Transcript
Yukon Co., Ltd. Specialized Network Cabinets
功 鈺 精密機櫃的專家
Yukon, Specialized Network Cabinets
Yukon Co., Ltd. is a division of Shen Goan Precision Co., Ltd. Shen Goan was established in 1994 as a metal OEM/ODM manufacture. Since 1998, Shen Goan starts designing and manufacturing on Network Cabinets and Network Cabinet Relative Products. And in year 2000, Shen Goan reached its goal to successfully export its cabinets products to overseas market. Yukon Co., Ltd. was established by Shen Goan in year 2005 for serving domestic clients. For pass years, Yukon grows its market share year by year successfully. You are welcome to contact us for more details information about YUKON and our products.
Main Products: ‧Network Cabinet ‧Server Cabinet ‧Cabinet Shelf ‧Cabinet Sliding Shelf ‧Fan Units ‧Cabinet Accessories ‧OEM/ODM Metal Products ‧etc.
【Taipei Office】 Te l : +886-2-2871-7002 Fax:+886-2-2871-7003 e-mail:
[email protected] 【Factory】 No.47, Ln. 1274, Zhongzheng Rd., Zhongli Dist., Taoyuan City 320, Taiwan (R.O.C.) Tel:+886-3-422-3685 Fax:+886-3-422-7826 【web site】 www.yukon.tw
2
Category Index Network Cabinet ►► ►►
Y11 Networking Cabinet with 600mm Width Y22 Networking Cabinet with 600mm Width
4 6
Wall Mount Cabinet ►►
Wall Mount Single Section Cabinet
8
Wall Mount Bracket ►►
Wall Mount Bracket
10
Shelf ►► ►► ►► ►► ►►
Fixed Shelf Fixed Shelf with Mounting Ears Sliding Shelf Cantilever Shelf Adjustable Keyboard Panel
10 10 11 11 12
Fan Unit ►► ►► ►► ►► ►► ►►
Y11 and Y22 Cabinet Fan Unit Wall Mount Cabinet Fan Unit 1U Fan Unit with 2 Way Out and Thermostat 1U Fan Unit with Thermostat 1U Universal Fan Unit 3U Universal Fan Unit
12 12 13 14 15 15
Accessories ►►
►►
Metal Cable Management with Cap Metal Cable Management with Rings L Rail Monitor Mounting Bracket Angle Adjustable Monitor Mounting Bracket Flat Blank Panel Screw and Nut with Cushion Cabinet Side Doors Small Round Lock Wall Mount Cabinet Castors PDU (Power Distribution Unit)
15 16 16 17 17 17 18 18 18 18
►►
Products Index
19
►► ►► ►► ►► ►► ►► ►► ►►
3
Network Cabinet
Y11 Networking Cabinet with 600mm Width
Y11 Networking Cabinet with 600mm Width Standard: • Comply with ANSI/EIA RS-310-D, IEC297-2, DIN41494; PART1, DIN41494; PART7, ETSI standard.
Feature: • Exquisite design with precise dimension and craftsmanship; • Toughened glass front door with silk-screened flower pattern, door border and steel rear door; • Blue Zinc Mounting Profiles, free of static; • Adjustable feet and heavy duty castors are available at the same time; • Several lockable cable entry on top cover and bottom panel with adjustable sizes; • Efficient cabinet baying kit; • Removable side panels, easy to install and maintain; • Around 1/2~2/3 of original assembled volume when flat pack.
Material: • SPCC cold rolled steel; • Thickness: mounting profile 2.0mm, mounting angle 1.5mm, others 1.2mm.
Surface finish: • Degreasing, phosphoric, powder coated.
Degree of Protection: • IP20.
Loading Capacity: • Static loading: 800KG (with adjustable feet).
Front Door
Rear Door
Fan Unit (Optional)
Plate door border
Adjustable mounting profile and mounting angle
Cable entry
4
Y11 Networking Cabinet with 600mm Width
Network Cabinet
Main dimension
Specification Model No.
