Zcg Connectors And Adapters

Transcript

Section 11 CONNECTORS and ADAPTORS SUMMARY QUANTITY DISCOUNTS ARE AVAILABLE FOR CONNECTORS AND ADAPTORS CONNECTORS ÂÂ EIA Flange ÂÂ 7/16" DIN ÂÂ N-Type ÂÂ BNC ÂÂ FME ÂÂ SMA and SMB ÂÂ TNC ÂÂ UHF ÂÂ Mini-UHF ÂÂ MMCX Micro Miniature ÂÂ Reverse for Data Transfer ÂÂ Car Radio ÂÂ 75 Ohm MISCELLANEOUS ITEMS ÂÂ Rubber Strain Relief ÂÂ Cable Feedthrough ÂÂ Crimp Sleeves ÂÂ Earth Lugs ADAPTORS ÂÂ Various Combination Adaptors ÂÂ Low PIM Adaptors ÂÂ Inter Series EIA Adaptors, 7/8" to 6-1/8" Flanged and Unflanged ZCG Scalar, Head Office, 1 Hall Street, PO Box 7, Lindenow, Victoria, 3865, Australia Telephone (03) 5157-1203, Fax (03) 5157-1641 [email protected] www.zcg.com.au Section 11 CONNECTORS and ADAPTORS EIA Flange Connectors Updated 23 February 2011 EIA connectors are ideal for high power transmission installations with metal to metal contact between cable and connector. No plastic parts are used. To join two cables with EIA connectors, two identical flange sockets are fitted to the cables to be joined. Cable can be prepared using a Trimming Tool or just usual hand tools. A captivated joining bullet is used to make a quick, easy and solderless connection between the two EIA flange centre conductors. Installation instructions are supplied with each connector. Cable sets can be assembled to your requirements. SPECIFICATIONS 78EIA1250 78EIA7850 158EIA15850 For Cable Type Suit 1/2" Foam Dielectric or Radiating Cable Suit 7/8" Foam Dielectric or Radiating Cable Suit 1-5/8" Foam Dielectric Cable Mating Interface 7/8" EIA 7/8" EIA 1-5/8" EIA Max Frequency 3.7 GHz 3.7 GHz 3.7 GHz Connector Plating Silver Silver Silver Outer Diameter 57 mm 57 mm 87 mm Length 85 mm 76.5 mm 120 mm Weight 280 grams 380 grams 1.14 kg JOINING KIT SUPPLIED 1 x Joining Bullet 2 x O-Rings 3 x Bolts and Nuts 6 x Washers 1 x Joining Bullet 2 x O-Rings 3 x Bolts and Nuts 6 x Washers 1 x Joining Bullet 2 x O-Rings 4 x Bolts and Nuts 8 x Washers Also available... 1680 Joining Bullet Only for EIA Connector to suit 7/8” or 1/2” Foam Dielectric or Radiating Cable EIA78 BULLET Joining Kit for EIA Connector to suit 7/8” or 1/2” Cable, contains : 1 x Joining Bullet 1 x O-Ring 3 x Bolts and Nuts 6 x Washers ZCG Scalar, Head Office, 1 Hall Street, PO Box 7, Lindenow, Victoria, 3865, Australia Telephone (03) 5157-1203, Fax (03) 5157-1641 [email protected] www.zcg.com.au Section 11 EIA Flange Connectors for Air Dielectric Cable CONNECTORS and ADAPTORS Updated 23 February 2011 These EIA connectors are designed especially to suit 7/8" or 1-5/8" Air Dielectric Cables. They are available individually, or can be supplied as part of a cable set assembled to your requirements. EIA Flange Air connectors feature chrome plated beryllium-copper inner conductors with teflon dielectrics and nickel silver plated bodies. They are ideal for high power transmission installations with metal to metal contact between cable and connector. No plastic parts are used. To join two Air Cables with EIA connectors, two identical flange sockets are fitted to the cables to be joined. Cable can be prepared using a Trimming Tool or just usual hand tools. A captivated joining bullet is used to make a quick, easy and solderless connection between the two EIA flange centre conductors. Installation instructions are supplied with each connector. SPECIFICATIONS 78EIA7850-A 158EIA15850-A For Cable Type Suit 7/8" Air Dielectric or Air Radiating Cable Suit 1-5/8" Air Dielectric Cable Mating Interface 7/8" EIA, Air Stop 1-5/8" EIA, AIr Stop Max Frequency 3.7 GHz 3.7 GHz Connector Plating Chrome Chrome Outer Diameter 57 mm 87 mm Length 76.5 mm 120 mm Weight 700 grams 1.450 kg JOINING KIT SUPPLIED 1 x Joining Bullet 1 x O-Ring 3 x Bolts and Nuts 6 x Washers 1 x Joining Bullet 1 x Allen Key 1 x O-Ring 4 x Bolts and Nuts 8 x Washers ZCG Scalar, Head Office, 1 Hall Street, PO Box 7, Lindenow, Victoria, 3865, Australia Telephone (03) 5157-1203, Fax (03) 5157-1641 [email protected] www.zcg.com.au Section 11 CONNECTORS and ADAPTORS 7/16” DIN Connectors 50 Ohm Updated 23 February 2011 These 7/16" DIN Male and Female connectors will suit 7/8" and 1/2" flexible foam dielectric coaxial cables as indicated below. 