
R
L
R
L
R
L
R
L
R
RS-232
IR
RS-232
IR
Tx Rx
Tx Rx
Tx Rx
Tx Rx
R
L
R
REMOTE RS-232
XTP CP 4o DVI Pro
AUDIO
XTP CP 4o DVI Pro
AUDIO
L
R
L
R
5−8
OUT
SIG
LINK
SIG
PWR
LINK
SIG
PWR
ACT
LAN
SIG
PWR
XTP
LINK
LINK
ACT
LAN
ACT
LAN
XTP
LINK
XTP CP 4o
IR/RS-232 OVER XTP
PWR
XTP
LINK
LINK
ACT
LAN
LINK
RS-232
IR
RS-232
IR
Tx Rx
Tx Rx
Tx Rx
Tx Rx
L
R
L
R
XTP CP 4o SA
AUDIO
L
13−16
OUT
OUTPUTS
HDMI AUDIO ON
Tx Rx
IR
Tx Rx
IR
OUT
Rx
Tx Rx
IR
Tx Rx
OUT
IR
Tx Rx
RS-232
Tx Rx
RS-232
RESET
XTP
Tx
Tx Rx
RS-232
OUT
Tx Rx
LINK
IR
LINK
OUT 1−4
OUT
OVER XTP
LAN
Tx Rx
LAN
ACT
9−12
RS-232
ACT
RS-232
IN
LINK
IR
Tx Rx
IR
AUDIO
9−12
XTP Scaling Receiver
XTP IN
RS-232
Tx Rx
13−16
Extron XTP SR HDMI SIG
IR
Tx Rx
RS-232
IR/RS-232 OVER XTP
OUT
POWER 12V --A MAX
RS-232
LINK
PWR
LINK
XTP CP 4i
IR/RS-232 OVER XTP
PWR
XTP
LINK
LINK
PWR
XTP
SIG
PWR
XTP
LINK
LINK
LINK
IN
INPUTS
IN
SIG
5−8
LINK
PWR
XTP
Single CATx cable transport of: • Digital Video • Digital Audio • Bidirectional IR Control • Bidirectional RS-232 Control • Ethernet • Remote Power
SIG
IN
HDMI
LINK
OVER XTP
AUDIO L
RESET
100-240V -- A MAX 50-60Hz
Tx Rx
CATx Cable
REMOTE POWER OF TRANSMITTERS INPUTS
POWER POWER 12V 12V --A MAX MAX --A
SIG SIG
1
2
XTP T USW 103
LINK LINK
OVER XTP XTP OVER
AUDIO
RS-232 RS-232
3
XTP OUT OUT XTP
ACT ACT
LAN NET
LINK LINK
Tx Rx Rx Tx
IR IR
Tx Rx Rx Tx
CONTACT CONTACT
11
22
RS-232 RS-232
33
RESET RESET
Extron XTP T USW 103
XTP Switcher with Integrated Transmitter
Tx Rx Rx Tx
Remote Power
Single CATx cable transport of: • Digital Video • Digital Audio • Bidirectional IR Control • Bidirectional RS-232 Control • Ethernet • Remote Power
Extron XTP PI 100
100-240V 50/60 Hz ---A MAX
XTP
XTP PWR
XTP Power Injector
PWR
Extron XTP SR HDMI XTP Scaling Receiver
CATx Cable SIG
POWER 12V --A MAX
LINK
OVER XTP
RS-232
12V Local Power Supply
XTP IN
ACT
LAN
LINK
Tx Rx
HDMI AUDIO ON
IR
Tx
OUTPUTS
OFF
Rx
S/PDIF
AUDIO L
HDMI
R
+ −
+
XTP SR HDMI RELAYS 1 2
REMOTE RS-232
−
RESET
Tx Rx
REMOTE POWER OF RECEIVERS INPUTS
POWER 12V --A MAX
SIG
XTP T USW 103
LINK
OVER XTP
AUDIO
RS-232
IR
CONTACT
RS-232 RESET
1
2
3
XTP OUT
ACT
LAN
LINK
Tx Rx
Tx Rx
1
2
3
CATx Cable
Extron XTP PI 100 XTP Power Injector
Single CATx cable transport of: • Digital Video • Digital Audio • Bidirectional IR Control • Bidirectional RS-232 Control • Ethernet • Remote Power
100-240V 50/60 Hz ---A MAX
XTP
Extron XTP T USW 103
XTP Switcher with Integrated Transmitter
Tx Rx
XTP PWR PWR
Extron XTP SR HDMI XTP Scaling Receiver
CATx Cable
12V Local Power Supply
POWER 12V --A MAX
SIG
LINK
XTP IN
Remote Power
OVER XTP
RS-232
ACT
LAN
LINK
Tx Rx
IR
Tx
Rx
OUTPUTS
HDMI AUDIO ON
OFF
S/PDIF
AUDIO L
HDMI
+ −
R
+
−
XTP SR HDMI RELAYS 1 2
REMOTE RS-232
Tx Rx
RESET
XTP System Builder FULL CONFIGURATION CAPABILITY WITH ALL SYSTEM COMPONENTS XTP System Builder steps you through designing your AV signal switching and distribution solution. With a few clicks of the mouse, your XTP System evolves from an empty frame to a complete design that includes extenders, accessories, and cabling. XTP System Builder generates an as-configured custom part number for the XTP CrossPoint and compiles all selected components into a single equipment list. With convenient 24/7 access, the intuitive XTP System Builder is always available for system design, quote submittal, and pricing.
