Preview only show first 10 pages with watermark. For full document please download

Yamaha | Yht-550 | Quick-connect Guide

   EMBED


Share

Transcript

Quick-Connect Guide YHT-550 Home Theater in a Box ��� ���� ������� Yamaha created this package to greatly enhance your audio and home theater enjoyment. This Quick-Connect Guide will help you get started. Follow the steps to connect the speakers first. Then connect your DVD Player and other components. Refer to your Owner’s Manuals as well as those that came with your other components for complete instructions and precautions. Be sure that all components are not plugged in while making connections. You will need the following which are not included in the package: Phillips screwdriver, wire cutter/stripper, brackets, toggle bolts, molly anchor screws or sheet metal screws. 1 2 Your System   Room Layout        Inspect Contents After unpacking, inspect the contents to confirm you have the above items:  two front speakers,  three surround speakers,  one center speaker,  powered subwoofer,  HTR-5730 A/V Receiver with remote control,  DV-S5650 DVD Player with remote control,  speaker wire,  RCA cable,  audio/video RCA cable. Also included, but not shown, are AM and FM antennas and three related Owner’s Manuals. 3 Speaker Placement After connection of the speakers place them so they appear in the approximate positions as shown in the diagram above. 5 4 3 29/32" HTR-5730 Receiver Speaker Connections Connect Front Speakers Positive (+) side of the wire with white stripe attaches to (+) terminal. Negative (-) side attaches to (-) terminal. Connect Speaker Wire CAUTION Receiver must not be plugged in while connecting speakers. Cut speaker wire  to appropriate lengths for all speaker connections. Connect speaker wire for front , and surround speakers . The positive (+) side of the wire with the white stripe attaches to the red terminal. The negative (-) side attaches to the black terminal. (See your HTR-5730 Owner’s Manual for more information on speaker wire connections.) Mount Surround Speakers (optional) Fasten mounting screws into a firm wall or wall support. Leave 1/4” space between head and wall. Hang the keyholes on the speaker backs on the protruding screws. WARNING Please contact a reliable source about the best type of hardware for your particular wall’s construction. Secure installation is purchaser’s responsibility. See your Owner’s Manual for additional precautions. Connect Center Speaker Wire 6 Connect Center Speaker Wire as shown. The positive (+) side of the wire with the white stripe attaches to the red terminal. Place all speakers in desired location as shown in Step 2, Room Layout. 8 7 Connect Surround Speakers Positive (+) side of the wire with white stripe attaches to (+) terminal. Negative (-) side attaches to (-) terminal. CAUTION Receiver must not be plugged in while connecting speakers. YST-SW010 Subwoofer Connect Center Speaker Positive (+) side of the wire with white stripe attaches to (+) terminal. Negative (-) side attaches to (-) terminal. CAUTION Receiver must not be plugged in while connecting speakers. 9 AM Loop Antenna Indoor FM Antenna HTR-5730 Receiver Subwoofer Connection Connect RCA Cable Connect RCA cable  to subwoofer . Set subwoofer VOLUME control to half-way mark and POWER to OFF. Connect RCA cable to receiver from subwoofer. WARNING Components must not be plugged in while connecting them. Antenna Connection HTR-5730 Receiver Connect Antennas to Receiver Locate AM loop antenna and indoor FM antenna. Keeping receiver unplugged, connect as shown. For more information about obtaining clear reception and grounding, see your Owner’s Manual. 10 11 12 HTR-5730 Receiver HTR-5730 Receiver HTR-5730 Receiver DV-S5650 DVD Player AUDIO/VIDEO IN AUDIO/VIDEO OUT DV-S5650 DVD Player DVD Player Connection VCR Connect DVD Player Top: Connect RCA audio/video cables  to receiver: Yellow to “DVD,” Red to “Digital Input CD Coaxial” as shown, and leave White unplugged. NOTE Refer to page 41 of HTR-5730 Owner’s Manual for information about reassigning coaxial digital input. DVD Player Optical Connection (optional) Remove dust cap on optical input as shown on insets. Connect optical cable (not included) to receiver. Connect optical cable to DVD player from receiver. Bottom: Connect audio/video cables to DVD player from receiver: Yellow to “Video”, Red to “Coaxial”, and leave White unplugged. WARNING Components must not be plugged in while connecting them. Wait until all connections are made before plugging in your components. 13 14 VCR Connection Connect VCR (optional) Connect audio/video cables (not included) as shown. NOTE VCR shown is for illustration purposes only. When using a hi-fistereo VCR, set the Tuner/Line switch on the VCR to “Line” position to record from another source connected to the HTR-5730 receiver. 15 HTR-5730 Receiver HTR-5730 Receiver HTR-5730 Receiver DSS/Cable/ HDTV Tuner Box Audio/Video OUT Video Monitor Video Game Console DSS/Cable/HDTV Tuner Connection Video Game Console Connection Video IN Connect a Video Monitor Connect an RCA video cable (not included) to receiver Monitor OUT from your video monitor as shown . 18 17 16 Video Monitor Connection Connect DSS/Cable/HDTV Tuner Box (optional) Connect RCA audio/video cables (not included) and optional optical cable (not pictured) to “DTV/CBL” terminals on receiver to A/V OUT connections on Box as shown. Connect Game Console or Video Camera (optional) Connect RCA audio/video cables (not included) as shown. HTR-5730 Receiver HTR-5730 Receiver Audio IN Audio OUT MD/CD-R Recorder CD Player CD Player Connection MD/CD-R Player Connection Connect CD Player (optional) Connect RCA audio cables (not included) to “CD” terminals on receiver as shown. Connect MD/CD-R Recorder (optional) Connect RCA audio cables (not included) to “MD/CD-R” terminals on receiver as shown. Enjoy the Yamaha Home Theater Experience Be sure to put batteries in your remotes (see Owner’s Manuals for instructions). Refer to your Owner’s Manuals for each component in your system for more information. Now, relax and enjoy the unparalleled sound of your Yamaha Home Theater system. Part No. 550QCG rev1 04/04 Plug In Plug in the subwoofer, receiver, DVD player and other components. Power on the receiver first, then the subwoofer, and the others next. Adjust volume on the receiver. Please see each of your your respective Owner’s Manuals for recommended guidelines and settings. YAMAHA ELECTRONICS CORPORATION, USA 6660 Orangethorpe Avenue Buena Park, CA 90620 http://www.yamaha.com Phone: 1-800-292-2982 ©2004 Yamaha Electronics Corporation Printed in USA