716DINM7850 716DINM1250 7/16" DIN MALE Connector to suit 7/8" Flexible Cable, 2 kW max power 7/16" DIN MALE Connector to suit 1/2" Flexible Cable 2 kW max power Tri-Metal Plated Low PIM Tri-Metal Plated Low PIM 716DINM1250SF 7/16" DIN MALE Connector to suit 1/2" Super Flexible Cable, 2 kW max power 716DINRAM1250 Right-Angle 7/16" DIN MALE Connector to suit 1/2" Flexible Cable, 2 kW max power Tri-Metal Plated Low PIM 716DINF7850 716DINF1250 7/16" DIN FEMALE Connector to suit 7/8" Flexible Cable, 2 kW max power 7/16" DIN FEMALE Connector to suit 1/2" Flexible Cable, 2 kW max power Tri-Metal Plated Low PIM Tri-Metal Plated Low PIM 8215 Flange Mount 7/16" DIN FEMALE Connector with 'O' Ring supplied, 2 kW max power ZCG Scalar, Head Office, 1 Hall Street, PO Box 7, Lindenow, Victoria, 3865, Australia Telephone (03) 5157-1203, Fax (03) 5157-1641 [email protected] www.zcg.com.au 716DINF1250SF 7/16" DIN FEMALE Connector to suit 1/2" Super Flexible Cable, 2 kW max power Tri-Metal Plated Low PIM Section 11 CONNECTORS and ADAPTORS N-Type Connectors to suit 1-1/4" Corrugated Cable 50 Ohm Updated 23 February 2011 These 50 ohm N-Type connectors will suit 1-1/4" corrugated cable. 8255 N-Type MALE Connector to suit 1-1/4" Corrugated Cable ZCG Scalar, Head Office, 1 Hall Street, PO Box 7, Lindenow, Victoria, 3865, Australia Telephone (03) 5157-1203, Fax (03) 5157-1641 [email protected] www.zcg.com.au C158.00401 PLAST 2000 Connector Glue is recommended to keep N-Type connectors for 1-1/4" cable totally waterproof 8256 N-Type FEMALE Connector to suit 1-1/4" Corrugated Cable Section 11 CONNECTORS and ADAPTORS N-Type Connectors to suit 7/8" and 1/2" Cable 50 Ohm Updated 23 February 2011 These 50 ohm N-Type connectors will suit 7/8" flexible foam dielectric, 1/2" flexible foam dielectric or 1/2" super flexible foam dielectric cable as indicated below. NM7850 NM1250 NM1250SF N-Type MALE Connector to suit 7/8" Flexible Cable N-Type MALE Connector to suit 1/2" Flexible Cable N-Type MALE Connector to suit 1/2" Super Flexible Cable Tri-Metal Plated Low PIM Tri-Metal Plated Low PIM Tri-Metal Plated Low PIM 8237 Right-Angle N-Type MALE Connector to suit 1/2" Flexible Cable Tri-Metal Plated Low PIM NF7850 N-Type FEMALE Connector to suit 7/8" Flexible Cable ZCG Scalar, Head Office, 1 Hall Street, PO Box 7, Lindenow, Victoria, 3865, Australia Telephone (03) 5157-1203, Fax (03) 5157-1641 [email protected] www.zcg.com.au NF1250 N-Type FEMALE Connector to suit 1/2" Flexible Cable NF1250SF N-Type FEMALE Connector to suit 1/2" Super Flexible Cable Section 11 N-Type Connectors to suit RG and RU400 Cables 50 Ohm CONNECTORS and ADAPTORS Updated 30 March 2012 – Page 1 of 2 – These 50 ohm N-Male connectors will suit RG and RU400 type coaxial cables as indicated below. Cable preparation trim dimensions are provided to assist in properly fitting each particular connector. 