Capacity(U)
Width(mm)
Depth(mm)
Height(mm)
YK-CA8116622G
22
600
600
1166
YK-CA8116822G
22
600
800
1166
YK-CA8116632G
32
600
600
1610
YK-CA8116832G
32
600
800
1610
YK-CA8116642G
42
600
600
2055
YK-CA8116842G
42
600
800
2055
YK-CA8116042G
42
600
1000
2055
5
Network Cabinet
Y22 Networking Cabinet with 600mm Width
Y22 Networking Cabinet with 600mm Width Standard: • Comply with ANSI/EIA RS-310-D, IEC297-2, DIN41494; PART1, DIN41494; PART7, ETSI standard.
Feature: • Exquisite design with precise dimension and craftsmanship; • Hexagonal reticular high-density vented plate front door and rear door; • Blue zinc Mounting Profiles, free of static; • Adjustable feet and heavy duty castors are available at the same time; • Several lockable cable entry on top cover and bottom panel with adjustable sizes; • Efficient cabinet baying kit; • Removable side panels, easy to install and maintain; • Around 1/2~2/3 of original assembled volume when flat pack.
Material • SPCC cold rolled steel; • Thickness: mounting profile 2.0mm, mounting angle 1.5mm, others 1.2mm.
Surface finish: • Degreasing, phosphoric, powder coated.
Degree of Protection: • IP20.
Loading Capacity: • Static loading: 800KG (with adjustable feet).
Front Door
Rear Door
Fan Unit (Optional)
Plate door border
Adjustable mounting profile and mounting angle
Cable entry
6
Y22 Networking Cabinet with 600mm Width
Network Cabinet
Main dimension
Specification Model No.
Capacity(U)
Width(mm)
Depth(mm)
Height(mm)
YK-CA8226622G
22
600
600
1166
YK-CA8226822G
22
600
800
1166
YK-CA8226632G
32
600
600
1610
YK-CA8226832G
32
600
800
1610
YK-CA8226642G
42
600
600
2055
YK-CA8226842G
42
600
800
2055
YK-CA8226042G
42
600
1000
2055
7
Wall Mount Cabinet
Wall Mount Single Section Cabinet
Wall Mount Single Section Cabinet
Standard: • Comply with ANSI/EIA RS-310-D, DIN41497 part 1, IEC297-2, DIN41494 part 7, GB/T3047.2-92 standard.
Feature: • Welded frame, reliable structure; • Wall mounting installation; • Easy mounting installation;
Lockable fan holes and cable entry
Removable side panels
Install to wall
Easy installation, dust-proof
Mounting panel
Inside fixation by nuts to avoid accident
• 19＂ standard installation; • Removable side panels; • Knock out hole for entering cable on top, bottom and back side; • 2 x 120mm fan holes available; • Turning angle of front door is over 180 degrees.
Loading Capacity: • 60KG.
Degree of Protection: • IP20.
Material: • SPCC cold Rolled steel; • Thickness: Mounting profile: 1.5mm, others: 1.2mm.
Surface finish: • Degreasing, phosphoric, powder coated.
8
Wall Mount Single Section Cabinet
Wall Mount Cabinet
Main dimension
Specification Model No.
Capacity(U)
Width(mm)
Depth(mm)
Height(mm)
YK-WA6116406G
6
600
450
368
YK-WA6116409G
9
600
450
501
YK-WA6116609G
9
600
600
501
9
Shelf
Wall Mount Bracket
Wall Mount Bracket Material: • SPCC cold rolled steel, Thickness: 1.5mm.
Surface finish: • Degreasing, phosphoric, powder coated.
Dimension Specification Model No.
Capacity (U)
Width (mm)
Depth (mm)
Height (mm)
YK-WMB-2UK
2
521
305
90
YK-WMB-4UK
4
521
305
180
Fixed Shelf
Used for placing equipment. Material: • SPCC cold rolled steel t1.2.