Configuration of the XTP System begins with selection of the appropriate XTP CrossPoint modular frame. The image of the frame in XTP System Builder automatically populates with each board selection or configuration change.
Power Tracker Know at a glance how many devices can be and are being powered by the XTP CrossPoint in its current configuration. Power Tracker also lets you know when it’s time to reassign an endpoint device to receive local power, or if adding an input or output board can provide the desired remote power capabilities.
Printable Bill of Materials The complete BOM, including an image of the configured XTP CrossPoint matrix switcher, can be saved as a PDF file or Excel worksheet with optional pricing and project information. It is ideal for your project files and is also suitable for sharing with your client.
To complete your design, the online tool lists XTP transmitters and receivers as well as other XTP accessories. Selection of local or remote power for each XTP device helps to streamline system integration and ensure power needs are met prior to going on site.
Specifications VIDEO INPUT — XTP CP 4I, XTP CP 4I DMA
Number/signal type 4 sets of proprietary twisted pair AV signals Connectors 4 female RJ-45 per board NOTE: Input comes from an Extron XTP Series twisted pair transmitter. VIDEO OUTPUT — XTP CP 4O
Number/signal type 4 sets of proprietary twisted pair AV signals Connectors 4 female RJ-45 per board NOTE: Output connects to an Extron XTP Series twisted pair receiver. VIDEO — XTP CP 4I VGA
Gain Unity Bandwidth 300 MHz (-3 dB), fully loaded 0-10 MHz: no more than +0.1 dB to -0.1 dB 0-130 MHz: no more than +0.8 dB to -0.8 dB Switching speed 200 ms (max.) VIDEO INPUT — XTP CP 4I VGA
Number/signal type 4 analog VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video, composite video Connectors 4 female 15-pin HD Minimum/maximum levels Analog: 0.5 V to 2.0 Vp-p with no offset VIDEO PROCESSING — XTP CP 4I VGA
Decoder 8 bit digital Digital sampling 30 bit, 10 bits per color; 162 MHz standard Colors 1 billion SYNC — XTP CP 4I VGA
Input type RGBHV, RGBS, RGsB, RsGsBs Input level 0.5 V to 5.0 Vp-p, 4.0 Vp-p normal Input impedance 510 ohms Horizontal frequency 15 kHz to 150 kHz Vertical frequency 30 Hz to 150 Hz VIDEO — XTP CP 4I DVI PRO, XTP CP 4O DVI PRO
NOTE: *Appropriate DVI-D to HDMI cables or adapters are required for HDMI signal input/output. Gain Unity Resolution range Up to 1920x1200*, 2k, or 1080p @ 60 Hz *Reduced blanking Signal type Single link DVI digital video signals are supported. Digital video RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered (supports all single link DVI and HDMI (if using an optional adapter) standards from 640x480 @ 60 Hz to 1920x1200 @ 60 Hz computer video) or 2k NOTE: These XTP CP DVI Pro boards are compatible with HDMI. Digital audio Supports HDMI audio (if using an HDMI to DVI adapter) transmitted through the RGB and Y, Cr, Cb lines, actively buffered. EDID and DDC Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered. HDCP Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI standards HPD Supports hot plug detection (HPD) of display as a passthrough signal. Maximum data rate 6.75 Gbps (2.25 Gbps per color) Maximum pixel clock 165 MHz Switching speed 200 ns, max. VIDEO INPUT — XTP CP 4I DVI PRO
Number/signal type 4 digital RGB single link DVI-D (or HDMI*) Connectors 4 female DVI-I (digital only) Equalization Automatic Input cable length >100’ (30 m) at 1920x1200, 2k, or 1080p @ 60 Hz
NOTE: The transmission distance varies depending on the signal resolution and on the type of cable, graphics card, and display used in the system. VIDEO OUTPUT — XTP CP 4O DVI PRO