7937 A 7937-2 7932-4 N-Type MALE Crimp Connector to suit RG213 cable N-Type MALE Crimp Connector to suit RG214 cable Right-Angle N-Type MALE Crimp Connector to suit RG214 cable Tri-Metal Plated Low PIM Tri-Metal Plated Low PIM Tri-Metal Plated Low PIM A = 15.4 mm B = 7.9 mm C = 4.0 mm B C A A = 15.4 mm B = 7.9 mm C = 4.0 mm B C 8283 A = 20.0 mm A C = 5.0 mm C 7913 8226 N-Type MALE Crimp Connector to suit RG223 cable N-Type MALE Solder Clamp Style Connector to suit RG213 or RG214 cable N-Type MALE Crimp Connector to suit RU400 or RG8 cable Tri-Metal Plated Low PIM Tri-Metal Plated Low PIM Tri-Metal Plated Low PIM A = 10.0 mm A A = 8.5 mm A C = 5.0 mm C 7930 7933 8286 N-Type MALE Solderless Clamp Style Connector to suit RU400 or RG8 cable Right-Angle N-Type MALE Connector to suit RU400 or RG8 cable, crimp with solder pin Tri-Metal Plated Low PIM Tri-Metal Plated Low PIM A A A = 9.0 mm B Fitting Instructions are supplied C = 7.0 mm C C 7917 N-Type MALE Crimp Connector to suit RG58 cable C = 5.0 mm C 7930-4 A = 12.0 mm A C = 4.0 mm C N-Type MALE Solder Connector to suit RU400 or RG8 cable A = 15.0 mm A A = 23.0 mm B = 9.0 mm C = 4.0 mm 8219 Right-Angle N-Type MALE Solder Connector to suit RG58 cable N-Type MALE Solder Connector to suit RG58 cable Tri-Metal Plated Low PIM A A = 14.2 mm B = 6.7 mm C = 3.5 mm B C A = 7.0 mm A C A B C = 4.0 mm C 7923-3 A = 15.0 mm B = 5.0 mm C = 3.0 mm 8278 N-Type MALE Crimp Connector to suit RG174 or RG316 cable N-Type MALE Crimp Connector to suit RG59 cable Tri-Metal Plated Low PIM A B C A = 14.2 mm B = 6.7 mm C = 3.5 mm ZCG Scalar, Head Office, 7 Hall Street, PO Box 7, Lindenow, Victoria, 3865, Australia Telephone (03) 5157-1203, Fax (03) 5157-1641 [email protected] www.zcg.com.au A B C A = 10.0 mm B = 5.0 mm C = 3.0 mm Section 11 N-Type Connectors to suit RG and RU400 Cables 50 Ohm CONNECTORS and ADAPTORS Updated 30 March 2012 – Page 2 of 2 – These 50 ohm N-Female connectors will suit RG and RU400 type coaxial cables as indicated below. Cable preparation trim dimensions are provided to assist in properly fitting each particular connector. 7939 7916 N-Type FEMALE Crimp Connector to suit RG213 cable A = 10.0 mm A C = 4.0 mm C N-Type FEMALE Bulkhead Mount Solder Connector to suit RG214 cable N-Type FEMALE Solder Connector to suit RG213 cable A = 15.4 mm A 7932 C = 5.0 mm C 7932-3 C = 4.0 mm C 8227 N-Type FEMALE Bulkhead Mount Crimp Connector to suit RG214 cable 7938 N-Type FEMALE Crimp Connector to suit RU400 or RG8 cable N-Type FEMALE Crimp Connector to suit RG58 cable Tri-Metal Plated Low PIM A A = 18.0 mm B = 5.8 mm C = 4.5 mm B C A C 7998 B C A = 15.2 mm B = 7.7 mm C = 5.0 mm A C C A = 14.5 mm B = 7.0 mm C = 5.0 mm A A = 7.0 mm B = 2.0 mm C = 5.0 mm B C C = 4.0 mm ZCG Scalar, Head Office, 7 Hall Street, PO Box 7, Lindenow, Victoria, 3865, Australia Telephone (03) 5157-1203, Fax (03) 5157-1641 [email protected] A = 8.0 mm A C = 4.0 mm C 7915 7925 N-Type FEMALE Flange Mount Receptacle www.zcg.com.au N-Type FEMALE Flange Mount Solder Connector to suit RG58 cable N-Type FEMALE Solder Connector to suit RG59 cable 7914 C 7997 7923-2 N-Type FEMALE Crimp Connector with Solder Pin to suit RG59 cable B C A = 7.0 mm B = 2.0 mm C = 5.0 mm B A = 19.0 mm B = 8.0 mm C = 4.0 mm B N-Type FEMALE Solder Connector to suit RG58 cable 7923 A A 7918 N-Type FEMALE Bulkhead Mount Crimp Connector to suit RG58 cable A A = 14.0 mm B = 9.0 mm C = 5.0 mm B N-Type Cable Termination Screw Mount N-Type FEMALE SHM Receptacle C = 4.0 mm C 7984 N-Type FEMALE Cap and Chain Section 11 BNC Connectors 50 Ohm CONNECTORS and ADAPTORS Updated 25 November 2011 These 50 ohm BNC Male and Female connectors will suit RG and RU400 type coaxial cables as indicated below. Cable preparation trim dimensions are provided to assist in properly fitting each particular connector. 