Transcript
ZYBS01
Zonyee Wireless Speaker User Manual
Zonyee ® Ultra Portable Wireless Stereo Pairing Splashproof Bluetooth Speakers with 10W Dual-Drive Heavy Subwoofers, Hands Free Calls, Support A2DP/NFC/TF Card, Dustproof and Shockproof Also
Bluetooth 4.0 chip set connects faster, more stable, compatible with all your Bluetooth-equipped Devices. 8 Watts of total output power driven by two 40mm drivers and a massive passive radiator for incredible sound quality to take sound everywhere you play.
How to use
General Function Desired Result
Required Action
Power on
Press the (Button 1) about 2 seconds
Enter pairing mode
When power on, speaker will into pairing mode automatically
Play/pause
Press (Button 4) to play when the device is pausing and press (Button 4) to pause when the device is playing
Volume up
Long press (Button 5)
Volume down
Long press (Button 3)
Previous song
Short press (Button 3)
Next song
Short press (Button 5)
Turn off
Press the (Button 1) for 3 seconds
Charging indicator Answer a call
Plug the charger to port of the device (three led lights will flash) Press the (Button 2) for 1 second
Hang up a call
Press the (Button 2) for 1 second
Reject a call
Press the (Button 2) for 2 seconds
Hands-free photograph
After connecting speaker to phone via Bluetooth, press the (Button 4 or 2) to photograph
Pairing to a computer and Entertainment 1. If your laptop doesn’t have Bluetooth, you can use a Bluetooth adapter.(Bluetooth adapter not be included) 2. Turn on the device to go to the pairing mode. 3. Open the Bluetooth software (such as BlueSoleil) installed on your laptop, and selects “Search your Bluetooth device” function. Refer to user manual of the Bluetooth software for more information. 4. After a few second the “ZYBS01” will list in Bluetooth software of your laptop as a discovered device. Select this icon and click right button of mouse to select “Pairing” item, then select “connect with audio device” with same operation. 5. Open your media player soft to play music, watch TV/ movie and play game, then all the sound will be playback on your device.
Charging your speaker Make sure your speaker is fully charged for at least 6 hours before initial use. While charging, the white LED lights flash constantly. When charging is completed, the white LED lights would stay.
Technical specification Parameter
Value
Bluetooth Specification
V4.0
Bluetooth file
Support A2DP, HFP, HSP
Output power
Total 8W (2×4W)
Waterproof class
IPX6 Waterproof
Speaker driver
40mm 4Ohm,2×1.5 inch speakers
RF Range
10M/33ft
Frequency Response
68HZ-20KHZ
Signal to noise
≥80dB
Distraction
≤5.0%
Power capacity
2000mAh
Playback time
11 hours (medium volume), 6 hours ( Maximum volume)
Standby time
120 hours
Charging time
3 hours
Dimension
4.8 x 1.8 x 2.5"
Weight
0.77 lb / 350 g
music formats
Support APE/FLAC/WAV lossless music formats, Support TF card, MP3/WMA normal formats
TF memory card
≤32GB
USB
USB2.0/USB1.1
Music format
MP3, WMA, APE, FLAC, WAV
Bit Rate
MP3: 8 Kbps-320 Kbps WMA:32Kbps-384 Kbps APE: 600Kbps-1414 Kbps FLAC: 600 Kbps-1414 Kbps WAV: 32 Kbps-1414 Kbps
Battery indicator
Charging indicator
Mode indicator Turn on: When waiting for comparing, the white indicator flash quickly Pause under Bluetooth mode: The white LED indicator flash slowly Play under TF card: White LED stay Pause under TF card: White LED flash
Play under Aux In: White LED stay Mute under Aux In: White LED flash Max volume: Beeps sound appear
How to pair your devices? 1. Press the power Button for 2 seconds, the white LED indicator will flash 2. Turn on Bluetooth function on cell phone, search the speaker “ZYBS01” and connect it.
TF card mode and play Insert TF card and turn on. Short press. Shift to “TF card mode”, the speaker will play the stored music.
Note: If the speaker is on standby mode, insert the TF card, it will shift to TF card mode automatically.
Line in mode
Long press to turn on speaker, press the Button 1 to shift the “Line in mode”, then use the audio cable to play music.
FAQ Question 1: Why is there no power even when the stereo speaker is power on? Answer: Ensure the battery is being charged 3 hours for first time use. The LED is lighted when it starts charging. Question 2: There is no sound when playback Answer: Check the connection between your device with phone or computer, if the connection is not established, please reconnect again. Make sure the speaker is paired and connected target phone or other master device.
Question 3: Fail to pair speaker Answer: 1. Restart speaker 2. If password needed, please input “0000” Question 3: Music break off Answer: Bluetooth working range is 33ft/10M, please play it within this area Question 4: No sound Answer: Check the volume adjustment; Speaker may paused Question 5: Where is the volume control button Answer: Long press towards the track buttons for 5 seconds to get the volume down or up Question 6: Music stops every several seconds Answer: Reset the speaker with metal sticker to reset it