Number/signal type 4 digital RGB single link DVI-D (or HDMI*) Connectors 4 DVI-I (digital only) Re-clocking Automatic Peripheral device power 5 VDC, 250 mA per output VIDEO — XTP CP 4I HDMI, XTP CP 4I HDMI DMA, XTP CP 4O HDMI
NOTE: *Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input/output. Gain Unity Resolution range Up to 1920x1200*, 2k, or 1080p @ 60 Hz *Reduced blanking Signal type Single-link HDMI (or DVI-D*) Digital video RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered (supports all single-link DVI (if using an optional adapter) and HDMI standards from 640x480 @ 60 Hz to 1920x1200 @ 60 Hz) or 2k EDID and DDC Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered. HDCP Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI standards HPD Supports hot plug detection (HPD) of display as a passthrough signal. Maximum data rate 6.75 Gbps (2.25 Gbps per color) Maximum pixel clock 165 MHz Standards DVI 1.0, HDMI, HDCP 1.1 Switching speed 200 ns, max. VIDEO INPUT — XTP CP 4I HDMI, XTP CP 4I HDMI DMA
Number/signal type 4 digital RGB single-link HDMI (or DVI-D*) Connectors 4 female HDMI type A Equalization Automatic Input cable length >100’ (30 m) at 1920x1200, 2k, or 1080p @ 60 Hz NOTE: The transmission distance varies depending on the signal resolution and on the type of cable, graphics card, and display used in the system. VIDEO OUTPUT — XTP CP 4O HDMI
Number/signal type 4 digital RGB single-link HDMI (or DVI-D*) Connectors 4 female HDMI type A Re-clocking Automatic Peripheral device power 5 VDC, 250 mA per output AUDIO INPUT — XTP CP 4I DMA, XTP CP 4I HDMI DMA
Supported formats XTP/HDMI connector LPCM, Multi-channel PCM, Dolby Digital 2/0, Dolby Digital 2/0 Surround, Dolby Digital 5.1, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, DTS 2 Channel, DTS Digital Surround 5.1, DTS-ES Matrix 6.1, DTS-ES Discrete 6.1, DTS-HD, DTS-HD Master Audio Analog connector Analog stereo audio AUDIO — XTP CP 4I VGA, XTP CP 4O SA
Gain Unbalanced output: -6 dB; balanced output 0 dB Frequency response 20 Hz to 20 kHz, ±0.05 dB THD + Noise 0.03% @ 1 kHz at nominal level S/N >90 dB at maximum output (21 dBu, unweighted) (balanced) Crosstalk <-80 dB @ 1 kHz, fully loaded Stereo channel separation >80 dB @ 1 kHz CMRR >75 dB @ 20 Hz to 20 kHz
Specifications AUDIO INPUT — XTP CP 4I VGA
Number/signal type 4 stereo, balanced/unbalanced Connectors (4) 3.5 mm captive screw connector, 5 pole Supported formats Analog stereo audio Impedance >10k ohms unbalanced/balanced, DC coupled Nominal level 0 dBu (0.775 Vrms) Maximum level +19.5 dBu, (balanced or unbalanced) at 1% THD+N Input gain adjustment -18 dB to +18 dB, adjustable per input; default = 0 dB AUDIO OUTPUT — XTP CP 4O SA
Number/signal type 4 stereo, balanced/unbalanced Connectors (4) 3.5 mm captive screw connector, 5 pole Supported formats Analog stereo audio Impedance 50 ohms unbalanced, 100 ohms balanced Gain error ±0.1 dB channel to channel Volume control range -98 dB to 0 dB (volume numbers 0 through 64) in a 35 dB increment from step 0 to step 1, then in 1 dB increments from steps 1 to 64; default = 64 (0 dB) NOTE: Attenuation = volume number minus 64. The default is 0 dB = volume number 64. AUDIO — XTP CP 4I DVI PRO, XTP CP 4O DVI PRO, XTP CP 4I HDMI, XTP CP 4O HDMI
Gain Unbalanced output: -6 dB; balanced output 0 dB Frequency response 20 Hz to 20 kHz, ±0.05 dB THD + Noise 0.01% @ 1 kHz at nominal level S/N >105 dB at maximum output (21 dBu, unweighted) (balanced) Crosstalk <-89 dB @ 1 kHz, fully loaded Stereo channel separation >105 dB @ 1 kHz CMRR >83 dB @ 20 Hz to 20 kHz AUDIO INPUT — XTP CP 4I DVI PRO, XTP CP 4I HDMI