7936 7936-2 BNC MALE Solder Connector to suit RG213 cable 7965 BNC MALE Solder Connector to suit RU400 cable BNC MALE Crimp Connector to suit RG58 cable Tri-Metal Plated Low PIM A Tri-Metal Plated Low PIM A = 15.0 mm B = 7.0 mm C = 8.0 mm B C A A = 15.0 mm B = 7.0 mm C = 8.0 mm B C 7988 A C 7920 REVERSE BNC MALE Crimp Connector to suit RG58 cable A = 16.1 mm B = 8.6 mm C = 4.0 mm B 7999 BNC MALE Square Cut Solder Connector to suit RG58 cable BNC MALE Solder Connector to suit RG58 cable Tri-Metal Plated Low PIM A A = 18.0 mm B = 9.0 mm C = 4.0 mm B C A B C 7921-3 A = 17.0 mm B = 12.0 mm C = 3.0 mm B C A C 8265 C A = 10.0 mm B = 5.0 mm C = 4.5 mm BNC Right-Angle MALE Solder Connector to suit RG174 or RG316 cable A = 11.4 mm A C = 3.7 mm C 7962 BNC FEMALE Crimp Connector to suit RG58 cable 7929 BNC FEMALE Flange Mount Receptacle BNC FEMALE Bulkhead Mount Connector A = 18.0 mm A C = 3.0 mm C 7951 BNC FEMALE Bulkhead Mount Connector to suit RG174 or RG316 cable Tri-Metal Plated Low PIM B C A = 11.5 mm B = 7.0 mm C = 4.0 mm ZCG Scalar, Head Office, 7 Hall Street, PO Box 7, Lindenow, Victoria, 3865, Australia Telephone (03) 5157-1203, Fax (03) 5157-1641 [email protected] www.zcg.com.au B A = 15.0 mm B = 7.0 mm C = 8.0 mm B BNC MALE Solder Connector to suit RG174 or RG316 cable 7921-2 A A 8269 BNC Right-Angle MALE Crimp Connector to suit RG59 cable A A = 13.0 mm B = 9.0 mm C = 4.0 mm C C = 5.0 mm Section 11 FME Connectors 50 Ohm CONNECTORS and ADAPTORS Updated 23 February 2011 These 50 ohm FME connectors will suit RG type coaxial cables as indicated below. Cable preparation trim dimensions are provided to assist in properly fitting each particular connector. 7906 7976 FME MALE Crimp Connector to suit RG58 cable A B C A = 15.0 mm B = 6.5 mm C = 4.0 mm FME FEMALE Crimp Connector to suit RG174 or RG316 cable FME FEMALE Crimp Connector to suit RG58 cable A ZCG Scalar, Head Office, 1 Hall Street, PO Box 7, Lindenow, Victoria, 3865, Australia Telephone (03) 5157-1203, Fax (03) 5157-1641 [email protected] www.zcg.com.au 8273 B C A = 15.0 mm B = 6.5 mm C = 4.0 mm A B C A = 16.0 mm B = 6.0 mm C = 4.0 mm Section 11 SMA and SMB Connectors 50 Ohm CONNECTORS and ADAPTORS Updated 24 November 2011 These 50 Ohm SMA and SMB Male and Female connectors will suit RG type coaxial cables as indicated below. Cable preparation trim dimensions are provided to assist in properly fitting each particular connector. 7963-7 A B C Right-Angle SMA MALE Connector to suit RG58 cable, Crimp Sleeve with Solder Pin A = 12.1 mm B = 5.1 mm C = 3.3 mm C C A = 11.0 mm B = 5.0 mm C = 3.0 mm 8268 A = 13.0 mm B = 5.5 mm C = 2.5 mm 7901-2 A A = 13.0 mm B = 5.5 mm C = 2.5 mm B C SMA FEMALE Panel Mount Solder Connector C = 4.0 mm C 8279 8301 SMB MALE Crimp Connector to suit RG174 or RG316 cable B C A = 11.1 mm B = 4.5 mm C = 2.5 mm ZCG Scalar, Head Office, 7 Hall Street, PO Box 7, Lindenow, Victoria, 3865, Australia Telephone (03) 5157-1203, Fax (03) 5157-1641 [email protected] www.zcg.com.au SMA FEMALE Crimp Connector to suit RG174 or RG316 cable Reverse SMA FEMALE Crimp Connector to suit RG58 cable 7950 A C A = 13.0 mm B = 5.5 mm C = 2.5 mm SMA MALE Crimp Connector to suit RG178 cable, Tri-Metal Plated Low PIM SMA FEMALE Crimp Connector to suit RG58 cable B B 8225 7963-2 A A C = 3.0 mm C SMA MALE Crimp Connector to suit RG174 or RG316 cable B Reverse SMA MALE Crimp Connector to suit RG58 cable A = 14.0 mm A 7901 A 7963-4 7963-3 SMA MALE Crimp Connector with Crimp Pin to suit RG58 cable, Gold Plated FAKRA SMB FEMALE Crimp Connector with solder pin and violet clip to suit RG58, RG174 and RG316 cable A B C A = 9.0 mm B = 4.0 mm C = 2.0 mm A B C A = 11.0 mm B = 5.0 mm C = 3.0 mm Section 11 TNC Connectors 50 Ohm CONNECTORS and ADAPTORS Updated 24 November 2011 These 50 ohm TNC male and female connectors will suit RG type coaxial cables as indicated below. Cable preparation trim dimensions are provided to assist in properly fitting each particular connector. 