Surface Finish: • Degreasing, phosphoric, powder coated.
Loading Capacity: • 60KG.
Dimension Specification Model No.
Specification
YK-SAS66G
Demension(MM)
Use
W
D1
D2
H
60 Fixed Shelf
472
350
260
45
For Yukon 600mm depth cabinet
YK-SAS68G
80 Fixed Shelf
472
550
460
45
For Yukon 800mm depth cabinet
YK-SAS60G
100 Fixed Shelf
472
730
640
45
For Yukon 1000mm depth cabinet
Fixed Shelf with Mounting Ears
Used for placing equipment. Material: • SPCC cold rolled steel t1.2.
Surface Finish: • Degreasing, phosphoric, powder coated.
Loading Capacity: • 60KG
Dimension Specification Model No.
Specification
YK-SAU66G YK-SAU68G
Demension(MM)
Use
W
D1
D2
H
60 Fixed Shelf with extendable mounting ears
483
350
550
45
19＂ Standard, extendable from 350mm to 550mm
80 Fixed Shelf with extendable mounting ears
483
550
750
45
19＂ Standard, extendable from 550mm to 750mm
10
Sliding Shelf
Sliding Shelf
Shelf
Used for placing equipment. Material: • SPCC cold rolled steel t1.2 /14＂2-section slide.
Surface Finish: • Degreasing, phosphoric, powder coated.
Parameter:
Dimension
• Flexing length: 210mm
Structure of sliding shelf
• Loading Capacity: 20KG
1. Guiding firder 2. 14" 2-section slide 3. Sliding loading plate
Specification Model No.
Specification
YK-SAL26G
Demension(MM)
Use
W
D1
D2
H
60 Sliding Shelf
472
350
380
45
For Yukon 600mm depth cabinet
YK-SAL28G
80 Sliding Shelf
472
550
580
45
For Yukon 800mm depth cabinet
YK-SAL20G
100 Sliding Shelf
472
710
740
45
For Yukon 1000mm depth cabinet
Cantilever Shelf
Used for placing equipment. Material: • SPCC cold rolled steel t1.2.
Surface Finish: • Degreasing, phosphoric, powder coated.
Loading Capacity:
Dimension
• 20KG
Specification Model No.
Specification
YK-SAC24G
Demension(MM)
Use
W
D
H
40 Cantilever Shelf
483
300
45
19＂ Standard
YK-SAC26G
60 Cantilever Shelf
483
350
88
19＂ Standard
YK-SAC28G
80 Cantilever Shelf
483
550
88
19＂ Standard
11
Shelf
Adjustable Keyboard Panel
Adjustable Keyboard Panel
Used for placing keyboard and mouse Material: • SPCC cold rolled steel t1.2/14＂2-section slide.
Surface Finish: • Degreasing, phosphoric, powder coated.
Parameter: • Flexing length: 210mm • Loading Capacity: 20KG
Dimension
Structure of Keyboard tray Specification Model No.
Specification
YK-SAK2UG
Keyboard tray
Demension(MM) W
D1
D2
H
483
350
683
45
Use 19＂ Standard
Y11 and Y22 Cabinet Fan Unit Material: • SPCC cold rolled steel
Thickness: • Power Cord Box:1.2mm • Fan Tray:0.8mm
Surface Finish: Specification
• Degreasing, phosphoric, powder coated.
Dimension
Model No.
Specification
YK-FA602G YK-FA804G
Dimension(mm)
Use
W
D
H
Fan Unit for 600mm cabinet 2 fans
298
130
44
For Yukon 600mm depth Cabinet
Fan Unit for 800mm cabinet 4 fans
298
263
44
For Yukon 800mm depth cabinet
Wall Mount Cabinet Fan Unit Cooling Fan:
Specification
• Low-noise, long lifespan
Dimension: • 120mm*120mm
Air flowing: • 50-110CBM/H
12
Model No.
