Transcript
Bluetooth Remote Control User Guide
1
About This Manual Thank you for choosing this ZTE device! Before using the remote control and the projector, please read this manual carefully and keep it for future reference.
Copyright Copyright © 2015 ZTE CORPORATION All rights reserved. No part of this publication may be quoted, reproduced, translated or used in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation.
Notice ZTE Corporation reserves the right to make modifications on print errors or update specifications in this guide without prior notice. This manual has been designed with the utmost care to ensure the accuracy of its content. However, all statements, information and recommendations contained therein do not constitute a warranty of any kind, either expressed or implied. Please be sure to use the device properly and safely. We offer self-service for our smart terminal device users. Please visit the ZTE official website (at www.zteusa.com) for more information on self-service and supported product models. Information on the website takes precedence.
Disclaimer ZTE Corporation expressly disclaims any liability for faults and damages caused by unauthorized modifications of the software.
2
Images and screenshots used in this manual may differ from the actual product. Content in this manual may differ from the actual product or software.
Trademarks ZTE and the ZTE logos are trademarks of ZTE Corporation. Google and Android are trademarks of Google, Inc. The Bluetooth® trademark and logos are owned by the Bluetooth SIG, Inc. and any use of such trademarks by ZTE Corporation is under license. Qualcomm® Snapdragon™ processors are products of Qualcomm Technologies, Inc. Qualcomm and Snapdragon are trademarks of Qualcomm Incorporated, registered in the United States and other countries. Used with permission. DLP is the trademark of Texas Instruments.
microSDHC Logo is a trademark of SD-3C, LLC. Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories. Other trademarks and trade names are the property of their respective owners. Version No.: R1.0 Edition: December 21, 2015
3
Contents Getting Started .........................................................5 Getting to Know the Bluetooth 3 Remote Control ............... 5 Button Action ..................................................................... 6
Before you begin … .................................................8 LED Color Indicators ...............................................9 Product Specifications ..........................................10
4
Getting Started Getting to Know the Bluetooth 3 Remote Control . Power
Laser
Up
Left
Right OK
Home Down
Return
Menu
Back
Forward
Pause & Play Volume Down
Volume Up
5
Button Action Button
Function
Power
Turn the projector on and off
Laser
Laser pointer
Up
Move up on the screen
Down
Move down on the screen
Left
Move left on the screen
Right
Move right on the screen
OK
Choose the selection
Return
Return to previous screen
Home
Move to the home screen
Menu
Display the menu
Back
Select the previous video
Play/Pause
Stop and continue the video
Forward
Select the next video
Volume Up
Increase the volume
Volume Down
Decrease the volume
6
Place finger here and move cover up to insert two AAA batteries (included).
7
Before you begin … Before using the remote control with the Spro2, you must use Bluetooth settings to sync the remote control and the Spro2. To do so: 1.
Press OK and the Home button for two seconds. The Spro2 displays available devices with which to pair. 2. Choose Spro Remote Controller. The remote enters rapid pairing mode and connects through Bluetooth to the projector. The green LED flashes three times to indicate connection success. If the devices fail to connect and pair, the remote controls exits pairing mode and goes into an idle state. Repeat the pairing attempt. The Spro2 goes into idle mode after five seconds of inactivity.
8
LED Color Indicators Status Replace batteries
Red or Green LED Indicator Green LED stays bright for 2s
Fast pairing
Paring is successful when the green LED flashes Pairing failed when it times out and the green light turns off
Conventional pairing
Pairing is successful when the green LED flashes at an interval of bright for 1 second and off a half second. The green light turns off when pairing times out.
Paired success state
Green LED on for 2 seconds
Working status Low battery state <2.3V
Press any button, red indicator light flashes once, about 0.2s Red LED flashes
9
Product Specifications Working voltage range
2.1V -- 3.0V
Low voltage
2.3V
Automatic shutdown voltage
2.1V
Fast pairing state duration
3 seconds
Conventional pairing state duration
2 minutes
No key operation when connected
10 minutes
Goes into hibernation after
1-2 seconds
Return time
5 seconds
10