7930-5 7943 TNC MALE Crimp Connector to suit RU400 or RG8 cable A = 15.0 mm A C A B C = 5.0 mm C 7943-4 B C A = 15.5 mm B = 6.5 mm C = 3.5 mm C A = 15.5 mm B = 6.5 mm C = 3.5 mm A A = B = C = B C A = 15.5 mm B = 6.5 mm C = 3.5 mm 19 mm 7 mm 4 mm 7967 7907-2 TNC FEMALE Bulkhead Mount Connector to suit RG58 cable, Crimp Sleeve with Solder Pin TNC FEMALE Crimp Connector to suit RG58 cable A B C A = 15.5 mm B = 6.5 mm C = 3.5 mm ZCG Scalar, Head Office, 7 Hall Street, PO Box 7, Lindenow, Victoria, 3865, Australia Telephone (03) 5157-1203, Fax (03) 5157-1641 [email protected] www.zcg.com.au B C Reverse TNC MALE Crimp Connector to suit RG58 cable TNC MALE Crimp Connector to suit RG174 or RG316 cable B A A = 16.0 mm A C A = 15.5 mm B = 6.5 mm C = 3.5 mm 7922 8224 A TNC MALE Crimp Connector to suit RG58 cable (Black) 7902 TNC MALE Crimp Connector with Crimp Pin to suit RG58 cable A 7943-3 TNC MALE Crimp Connector with Solder Pin to suit RG58 cable C = 4.0 mm TNC MALE Solder Connector to suit RG58 cable A B C A = 10.0 mm B = 5.0 mm C = 5.0 mm Section 11 UHF Connectors 50 Ohm CONNECTORS and ADAPTORS Updated 23 February 2011 These 50 ohm UHF connectors will suit RG type coaxial cables as indicated below. Cable preparation trim dimensions are provided to assist in properly fitting each particular connector. 7910 7904 UHF MALE Crimp Connector to suit RG213 cable A = 26.0 mm A C = 21.0 mm C UHF MALE Solder Connector Nut Clamped to suit RG213, RG214, RU400, RG11 or RG8 cable UHF MALE Solder Connector to suit RG213 cable A = 35.0 mm A 7908 C = 17.0 mm C 7942 C = 25.0 mm C 7900 UHF MALE Crimp Connector to suit RG58 cable A = 35.0 mm A 7909 UHF MALE Solder Connector Nut Clamped to suit RG58 cable UHF MALE Solder Connector to suit RG58 cable Known as PL259 A = 35.0 mm A A B C = 25.0 mm C C 7912 A = 17.0 mm C = 4.0 mm C A A = 25.0 mm B = 23.0 mm C = 19.0 mm B C 7934 UHF FEMALE Solder Connector Nut Clamped to suit RG213 cable A A = 20.0 mm B = 15.0 mm C = 13.0 mm 7911-2 UHF FEMALE Solder Connector Nut Clamped to suit RG58 cable UHF FEMALE Bulkhead Mount Body Only No Nut or Washer A = 17.0 mm A C C = 4.0 mm C = 4.0 mm C 7911 7994 UHF Right-Angle FEMALE Solder Mounting Base to suit RG58 cable UHF FEMALE SHM Receptacle Mounts to any bracket with 17 mm diam hole A C C = 4.0 mm ZCG Scalar, Head Office, 1 Hall Street, PO Box 7, Lindenow, Victoria, 3865, Australia Telephone (03) 5157-1203, Fax (03) 5157-1641 [email protected] www.zcg.com.au B C A = 15.0 mm B = 10.0 mm C = 4.5 mm Section 11 Mini-UHF Connectors 50 Ohm CONNECTORS and ADAPTORS Updated 23 February 2011 These 50 Ohm Mini-UHF connectors will suit RG58 coaxial cable. Cable preparation trim dimensions are provided to assist in properly fitting each particular connector. 7941-2 7941-1 Mini-UHF MALE Crimp Connector to suit RG58 cable A B C A = 13.0 mm B = 5.5 mm C = 3.0 mm ZCG Scalar, Head Office, 1 Hall Street, PO Box 7, Lindenow, Victoria, 3865, Australia Telephone (03) 5157-1203, Fax (03) 5157-1641 [email protected] www.zcg.com.au 7941 Mini-UHF FEMALE Panel Flange Mount Solder Connector to suit RG58 cable Mini-UHF FEMALE Crimp Connector to suit RG58 cable A = 15.0 mm A C C = 4.0 mm C C = 4.0 mm Section 11 CONNECTORS and ADAPTORS MMCX Micro Miniature Connectors 50 Ohm Updated 23 February 2011 MMCX are a micro miniature connector designed for applications up to 6 GHz requiring the smallest dimensions. Robust and durable, they are ideal for printed circuit boards, personal computer cards, cellular base stations, cellular phones and personal communicators. MMCX connectors are also used in GPS global positioning systems and wireless LAN (WLAN) applications. Cable preparation trim dimensions are provided. 