Number/signal type 4 stereo, balanced/unbalanced Connectors (4) 3.5 mm captive screw connector, 5 pole Supported formats HDMI/DVI Pro connector LPCM, Multi-channel PCM, Dolby Digital 2/0, Dolby Digital 2/0 Surround, Dolby Digital 5.1, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, DTS 2 Channel, DTS Digital Surround 5.1, DTS-ES Matrix 6.1, DTS-ES Discrete 6.1, DTS-HD, DTS-HD Master Audio Analog connector Analog stereo audio Impedance >10k ohms unbalanced/balanced, DC coupled Nominal level +4 dBu (1.228 Vrms) Input gain adjustment -18 dB to +18 dB, adjustable per input; default = 0 dB AUDIO OUTPUT — XTP CP 4O DVI PRO, XTP CP 4O HDMI
Analog connector Analog stereo audio Impedance 50 ohms unbalanced, 100 ohms balanced Gain error ±0.1 dB channel to channel Maximum level (Hi-Z) >+21 dBu, balanced or unbalanced at 1% THD+N Maximum level (600 ohm) >+20 dBm, balanced or unbalanced at 1% THD+N Volume control range -75.8 dB to 0 dB (volume numbers 0 through 64) in a 35 dB increment from step 0 to step 1, then in 1 dB increments from steps 1 to 64; default = 64 (0 dB) NOTE: Attenuation = volume number minus 64. The default is 0 dB = volume number 64. CONTROL/REMOTE — SWITCHER HOST PORTS
Serial host control port 1 bidirectional RS-232 or RS-422, rear panel female 9-pin D connector Baud rate and protocol 9600 (default) to 115200 baud, 8 data bits, 1 stop bit, no parity, no flow control USB control port 1 front panel female mini USB B USB standards USB 2.0, low speed Ethernet control port 1 female RJ-45 Ethernet data rate (for network communication) 10/100Base-T, half/full duplex with autodetect Ethernet protocol ARP, ICMP (ping), IP, TCP, DHCP, HTTP, SMTP, Telnet CONTROL/REMOTE
External device (pass-through, unidirectional or bidirectional) Ethernet pass-through port 1 female RJ-45 connector Ethernet data rate 10/100Base-T, half/full duplex with autodetect GENERAL
Power Internal Input: 100-240 VAC, 50-60 Hz XTP CrossPoint 1600 Redundant power supply is optional. XTP CrossPoint 3200 Redundant power supply is standard. Remote power capability XTP CrossPoint 1600 Supports up to 28 endpoints XTP CrossPoint 3200 Supports up to 24 endpoints. Cooling Fan, left to right (as viewed from front panel) Mounting Rack mount Yes Enclosure type Metal Enclosure dimensions (Depth excludes connectors. Width excludes rack ears.) XTP CrossPoint 1600 8.75” H x 17.0” W x 17.5” D (5U high, full rack wide) (22.2 cm H x 43.2 cm W x 44.5 cm D) XTP CrossPoint 3200 17.5” H x 17.0” W x 17.5” D (10U high, full rack wide) (44.5 cm H x 43.2 cm W x 44.5 cm D)
Number/signal type 4 stereo, balanced/unbalanced Connectors (4) 3.5 mm captive screw connector, 5 pole Supported formats HDMI/DVI Pro connector LPCM, Multi-channel PCM, Dolby Digital 2/0, Dolby Digital 2/0 Surround, Dolby Digital 5.1, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, DTS 2 Channel, DTS Digital Surround 5.1, DTS-ES Matrix 6.1, DTS-ES Discrete 6.1, DTS-HD, DTS-HD Master Audio
For complete specifications, please go to www.extron.com Specifications are subject to change without notice.
Worldwide Sales Offices A n a h e i m • R a l e i g h • S i l i c o n Va l l ey • Da l l a s • N ew Yo r k • Wa s h i n g to n, DC • To ro nto • M ex i c o C i t y • Pa r i s • Lo n d o n • F r a n k f u r t A m e r s foo r t • M o s c ow • D u b a i • J o h a n n e s b u r g • N e w D e l h i • B a n g a l o r e • S i n g a p o r e • S e o u l • S h a n g h a i • B e i j i n g • To k yo
UNITED STATES
EUROPE
ASIA
MIDDLE EAST
+800.633.9876
+800.3987.6673
+800.7339.8766
+971.4.299.1800
Inside USA/Canada
Inside Europe
Inside Asia
+1.714.491.1500
+31.33.453.4040
+65.6383.4400
© 2014 Extron Electronics. All rights reserved. All trademarks mentioned are the property of their respective owners. Prices and specifications subject to change without notice.
11-2014 68-2144-01 REV. E2 Letter - English - NP
