Transcript
http://www.fujisemi.com
YA868C08R
FUJI Diode
Schottky Barrier Diode Maximum Rating and Characteristics Maximum ratings (at Ta=25˚C unless otherwise specified.) Item
Symbols
Repetitive peak reverse voltage Average output current Non-repetitive forward surge current** Operating junction temperature Storage temperature
Conditions
Ratings
Units
VRRM
-
80
V
Io
50Hz Square wave duty =1/2 Tc = 105˚C
30*
A
Sine wave, 10ms 1shot
IFSM
160
A
Tj
-
150
˚C
Tstg
-
-40 to +150
˚C
Conditions
Maximum
Units
0.76
V
Note* Out put current of center tap full wave connection. Note** Rating per element
Electrical characteristics Item Forward voltage***
(at Ta=25˚C unless otherwise specified.) Symbols VF
IF =15 A
Reverse current***
IR
VR =VRRM
200
µA
Thermal resistance
Rth(j-c)
Junction to case
1.25
˚C/W
Note*** Rating per element
Mechanical characteristics Item Mounting torque Approximate mass
1
Conditions
Maximum
Units
Recommended torque
0.3 to 0.5
N•m
-
2.0
g
YA868C08R
FUJI Diode
http://www.fujisemi.com
Outline Drawings [mm]
Sn-Cu dipping (Pb＜1000ppm)
2
YA868C08R
FUJI Diode
http://www.fujisemi.com
Forward Characteristic
(typ.)
Reverse Characteristic
(typ.)
105
Tj=150℃ 104
10
Tj=125℃
（μＡ）
Tj=150℃
Reverse Current
Tj=125℃
1
Tj=100℃ Tj=25℃
ＩＦ
Forward Current
（Ａ）
Tj=100℃ 103
102
Tj= 25℃
ＩR
10
1
0.1
100
10-1
0.01 0.0
0
0.1
0.2
0.3
0.4
0.5
ＶＦ Forward Voltage
0.6
0.7
0.8
10
20
0.9
40
50
60
Reverse Voltage
70
80
90
（Ｖ）
（Ｖ）
Reverse Power Dissipation (max.)
Forward Power Dissipation (max.) 22
12
360°
360°
20
DC
11
VR
I0
18
10
α
（Ｗ）
λ
（Ｗ）
30
ＶR
16
9
Reverse Power Dissipation
Forward Power Dissipation
8
14
Square wave λ=60° Square wave λ=120°
12
Sine wave λ=180° Square wave λ=180°
10
DC
8
7
6
α=180°
5
4
ＰＲ
ＷＦ
6
4
3
2
2
1
Per 1element 0
0
0
2
4
Ｉｏ
6
8
10
12
Average Output Current
14
16
18
0
（Ａ）
10
20
ＶＲ
3
30
40
50
Reverse Voltage
60
70
（Ｖ）
80
90
YA868C08R
FUJI Diode
http://www.fujisemi.com
Current Derating
Junction Capacitance Characteristic (max.)
(Io-Tc) (max.) 1000
160
150
140
Sine wave λ=180°
110
Square wave λ=180° 100 Square wave λ=120°
Junction Capacitance (pF)
DC 120
100
Cj
Case Temperature
（℃）
130
Ｔｃ
90
360°
Square wave λ=60°
80
I0 70
VR=40V
λ
60 0
5
10
Ｉｏ
15
20
25
30
35
Average Output Current
40
10
45
1
（Ａ）
λ:Conduction angle of forward current for each rectifier element Io:Output current of center-tap full wave connection
Surge Capability (max.)
100
ＩFSM
Peak Half - Wave Current
（Ａ）
1000
10 1
10
100
Number of Cycles at 50Hz
4
10
100
VR
Reverse Voltage (V)
1000
YA868C08R
FUJI Diode
http://www.fujisemi.com
Surge Current Ratings (max.)
100
10 1
10
100
1000
tTime (ms) Sinewave
Transient Thermal Impedance (max.) 1
10
(°C/W)
Rth(j-c):1.25°C/W
Transient Thermal Impedance
IFSM PeakHAlf-WaveCurrent (A)
1000
0
10
-1
10
-2
10
-3
10
-2
10
-1
0
10
10
t
5
Time
(sec)
1
10
2
10
YA868C08R
FUJI Diode
http://www.fujisemi.com
WARNING 1. This Catalog contains the product specifications, characteristics, data, materials, and structures as of March 2010. The contents are subject to change without notice for specification changes or other reasons. When using a product listed in this Catalog, be sure to obtain the latest specifications. 2. A ll applications described in this Catalog exemplify the use of Fuji's products for your reference only. No right or license, either express or implied, under any patent, copyright, trade secret or other intellectual property right owned by Fuji Electric Systems Co., Ltd. is (or shall be deemed) granted. Fuji Electric Systems Co., Ltd. makes no representation or warranty, whether express or implied, relating to the infringement or alleged infringement of other's intellectual property rights which may arise from the use of the applications described herein. 3. A lthough Fuji Electric Systems Co., Ltd. is enhancing product quality and reliability, a small percentage of semiconductor products may become faulty. When using Fuji Electric semiconductor products in your equipment, you are requested to take adequate safety measures to prevent the equipment from causing a physical injury, fire, or other problem if any of the products become faulty. It is recommended to make your design fail-safe, flame retardant, and free of malfunction. 4. T he products introduced in this Catalog are intended for use in the following electronic and electrical equipment which has normal reliability requirements. • Computers • OA equipment • Communications equipment (terminal devices) • Measurement equipment • Machine tools • Audiovisual equipment • Electrical home appliances • Personal equipment • Industrial robots etc. 5. If you need to use a product in this Catalog for equipment requiring higher reliability than normal, such as for the equipment listed below, it is imperative to contact Fuji Electric Systems Co., Ltd. to obtain prior approval. When using these products for such equipment, take adequate measures such as a backup system to prevent the equipment from malfunctioning even if a Fuji's product incorporated in the equipment becomes faulty. • Transportation equipment (mounted on cars and ships) • Trunk communications equipment • Traffic-signal control equipment • Gas leakage detectors with an auto-shut-off feature • Emergency equipment for responding to disasters and anti-burglary devices • Safety devices • Medical equipment 6. Do not use products in this Catalog for the equipment requiring strict reliability such as the following and equivalents to strategic equipment (without limitation). • Space equipment • Aeronautic equipment • Nuclear control equipment • Submarine repeater equipment 7. Copyright ©1996-2008 by Fuji Electric Systems Co., Ltd. All rights reserved. No part of this Catalog may be reproduced in any form or by any means without the express permission of Fuji Electric Systems Co., Ltd. 8. If you have any question about any portion in this Catalog, ask Fuji Electric Systems Co., Ltd. or its sales agents before using the product. Neither Fuji Electric Systems Co., Ltd. nor its agents shall be liable for any injury caused by any use of the products not in accordance with instructions set forth herein.
6