8242 Right-Angle MMCX Male Solder Connector to suit RG174 or RG316 Cable A B C ZCG Scalar, Head Office, 1 Hall Street, PO Box 7, Lindenow, Victoria, 3865, Australia Telephone (03) 5157-1203, Fax (03) 5157-1641 [email protected] www.zcg.com.au A = 9.0 mm B = 2.0 mm C = 1.0 mm Section 11 Reverse Connectors 50 Ohm CONNECTORS and ADAPTORS Updated 23 February 2011 Generally used for data transfer applications, these 50 ohm Reverse connectors will suit RG58 coaxial cable. Cable preparation trim dimensions are provided to assist in properly fitting each particular connector. 7988 7963-4 Reverse BNC MALE Crimp Connector to suit RG58 cable A B C A = 18.0 mm B = 9.0 mm C = 4.0 mm Reverse SMA MALE Crimp Connector to suit RG58 cable A B C 7902 8268 Reverse TNC MALE Crimp Connector to suit RG58 cable A B C A = 15.5 mm B = 6.5 mm C = 3.5 mm ZCG Scalar, Head Office, 1 Hall Street, PO Box 7, Lindenow, Victoria, 3865, Australia Telephone (03) 5157-1203, Fax (03) 5157-1641 [email protected] www.zcg.com.au A = 13.0 mm B = 5.5 mm C = 2.5 mm Reverse SMA FEMALE Crimp Connector to suit RG58 cable A B C A = 13.0 mm B = 5.5 mm C = 2.5 mm Section 11 Car Radio Connectors to suit RG58 cable CONNECTORS and ADAPTORS Updated 23 February 2011 These Car Radio connectors will suit RG58 coaxial cable. Cable preparation trim dimensions are provided to assist in properly fitting the connectors. 7966 7966-2 Car Radio MALE Solder Connector No Shell to suit RG58 cable Car Radio MALE Solderless Connector to suit RG58 cable A B A = 7.0 mm B = 5.0 mm A B C A = 40.0 mm B = 13.0 mm C = 20.0 mm Components of 7966 Car Radio Solderless Connector ZCG Scalar, Head Office, 1 Hall Street, PO Box 7, Lindenow, Victoria, 3865, Australia Telephone (03) 5157-1203, Fax (03) 5157-1641 [email protected] www.zcg.com.au Section 11 CONNECTORS and ADAPTORS 75 Ohm Connectors Updated 24 November 2011 This selection of 75 Ohm Male and Female connectors will suit the coaxial cables indicated below. Cable preparation trim dimensions are provided to assist in properly fitting each particular connector. 8266 8262 N-Type MALE Solder Connector to suit 75 Ohm RU400 cable, Nut Clamped 8263 N-Type FEMALE Crimp Connector to suit RG6 cable, 75 Ohm N-Type FEMALE Crimp Connector to suit RG11 cable, 75 Ohm Tri-Metal Plated Low PIM A A = 10.0 mm B = 5.0 mm C = 4.0 mm B C 8257 N-Type FEMALE Crimp Connector to suit RG59 cable, 75 Ohm A = 13.0 mm C C = 2.5 mm C 8261 A A = 13.0 mm A C = 3.0 mm 8257-2 Pin for N-Type Female Crimp Connector to suit RG11 cable, 75 Ohm, Gold Plated Brass Pin for N-Type Female Crimp Connector to suit RG59 or RG11 cable, 75 Ohm A = 13.0 mm A C = 2.5 mm C 8267 7978-3 BNC MALE Solder Connector to suit 75 Ohm RU400 cable, Nut Clamped 7978-2 BNC MALE Crimp Connector to suit RG11 cable, 75 Ohm BNC MALE Crimp Connector to suit RG59 cable, 75 Ohm Tri-Metal Plated Low PIM A A = 10.0 mm B = 5.0 mm C = 5.0 mm B C A C 7962-2 C = 4.0 mm ZCG Scalar, Head Office, 7 Hall Street, PO Box 7, Lindenow, Victoria, 3865, Australia Telephone (03) 5157-1203, Fax (03) 5157-1641 [email protected] www.zcg.com.au C = 2.5 mm 7962-3 BNC FEMALE Flange Mount Connector, 75 Ohm C A = 14.0 mm BNC FEMALE Bulkhead Mount Connector, 75 Ohm C C = 4.0 mm A = 13.0 mm A C C = 3.0 mm Section 11 CONNECTORS and ADAPTORS Strain Relief, Cable Feedthrough, Crimp Sleeves and Earth Lugs Updated 24 November 2011 Rubber Strain Relief 7945 Rubber Strain Relief to suit RG58 cable Cable Feedthrough 7932-2 5391 Pack of 100 Nitrile Rubber Firewall Grommets with internal 5.5 mm diameter hole to suit RG58 cable. Cable Feedthrough Crimp to suit RG214 cable Fit 9.5 mm diameter hole and up to 3 mm wall plate thickness. Crimp Sleeves 7932-6 Crimp Sleeve to suit RG214 cable 7928-2 Crimp Sleeve to suit RG58 cable 7928 Crimp Sleeve to suit RG59 cable Earth Lugs 7955 Earth Lug Solder or Crimp suit 5 mm stud 2 mm wire 7954 Earth Lug Solder or Crimp suit 6 mm