Specification
YK-FA402
For Yukon Wall Mount Cabinet
1U Fan Unit with 2 Way Out and Thermostat
1U Fan Unit with 2 Way Out and Thermostat For network cabinet, adjust inner temperature. Material:
Specification
• SPCC cold rolled steel t1.2.
Surface Finish:
Model No.
Specification
YK-DTC000K
1U fan unit with 2 way out and thermostat
• Degreasing, phosphoric, powder coated.
Back side
Parameter S/N
Specification
Parameter
1
Temperature Range
0℃ ~ 50C℃
2
Input
PTC(10KΩ)
3
Output
2-way output
4
Consumption
3W
5
Power Supply
110VAC
6
Accurancy
±1℃
7
Ambient temperature
-10℃ ~ 70℃
8
Maintain temperature
-20℃ ~ 80℃
9
Ambient humidity
≦ 85%RH
Instruction: • Connection / wiring
Steps: 1. Connect the temperature sensor to the sensor of temperature controlling unit. 2. Connect the outside fan to the fan plug with special cable. 3. Connect the outside power to the power plug of temperature controlling unit with special cable.
1. Temperature controller 2. Power Supply 3. Temperature sensor 4. Fan unit
13
Fan Unit
Fan Unit
1U Fan Unit with Thermostat
1U Fan Unit with Thermostat For network cabinet, adjust inner temperature. Parameter:
Specification
• Period : 0℃~50C℃ • input : 115VAc.
Model No.
Specification
YK-DTC402K
1U fan unit with 4 fans and thermostat
Material: • SPCC cold rolled steel t1.2.
Surface Finish: • Degreasing, phosphoric, powder coated.
Operation Instruction for YK-DTC000K and YK-DTC402K I. Operation When complete all the connection steps above and confirm the connection is ok, then turn on the switch on the temperature controller and adjust the control parameter to appropriate temperature. II. Operation of the temperature controller 1. Look over and set parameter (1) Look over parameter. Under the state of non-setting, pressing key ▲ Show setting value of temperature. Pressing key ▼ display the different between the present temperature and temperature located, 2 second later, the screen will show the present temperature. (2) Set parameter ◆
method of entering into the state of customer setting: under non-setting state, press ＂SET ＂ key longer than 5 seconds to enter customer state of setting up, setting indicator to be on and to show the temperature at present.
◆
method of temperature setting: under the state of customer setting, press ▲ upwards or ▼ Downwards to adjust the temperature. Press one time to adjust 1 degree. It will be changed into rapid adjusting after pressing on it over 2 seconds.
◆
The method of exit from the state of customer setting: Press SET key over 5 seconds or no any operation within 30 seconds under state of customer setting, system will store current setting value and return to normal working condition.
2. Close and disconnection output relay (turn on and turn off fan) ◆
If practical temperature is higher than setting temperature, generator of fan would be connected. When practical temperature < (setting temperature minus return difference of temperature) generator of fan is disconnection.
◆
When practical temperature is higher than max temperature, alarm relay is connected, monitor display E2 and buzzer alarm, when practical temperature is lower than max limited temperature, alarm relay disconnected.
3. The warning function explaining ◆
Alarm for sensor fault: when sensor has errors ( short circuit or disconnection), LED shows E1 with flash, buzzer does alarm.
◆
Alarm for minimum value: when measuring value is lower than 0 ℃ , LED shows LL with flash. Buzzer does alarm.
◆ Alarm
for max limit of temperature: when practical value is higher than max limit of temperature, LED shows E1 with flash. Buzzer does alarm and alarm relay connected.
◆
Eliminated Alarm: Press any key to eliminate alarm sound under alarm condition. But, display and alarm state of relay will not be changed.
4. Safety regulation Danger Warning Attention
◆
please cut off power when wiring, no working with electricity.
◆
no overloading of relay.
