You Can`t Beat The System: Rod Guard® Total

Transcript

LENCO WELDING ACCESSORIES LTD. SECTION 600 ® 36” Rod Guard® Cannister RG-300 Specifically designed for 36” fluxcoated bronze or brazing rod and tig filler-metals. Has .100” nominal wall thickness for added strength and durability. When long cap is removed, rod tips are exposed allowing easy accessibility to cannister's contents. Built with the same commitment to quality as the original Rod Guard® - with the form, fit and function you've come to expect. You Can't Beat The System: Rod Guard® Total Welding Rod Protection System. Rod Guard® Cannisters & Accessories provide great storage and inventory control for all your welding electrodes, rods and filler metals. And every one of them is made in America - and built to last. Each Rod Guard® Cannister is certified chloride-free and features a threaded cap with long-lasting neoprene seal to keep electrodes airtight - preventing them from being contaminated with atmospheric moisture. Because Rod Guard® Cannisters are constructed of high-impact polyethylene - which protect electrodes from damage - they can be reused for many years. 14” High Temperature Rod Guard® Cannister RG-100-HT Steel-lined and high-temperature resistant to 450° F. Holds up to 10 lbs. of 12” or 14” electrodes. 18” High Temperature Rod Guard® Cannister RG-200-HT Steel-lined and high-temperature resistant to 450° F. Designed specifically for 18” electrodes. 14” Rod Guard® Cannister RG-100 Holds up to 10 lbs. of 12” or 14” electrodes. Withstands 225° F. 18” Rod Guard® Cannister RG-200 Designed specifically for 18” electrodes. Withstands 225° F. © March 1997 ROD CASES PAGE 1 SECTION 600 LENCO WELDING ACCESSORIES LTD. Lincoln Electrodes Cannister ® ® LE100 Holds up to 10 lbs. of 12” or 14” electrodes. Withstands 225° F. Available in red with Lincoln Electrodes® Logo. Electrodes not included. Storage Rack RG-101 Perfect for organizing up to three cannisters at the job site or work station. Accommodates 14” or 18” cannisters. Cannisters sold separately. Belt Loop RG-103 Leather accessory makes convenient carrying case for cannister. Enables cannister to pivot without dumping contents. Swivel chain prevents loss of cannister cap. Rod and Dual Cases • A must for every welder • Makes a welder's job easier • Increases efficiency Model 61 Welder's Rod Case This Rod Holder is of heavy chrome leather construction and has a double thick bottom. A wide belt loop for belt suspension is provided. ROD CASES PAGE 2 Model 192 Dual Case Holds 10 lbs. of welding rod with chipping hammer at your side where you can grab them without looking. This case has a flat bottom and will stand if you choose not to wear it while working. Heavy full grain saddle leather. © March 1997