stud 5.5 mm wire ZCG Scalar, Head Office, 7 Hall Street, PO Box 7, Lindenow, Victoria, 3865, Australia Telephone (03) 5157-1203, Fax (03) 5157-1641 [email protected] www.zcg.com.au 7953 Earth Lug Solder or Crimp suit 6 mm stud 3 mm wire 7972 Earth Lug Solder or Crimp suit 6 mm stud 7 mm wire 7956 Earth Lug Silver Plated Solder or Crimp suit 6 mm stud 4.5 mm wire Section 11 CONNECTORS and ADAPTORS Adaptors Various Combinations Updated 23 February 2011 – Page 1 of 2 – This selection of Adaptors consists of various connector combinations. Please note that more Low PIM and Inter Series EIA Adaptors also appear on the following pages of this catalogue. If the particular combination you require is not listed, then please contact us. 7973 N-Type MALE to N-Type MALE Adaptor 7944 Right-Angle N-Type MALE to N-Type FEMALE Adaptor 7986-2 Bulkhead Flange Mount N-Type FEMALE to N-Type FEMALE Adaptor 7961 UHF FEMALE to BNC MALE Adaptor 7944-1 Right-Angle UHF MALE to UHF FEMALE Adaptor 7905 BNC FEMALE to BNC FEMALE Adaptor 7975 N-Type MALE to BNC FEMALE Adaptor 7959-2 N-Type FEMALE to N-Type FEMALE Adaptor 7964-2 N-Type FEMALE to UHF MALE Adaptor 7959 UHF FEMALE to UHF FEMALE Adaptor 8270 Right-Angle BNC MALE to BNC FEMALE Adaptor 7895 Bulkhead Mount BNC FEMALE to BNC FEMALE Adaptor 7964 N-Type MALE to UHF FEMALE Adaptor 7986 Bulkhead Mount N-Type FEMALE to N-Type FEMALE Adaptor 7974 N-Type FEMALE to TNC MALE Adaptor 7946 Tee UHF FEMALE to UHF MALE to UHF FEMALE Adaptor 7961-2 BNC FEMALE to UHF MALE Adaptor 8275 FME MALE to SMA MALE Adaptor Continued... ZCG Scalar, Head Office, 1 Hall Street, PO Box 7, Lindenow, Victoria, 3865, Australia Telephone (03) 5157-1203, Fax (03) 5157-1641 [email protected] www.zcg.com.au Section 11 CONNECTORS and ADAPTORS Adaptors Various Combinations Updated 23 February 2011 – Page 2 of 2 – 7977-2 FME MALE to TNC MALE Adaptor 8282 FME FEMALE to SMA FEMALE Adaptor 8280 SMB MALE to SMB MALE Adaptor ZCG Scalar, Head Office, 1 Hall Street, PO Box 7, Lindenow, Victoria, 3865, Australia Telephone (03) 5157-1203, Fax (03) 5157-1641 [email protected] www.zcg.com.au 8281 SMB FEMALE to SMB FEMALE Adaptor 8274 Right-Angle SMA MALE to SMA FEMALE Adaptor 7996 TNC FEMALE to TNC FEMALE Adaptor Section 11 CONNECTORS and ADAPTORS Adaptors Tri-Metal Plated, Low PIM N-Type and 7/16" DIN Updated 23 February 2011 Passive Intermodulation Distortion (PIM) is a phenomenon that occurs when two signals present on a transmission line mix in a non-linear manner. This mixing creates additional frequency components that may fall within a specified band, causing interference. Poorly designed or assembled connectors, cable assemblies or antennas can generate PIM. For connectors and adaptors, the metal-to-metal joints are the most significant PIM contributors. Steel, aluminium and stainless steel joints generate higher PIM. Gold, silver, copper, brass and copper-beryllium joints generate low PIM. This range of Brass Tri-Metal Plated Adaptors are specifically designed to deliver genuine low PIM performance. 8228 8230 N-Type MALE to N-Type FEMALE Adaptor N-Type MALE to N-Type MALE Adaptor N-Type FEMALE to N-Type FEMALE Adaptor Tri-Metal Plated Low PIM Tri-Metal Plated Low PIM Tri-Metal Plated Low PIM 8231 8232 8233 N-Type MALE to 7/16" DIN FEMALE Adaptor N-Type FEMALE to 7/16" DIN MALE Adaptor N-Type MALE to 7/16" DIN MALE Adaptor Tri-Metal Plated Low PIM Tri-Metal Plated Low PIM Tri-Metal Plated Low PIM 8234 8235 8236 7/16" DIN MALE to 7/16" DIN MALE Adaptor 7/16" DIN MALE to 7/16" DIN FEMALE Adaptor 7/16" DIN FEMALE to 7/16" DIN FEMALE Adaptor Tri-Metal Plated Low PIM Tri-Metal Plated Low PIM Tri-Metal Plated Low PIM ZCG Scalar, Head Office, 1 Hall Street, PO Box 7, Lindenow, Victoria, 3865, Australia