◆
The voltage of up power should be conformed with it marked on the machine
◆
Only persons with professional qualification are able to install and adjust the machine.
◆
No use in the humidity environment. No use neither in the strong disturbance for electromagnetism environment nor strong erosion environment.
◆
please keep distance between sensor cable and power cable for avoiding impossible disturbance.
14
Fan Unit
1U Universal Fan Unit
1U Universal Fan Unit
For network cabinet.
Cooling Fan: • Lower-noise, long lifespan
Air flowing: • 50-110CBM/H
Surface: • Degreasing, phosphoric, power coated
Specification Model No.
Specification
YK-FM402G
1U Universal 2 Fan Unit
Dimension(mm) W
D
H
482
300
45
Use 19＂ Standard
3U Universal Fan Unit Cooling Fan: • Lower-noise, long lifespan
Dimension: • 120mm*120mm
Air flowing: • 50-110CBM/H
Specification Model No.
Specification
YK-FMH02K YK-FMH03K
Dimension(mm)
Use
W
D
3U Universal 2 Fan Unit
482
88
19＂ Standard
3U Universal 3 Fan Unit
482
133
19＂ Standard
Metal Cable Management with Cap Material:
Dimension
• SPCC cold rolled steel t1.2.
Surface Finish: • Degreasing, phosphoric, powder coated. 1U Metal cable management with cap
2U Metal cable management with cap
Specification Model No.
Specification
YK-WMHC-1UK YK-WMHC-2UK
Dimension(mm)
Use
W
D
H
1U cable management with cap
482
70
45
19＂ Standard
2U cable management with cap
482
70
88
19＂ Standard
15
Wire Management
Metal Cable Management with Rings
Metal Cable Management with Rings Material: • SPCC t1.5/metal cable management ring.
Surface Finish: • Degreasing, phosphoric, powder coated.
Specification Model No.
Specification
YK-WMHD-1UK YK-WMHD-2UK
L Rail
Dimension(mm)
Use
W
D
H
1U cable management with D rings
482
70
45
19＂ Standard
2U cable management with D rings
482
70
88
19＂ Standard
Fastened to mounting rails for supporting equipment. Material: • SPCC cold rolled steel t1.5.
Surface Finish: • Degreasing, phosphoric, powder coated.
Specification Model No.
Specification
YK-AYLR450G
Dimension(mm)
Use
W
D
H
45 L Rail, 2pcs per set
275
36
38
For YUKON 450 Cabinet
YK-AYLR600G
60 L Rail, 2pcs per set
350
36
38
For YUKON 600 Cabinet
YK-AYLR800G
80 L Rail, 2pcs per set
550
36
38
For YUKON 800 Cabinet
YK-AYLR000G
100 L Rail, 2pcs per set
750
36
38
For YUKON 1000 Cabinet
16
Monitor Mounting Bracket Angle Adjustable Monitor Mounting Bracket
Monitor Mounting Bracket Angle Adjustable Material: • SPCC cold rolled steel t1.5
Surface Finish: • Degreasing, phosphoric, powder coated
Parameter: • Maximum monitor width: 420mm • 2 mounting angles available 2 mounting angles
Specification
Dimension(mm)
Model No.
Specification
YK-AYMBKT-1K
Monitor Mounting Bracket Angle Adjustable
W
D
H
482
105
88
Use 19＂ Standard
Monitor Mounting Bracket Flat Material: • SPCC cold rolled steel t1.5
Surface Finish: • Degreasing, phosphoric, powder coated
Parameter: • Maximum monitor width: 530mm
Specification
• fixed mounting angles
Dimension(mm)
Model No.
Specification
YK-AYMBKT-2K
monitor mounting bracket flat type
W
D
482
133
Use 19＂ Standard
Blank Panel Material: • SPCC cold rolled steel t1.2
Surface Finish: • Degreasing, phosphoric, powder coated
Specification Model No.
