Your Smartphone Companion

Transcript

Jabra CLEAR Datasheet Jabra Universal Bluetooth® Mono Headset Compatible with any Bluetooth enabled device The smarter way to use your smartphone Free up your hands to swipe, browse and play with the new Jabra Clear, the Bluetooth® headset that lets you get more from your smartphone. By going Hands Free, you choose exactly when you want to manage your smartphone hands-on and when you want quick and easy access to your calls, songs and media without any wires or hassle. Answer and end calls directly from the Jabra Clear, and check battery levels and connectivity at a glance with the built-in status display. When you’re on the phone, DSP technology automatically adjusts the sound on your calls to best suit your surroundings, so that every word comes through in astounding detail. But it’s not all talk. Multimedia streaming lets you listen to music, GPS directions and even Internet radio directly through your Jabra Clear. Available in Glossy Black or Glossy White, so you can choose which color fits your style. You’ll never miss a beat with Jabra Clear. Reasons to choose the Jabra CLEAR HD Voice* enhances your sound experience on every conversation Stream your favorite multimedia including GPS, music & internet radio Talk while you type, browse and listen to all your media * Device & network dependent jabra.com LEARN MORE! The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by GN Netcom A/S is under license. (Design and specifications subject to change without notice) Your smartphone companion B A E F C G D A Answer/end button B On/off button C StatusDisplay™ with battery indicator and connection indicator D Charging socket E Volume up/down F Jabra Comfort Eargel™ G Jabra Earhook Quick Start Guide Using your headset Charge your headset While charging the headset, the battery indicator will show solid red. When the headset is charged, the battery indicator will turn solid green and turn off after 5 minutes. Charging time is approximately 2 hours. Pairing the headset with your phone First time pairing Turn the headset on - the headset is in automatic pairing mode when the Bluetooth® connection indicator is flashing blue. Later pairing ƒƒ Turn the headset on. Press and hold the answer/end button until the Bluetooth connection indicator is flashing blue. ƒƒ Activate Bluetooth on your phone. Then set your phone to search for Bluetooth wireless technology enabled devices and select Jabra Clear. ƒƒ Press ‘OK’ on the phone and if you are asked for a PIN code, confirm with PIN code 0000 (4 zeros). VOICE ALERTS ƒƒ Connection When your headset has successfully established connection with your phone and is ready to be used, the Jabra Voice Alert will say “connected”. ƒƒ Battery Low Alert When your headset has battery for less than 30 minutes the Jabra voice alert will say “low battery”. This message will be repeated with a ten minute interval. ƒƒ Redialing Alert When double tapping the answer/end button on your headset, the Jabra voice alert will say “redialing”. Wearing style Wear the Jabra Clear with or without an earhook. To wear with earhook, please click on for right or left ear wearing. PLEASE NOTE Before using your new Jabra Clear headset, you must charge the headset and pair it with your selected device. Features and Specifications ƒƒ ƒƒ ƒƒ ƒƒ ƒƒ ƒƒ Appealing design that fits most smartphones Clear sound with HD Voice* technology A2DP Technology for music streaming Voice Guidance for ease of use Jabra Status Display shows connection status and battery status Connects to 2 Bluetooth devices simultaneously with Multiuse™ Technology ƒƒ Ultimate Comfort Eargels for an all-day perfect fit ƒƒ Up to 8 hours of talk time and 8 days standby time ƒƒ Leightweight – only 0.02 lb * Device & network dependent jabra.com Datasheet_NA_Jabra_Clear_05/12 Turning your headset on and off Slide the “on/off” button to turn the headset on or off. The StatusDiplayTM will light up when the headset is turned on. ƒƒ Answer a call Tap the answer/end button on your headset to answer a call. ƒƒ End a call Tap the answer/end button to end an active call. ƒƒ Make a call The call will automatically transfer to you headset*. If it does not do so, please tap the answer/end button on your headset ƒƒ Reject a call* Press the answer/end button. ƒƒ Activate voice dialing* Press the answer/end button to activate the voice-dialing function in the mobile phone. Please consult your phone user manual for more info about using this feature. ƒƒ Redial last number* Double tap the answer/end button when the headset is connected to your phone. ƒƒ Adjust sound and volume* Tap the volume up or down to adjust the volume.