Telephone (03) 5157-1203, Fax (03) 5157-1641 [email protected] www.zcg.com.au 8229 Section 11 RF MAX Inter Series EIA Adaptors CONNECTORS and ADAPTORS 40 MHz to 1 GHz Updated 08 February 2012 – Page 1 of 4 – RF MAX Inter Series EIA Adaptors are constructed from high quality brass and teflon components providing high level performance and reliability. The adaptors can be used for field testing applications or permanent interconnection between equipment. All of these adaptors are built to order. Combination Kits can be assembled to suit your requirements. KEY FEATURES APPLICATIONS PERFORMANCE ÂÂ High Quality Components ÂÂ Broadcast Measurements ÂÂ Low Thru-Loss : 0.01 dB ÂÂ Frequency Range : 40 MHz – 1 GHz ÂÂ Cellular Measurements ÂÂ Return Loss : < -26 dB over band ÂÂ Characteristic Impedance : 50 Ohm ÂÂ Test and Measurement ÂÂ VSWR : < 0.043:1 ÂÂ Rugged Construction ÂÂ Permanent Interconnection ÂÂ Impedance : 50 Ω ± 2.0 Ω TYPICAL RESPONSE ZCG Scalar, Head Office, 7 Hall Street, PO Box 7, Lindenow, Victoria, 3865, Australia Telephone (03) 5157-1203, Fax (03) 5157-1641 [email protected] www.zcg.com.au Section 11 CONNECTORS and ADAPTORS RF MAX Inter Series 7/8" EIA Adaptors 40 MHz to 1 GHz Updated 08 February 2012 – Page 2 of 4 – EIA78F-NJ EIA78F-NP 7/8" EIA Flanged to N-Type Female Adaptor 500 Watts 7/8" EIA Flanged to N-Type Male Adaptor, includes 7/8" EIA Joining Bullet, 500 Watts EIA78F-716F-SC EIA78F-716M EIA78F716MRA 7/8" EIA Flanged to 7/16" DIN Female Adaptor, includes 7/8" EIA Joining Bullet, 2 kW 7/8" EIA Flanged to 7/16" DIN Male Adaptor, includes 7/8" EIA Joining Bullet, 2 kW 7/8" EIA Flanged to 7/16" DIN Male Right-Angle Adaptor, inc 7/8" EIA Joining Bullet, 2 kW 1680 EIA78 BULLET Joining Bullet Only for 7/8" EIA Connector Bullet Kit for 7/8" EIA Connector, includes O Ring and 3 x Nuts-Bolts-Washers ZCG Scalar, Head Office, 7 Hall Street, PO Box 7, Lindenow, Victoria, 3865, Australia Telephone (03) 5157-1203, Fax (03) 5157-1641 [email protected] www.zcg.com.au Section 11 CONNECTORS and ADAPTORS RF MAX Inter Series 1-5/8" EIA Adaptors 40 MHz to 1 GHz Updated 08 February 2012 – Page 3 of 4 – EIA158F-NJ EIA158U-NJ EIA158U-78F 1-5/8" EIA Flanged to N-Type Female Adaptor 500 Watts 1-5/8" EIA Unflanged to N-Type Female Adaptor 500 Watts 1-5/8" EIA Unflanged to 7/8" EIA Flanged Adaptor 5 Kilowatts EIA158F-78FCPL EIA158U-158F 1-5/8" EIA Flanged to 7/8" EIA Flanged Adaptor 5 Kilowatts 1-5/8" EIA Unflanged to 1-5/8" EIA Flanged Adaptor 5 Kilowatts EIA158 BULLET 3389-3 Joining Bullet for 1-5/8" EIA Flanged Connector Joining Bullet for 1-5/8" EIA Unflanged Connector ZCG Scalar, Head Office, 7 Hall Street, PO Box 7, Lindenow, Victoria, 3865, Australia Telephone (03) 5157-1203, Fax (03) 5157-1641 [email protected] www.zcg.com.au Section 11 CONNECTORS and ADAPTORS RF MAX Inter Series 3-1/8", 4-1/2" and 6-1/8" EIA Adaptors 40 MHz to 1 GHz Updated 08 February 2012 – Page 4 of 4 – EIA318F-NJ EIA318U-NJ EIA318F-78U 3-1/8" EIA Flanged to N-Type Female Adaptor 500 Watts 3-1/8" EIA Unflanged to N-Type Female Adaptor 500 Watts 3-1/8" EIA Flanged to 7/8" EIA Unflanged Adaptor 5 Kilowatts EIA318U-78F EIA318 BULLET EIA318LINE BULLET 3-1/8" EIA Unflanged to 7/8" EIA Flanged Adaptor 5 Kilowatts Joining Bullet Only for 3-1/8" EIA Connector Line Joining Bullet Only for 3-1/8" EIA Connector EIA412U-NJ EIA618F-NJ EIA618U-NJ 4-1/2" EIA Unflanged to N-Type Female Adaptor 500 Watts 6-1/8" EIA Flanged to N-Type Female Adaptor, includes 6-1/8" EIA Bullet, 500 Watts 6-1/8" EIA Unflanged to N-Type Female Adaptor, includes 6-1/8" EIA Bullet, 500 Watts ZCG Scalar, Head Office, 7 Hall Street, PO Box 7, Lindenow, Victoria, 3865, Australia Telephone (03) 5157-1203, Fax (03) 5157-1641 [email protected] www.zcg.com.au