Specification
YK-AYBP-1UK
Dimension(mm)
Use
W
D
1U Blank Panel
482
45
19＂ Standard
YK-AYBP-2UK
2U Blank Panel
482
88
19＂ Standard
YK-AYBP-4UK
4U Blank Panel
482
178
19＂ Standard
17
Accessories
Screw and Nut with Cushion
Screw and Nut with Cushion Specification
Specification: • Screws: M6*12; • Nut: M6;
Model No.
Specification
YK-AAM6100
M6 Gage, 10pcs per bag
• Washer: Φ6;
Surface Finish: • Plate nickel.
Cabinet Side Doors Small Round Lock Specification:
Specification
• Universal Type
Surface Finish:
Model No.
Specification
YK-AY-C4035L
Round Lock
• Plate Chrome
Wall Mount Cabinet Castors Specification:
Specification
• Universal Type
Surface Finish:
Model No.
Specification
YK-WA-Castor
2＂ Heavy Duty Castor
• Plate Chrome
PDU (Power Distribution Unit) • Outlet:6 UL type • Rated Voltage:110V • Max Current:15A • Max Output Power:1650W • Surge Protector: Yes • Main Switch: Yes with light
Specification Model No.
Specification
Overload Protector
Surge Protector
Use
YK-PDU615ASPK
6 Outlet PDU
Yes
Yes
19＂ Standard
YK-PDU815AK
8 Outlet PDU
Yes
N/A
19＂ Standard
18
Products Index YK-AAM6100 .........................18
YK-FA804G ...........................12
YK-AYBP-1UK .......................17
YK-FM402G ..........................15
YK-AYBP-2UK .......................17
YK-FMH02K ..........................15
YK-AYBP-4UK .......................17
YK-FMH03K ..........................15
YK-AY-C4035L .......................18
YK-PDU615ASPK .................18
YK-AYLR000G .......................16
YK-PDU815AK ......................18
YK-AYLR450G .......................16
YK-SAC24G .......................... 11
YK-AYLR600G .......................16
YK-SAC26G .......................... 11
YK-AYLR800G .......................16
YK-SAC28G .......................... 11
YK-AYMBKT-1K .....................17
YK-SAK2UG ..........................12
YK-AYMBKT-2K .....................17
YK-SAL20G ...........................11
YK-CA8116042G .....................5
YK-SAL26G ...........................11
YK-CA8116622G .....................5
YK-SAL28G ...........................11
YK-CA8116632G .....................5
YK-SAS60G ..........................10
YK-CA8116642G .....................5
YK-SAS66G ..........................10
YK-CA8116822G .....................5
YK-SAS68G ..........................10
YK-CA8116832G .....................5
YK-SAU66G ..........................10
YK-CA8116842G .....................5
YK-SAU68G ..........................10
YK-CA8226042G .....................7
YK-WA6116406G ....................9
YK-CA8226622G .....................7
YK-WA6116409G ....................9
YK-CA8226632G .....................7
YK-WA6116609G ....................9
YK-CA8226642G .....................7
YK-WA-Castor .......................18
YK-CA8226822G .....................7
YK-WMB-2UK ........................10
YK-CA8226832G .....................7
YK-WMB-4UK ........................10
YK-CA8226842G .....................7
YK-WMHC-1UK .....................15
YK-DTC000K .........................13
YK-WMHC-2UK .....................15
YK-DTC402K .........................14
YK-WMHD-1UK .....................16
YK-FA402 ..............................12
YK-WMHD-2UK .....................16
YK-FA602G ...........................12
Yukon Co., Ltd. Taipei Office Tel:+886-2-2762-7100 Fax:+886-2-2762-7300 e-mail:
[email protected]
Factory No.47, Ln. 1274, Zhongzheng Rd., Zhongli Dist., Taoyuan City 320, Taiwan (R.O.C.) Tel:+886-3-422-3685 Fax:+886-3-422-7826
web site: www.yukon.tw
